Sights
-
Holosun – Open Reflex Sight 407COMP – 6 MOA Red Dot – Shake Awake – Black – HE407COMP-RD
€ 351,90 Add to cartHolosun – Open Reflex Sight 407COMP – 6 MOA Red Dot – Shake Awake – Black – HE407COMP-RD
The Holosun 407COMP reflex sight features a large 6 MOA reticle. Due to the size of the aiming point, it is ideal for dynamic close-range shooting. Additionally, the integrated Shake Awake sensor saves battery life when the sight remains mounted on the weapon and is inactive for an extended period.
The sight housing is made of 7075-T6 aluminum alloy, with seals meeting the IP67 protection standard. The sight is equipped with a 6 MOA reticle displayed by a high-performance LED emitter. The position of the reticle on the lens can be adjusted vertically and horizontally within a +/- 30 MOA range in 1 MOA increments per click.
The sight is powered by a CR1632 battery, which can be replaced via a side tray without removing it from the weapon. An efficient energy management system allows for up to 50,000 hours of operation on a single battery. The sight mount is compatible with the RMR footprint and maintains a low profile on compatible Optics Ready rails. This means it works best with small arms and compatible holsters.
Features:
- Open reflex sight 407COMP with a large objective and RMR footprint
- Aiming based on a 6 MOA dot
- The sight housing is made of 7075-T6 aluminum alloy
- Flat top with a lens-shielding extension
- Multi-coated lens
- Sealed construction meeting IP67 protection class
- Battery life up to 50,000 hours
- Shake Awake sensor automatically saves battery when no movement is detected
- CR1632 battery can be replaced via the side tray without removing the sight
- Manual 8-level brightness adjustment mode, including 4 levels for NV mode
The HE407C X3 reflex sight is the natural successor to the Holosun X2. Compared to the previous version, the top plate has been flattened and extended, providing greater impact resistance. Additionally, an integrated light sensor allows for automatic brightness adjustment. The sight’s electronics, combined with a solar panel, extend battery life up to 100,000 hours.
The sight housing is made of 7075-T6 aluminum alloy, and the seals meet the IP67 protection standard. The sight is equipped with a 2 MOA reticle displayed by a high-performance LED emitter. The position of the reticle on the lens can be adjusted vertically and horizontally within a +/- 50 MOA range in 1 MOA increments per click.
The sight is powered by a hybrid power source based on a solar cell and CR1632 batteries. An efficient energy management system allows for up to 100,000 hours of operation on a single battery. The red dot sight mount is compatible with the RMR footprint and maintains a low profile when used with compatible Optics Ready bases. This means it works best with subcompact firearms and compatible holsters.
Features:
-
- Open reflex sight HE407C X3 version with RMR footprint
- Aiming based on a 2 MOA dot
- The sight housing is made of 7075-T6 aluminum alloy
- Flat top with a lens-shielding extension
- Multi-coated lens
- Sealed construction meeting IP67 protection class
- Light sensor for automatic brightness adjustment
- Hybrid battery and solar cell power supply with up to 100,000 hours of runtime
- Shake Awake sensor automatically saves battery when no movement is detected
- CR1632 battery replacement via the side tray without removing the sight
- Manual brightness adjustment with 10 levels, including 2 for NV mode
-
Holosun – Open Reflex Sight 407COMP – 6 MOA Green Dot – Shake Awake – Black – HE407COMP-GR
€ 376,90 Add to cartHolosun – Open Reflex Sight 407COMP – 6 MOA Green Dot – Shake Awake – Black – HE407COMP-GR
The Holosun 407COMP reflex sight features a large 6 MOA reticle. Due to the size of the aiming point, it is ideal for dynamic close-range shooting. Additionally, the integrated Shake Awake sensor saves battery life when the sight remains mounted on the weapon and is inactive for an extended period.
The sight housing is made of 7075-T6 aluminum alloy, with seals meeting the IP67 protection standard. The sight is equipped with a 6 MOA reticle displayed by a high-performance LED emitter. The position of the reticle on the lens can be adjusted vertically and horizontally within a +/- 30 MOA range in 1 MOA increments per click.
The sight is powered by a CR1632 battery, which can be replaced via a side tray without removing it from the weapon. An efficient energy management system allows for up to 50,000 hours of operation on a single battery. The sight mount is compatible with the RMR footprint and maintains a low profile on compatible Optics Ready rails. This means it works best with small arms and compatible holsters.
Features:
- Open reflex sight 407COMP with a large objective and RMR footprint
- Aiming based on a 6 MOA dot
- The sight housing is made of 7075-T6 aluminum alloy
- Flat top with a lens-shielding extension
- Multi-coated lens
- Sealed construction meeting IP67 protection class
- Battery life up to 50,000 hours
- Shake Awake sensor automatically saves battery when no movement is detected
- CR1632 battery can be replaced via the side tray without removing the sight
- Manual 8-level brightness adjustment mode, including 4 levels for NV mode
The HE407C X3 reflex sight is the natural successor to the Holosun X2. Compared to the previous version, the top plate has been flattened and extended, providing greater impact resistance. Additionally, an integrated light sensor allows for automatic brightness adjustment. The sight’s electronics, combined with a solar panel, extend battery life up to 100,000 hours.
The sight housing is made of 7075-T6 aluminum alloy, and the seals meet the IP67 protection standard. The sight is equipped with a 2 MOA reticle displayed by a high-performance LED emitter. The position of the reticle on the lens can be adjusted vertically and horizontally within a +/- 50 MOA range in 1 MOA increments per click.
The sight is powered by a hybrid power source based on a solar cell and CR1632 batteries. An efficient energy management system allows for up to 100,000 hours of operation on a single battery. The red dot sight mount is compatible with the RMR footprint and maintains a low profile when used with compatible Optics Ready bases. This means it works best with subcompact firearms and compatible holsters.
Features:
-
- Open reflex sight HE407C X3 version with RMR footprint
- Aiming based on a 2 MOA dot
- The sight housing is made of 7075-T6 aluminum alloy
- Flat top with a lens-shielding extension
- Multi-coated lens
- Sealed construction meeting IP67 protection class
- Light sensor for automatic brightness adjustment
- Hybrid battery and solar cell power supply with up to 100,000 hours of runtime
- Shake Awake sensor automatically saves battery when no movement is detected
- CR1632 battery replacement via the side tray without removing the sight
- Manual brightness adjustment with 10 levels, including 2 for NV mode
-
Holosun – Open Reflex Sight HS507C X3 – MRS Green Dot – Solar Panel – Black – HS507C-X3-GR
€ 419,99 Add to cartHolosun – Open Reflex Sight HS507C X3 – MRS Green Dot – Solar Panel – Black – HS507C-X3-GR
The HS507C X3 reflex sight is the natural successor to Holosun’s X2. Compared to the previous version, the top plate has been flattened and extended for greater impact resistance. Additionally, an integrated light sensor allows for automatic brightness adjustment. The sight’s electronics, combined with the solar panel, extend battery life up to 100,000 hours.
The housing is made of 7075-T6 aluminum alloy, and the seals meet the IP67 protection standard. Thanks to the Multi-Reticle System (MRS), the sight offers three reticle options: a 2 MOA dot, a 32 MOA circle, or a combination of both. The lens position can be adjusted vertically and horizontally within a +/- 50 MOA range at 1 MOA per click.
The sight is powered by a hybrid power source based on a solar cell and CR1632 batteries. An efficient energy management system allows for up to 100,000 hours of operation on a single battery. The red dot sight mount is compatible with the RMR footprint and maintains a low profile when used with compatible Optics Ready bases. This means it works best with subcompact firearms and compatible holsters.
Features:
- Open reflex sight in HS507C X3 version with RMR footprint
- MRS Multi-Reticle System allows selection of a dot, circle, or a combination of the two.
- The sight housing is made of 7075-T6 aluminum alloy
- Flat top with extension to protect the lens
- Multi-coated lens
- Sealed construction meeting IP67 protection class
- Light sensor for automatic brightness adjustment
- Hybrid battery and solar cell power supply with up to 100,000 hours of runtime
- Shake Awake sensor automatically saves battery when no movement is detected
- CR1632 battery can be replaced via the side tray without removing the sight
- Manual brightness adjustment with 12 levels, including 4 for NV modes
-
Holosun – HS507C X3 Open Reflex Sight – MRS Red Dot – Solar Panel – Black – HS507C-X3-RD
€ 374,00 Add to cartHolosun – HS507C X3 Open Reflex Sight – MRS Red Dot – Solar Panel – Black – HS507C-X3-RD
The HS507C X3 reflex sight is the natural successor to Holosun’s X2. Compared to the previous version, the top plate has been flattened and extended for greater impact resistance. Additionally, an integrated light sensor allows for automatic brightness adjustment. The sight’s electronics, combined with the solar panel, extend battery life up to 100,000 hours.
The housing is made of 7075-T6 aluminum alloy, and the seals meet the IP67 protection standard. Thanks to the Multi-Reticle System (MRS), the sight offers three reticle options: a 2 MOA dot, a 32 MOA circle, or a combination of both. The lens position can be adjusted vertically and horizontally within a +/- 50 MOA range at 1 MOA per click.
The sight is powered by a hybrid power source based on a solar cell and CR1632 batteries. An efficient energy management system allows for up to 100,000 hours of operation on a single battery. The red dot sight mount is compatible with the RMR footprint and maintains a low profile when used with compatible Optics Ready bases. This means it works best with subcompact firearms and compatible holsters.
Features:
- Open reflex sight in HS507C X3 version with RMR footprint
- MRS Multi-Reticle System allows selection of a dot, circle, or a combination of the two.
- The sight housing is made of 7075-T6 aluminum alloy
- Flat top with extension to protect the lens
- Multi-coated lens
- Sealed construction meeting IP67 protection class
- Light sensor for automatic brightness adjustment
- Hybrid battery and solar cell power supply with up to 100,000 hours of runtime
- Shake Awake sensor automatically saves battery when no movement is detected
- CR1632 battery can be replaced via the side tray without removing the sight
- Manual brightness adjustment with 12 levels, including 4 for NV modes
-
Holosun – Open Reflex Sight HE407C X3 – 2 MOA Red Dot – Solar Panel – Black – HE407C-X3-RD
€ 315,00 Add to cartHolosun – Open Reflex Sight HE407C X3 – 2 MOA Red Dot – Solar Panel – Black – HE407C-X3-RD
The HE407C X3 reflex sight is the natural successor to the Holosun X2. Compared to the previous version, the top plate has been flattened and extended, providing greater impact resistance. Additionally, an integrated light sensor allows for automatic brightness adjustment. The sight’s electronics, combined with a solar panel, extend battery life up to 100,000 hours.
The sight housing is made of 7075-T6 aluminum alloy, and the seals meet the IP67 protection standard. The sight is equipped with a 2 MOA reticle displayed by a high-performance LED emitter. The position of the reticle on the lens can be adjusted vertically and horizontally within a +/- 50 MOA range in 1 MOA increments per click.
The sight is powered by a hybrid power source based on a solar cell and CR1632 batteries. An efficient energy management system allows for up to 100,000 hours of operation on a single battery. The red dot sight mount is compatible with the RMR footprint and maintains a low profile when used with compatible Optics Ready bases. This means it works best with subcompact firearms and compatible holsters.
Features:
-
- Open reflex sight HE407C X3 version with RMR footprint
- Aiming based on a 2 MOA dot
- The sight housing is made of 7075-T6 aluminum alloy
- Flat top with a lens-shielding extension
- Multi-coated lens
- Sealed construction meeting IP67 protection class
- Light sensor for automatic brightness adjustment
- Hybrid battery and solar cell power supply with up to 100,000 hours of runtime
- Shake Awake sensor automatically saves battery when no movement is detected
- CR1632 battery replacement via the side tray without removing the sight
- Manual brightness adjustment with 10 levels, including 2 for NV mode
-
-
Holosun – Open Collimator HE407C X3 – 2 MOA Green Dot – Solar Panel – Black – HE407C-X3-GR
€ 345,00 Read moreHolosun – Open Collimator HE407C X3 – 2 MOA Green Dot – Solar Panel – Black – HE407C-X3-GR
Collimator HE407C in the X3 version, the natural successor to the X2 from Holosun. Compared to the previous version, the top plate has been flattened and lengthened, resulting in greater impact resistance. Additionally, an integrated light sensor allows for automatic adjustment of the reticle brightness. The sight’s electronics, combined with the solar panel, extend battery life to up to 100,000 hours.
The reticle housing is made of 7075-T6 aluminum alloy, with seals meeting the IP67 rating standard. The sight is equipped with a 2 MOA reticle displayed by a high-performance LED emitter. The reticle position on the lens can be adjusted vertically and horizontally within a range of +/- 50 MOA in 1 MOA increments per click.
The sight is powered by a hybrid power source based on a solar cell and CR1632 batteries. An efficient power management system allows for up to 100,000 hours of operation on a single battery. The red dot sight’s mounting is compatible with the RMR footprint, and when used on compatible Optics Ready mounts, it maintains a low profile. This means it works best on subcompact firearms and compatible holsters.
Features:
- Open collimator HE407C in the X3 version with an RMR footprint
- Aiming based on a 2 MOA dot
- Sight housing made of 7075-T6 aluminum alloy
- Flat top with an extension shielding the lens
- Multi-coated lens
- Sealed construction meeting the IP67 protection rating
- Light sensor for automatic adjustment of reticle brightness
- Hybrid battery and solar cell power supply with an operating time of up to 100,000 hours
- Shake Awake sensor automatically conserves battery power when no movement is detected
- CR1632 battery replacement via a side tray without removing the collimator
- Manual reticle brightness adjustment with 10 levels, including 2 for NV mode
-
Holosun HS510C MRS Open Reflex Red Dot Sight – FDE – HS510C-FDE-R
Original price was: € 419,00.€ 385,00Current price is: € 385,00. Add to cartHolosun HS510C MRS Open Reflex Red Dot Sight – FDE – HS510C-FDE-R
The HS510C Multi Reticle Sight is a top-tier optic from Holosun. Designed for use in the toughest conditions, this open reflex sight for long guns features an additional titanium hood. The electronic control system combined with a powerful LED ensures high performance and stable, long-term operation.
The system is powered by a single 2032 battery, offering up to 50,000 hours of battery life at intensity level six. The sight features an advanced lens system with multilayer anti-reflective coatings, ensuring excellent light transmission. The image through the lens is clear, bright, and parallax-free.
Features:
- Lens: 32 × 24 mm
- Reticle types: Dot with circle / Dot / Circle
- Reticle size: 2 MOA dot, 65 MOA circle
- Light source: LED
- Eye relief: Unlimited
- Adjustment: ½ MOA per click
- Travel range: ±40 MOA from center
- Parallax: ⩽±1 MOA
- Coating: Multilayer
- Magnification: 1×
- Power source: Solar cell, CR2032 battery
- Battery life:
- 50,000 h (dot, medium brightness)
- Mounting rail: Picatinny / Weaver
- Dimensions: 84 × 65 × 40 mm
- Weight: 205 g
- Housing color: Black / Tan
-
KECOTEH – Protective Cover – HS507 Competition – Black
€ 8,00 Add to cartKECOTEH – Protective Cover – HS507 Competition – Black
Polymer cover for Holosun 507COMP sights. Protects the weapon-mounted sight during transport without disassembling it and losing zeroing. Protects against mechanical damage, dirt, rain and accidental activation. Being made of lightweight and durable TPU material, it does not significantly affect the weight of the weapon.
Features:
- Red dot sight cover
- Elastic
- Wear-resistant
- Allows you to protect the sight from moisture and damage
- Made of lightweight and durable TPU material
- Fitted design to prevent slipping during transport
- Designed for Holosun 507COMP sights
-
Holosun 507 Competition Red Dot Sight
Original price was: € 517,00.€ 459,00Current price is: € 459,00. Add to cartHolosun 507 Competition Red Dot Sight
The Holosun 507 Comp-RD is a compact red dot sight with a low profile and rugged design. It features the Competition Reticle System (CRS), offering 8 different modes and 10 brightness levels
Features:
- Dimensions: 45 × 33 × 33 mm
- Objective lens size: 22 × 28 mm
- Weight: 75 g
Package includes:
-
- 1× 507 Comp-RD red or green dot sight
- 1× lens cleaning cloth
- 1× Torx T10 key
- 1× set of long mounting screws
- 1× set of short mounting screws
- 1× CR1632 battery
- User manual
- Warranty brochure
Available in both red and green dot models
-
Daniel Defense 1 O’clock Offset Rail (Rock & Lock)
€ 74,90 Add to cartDaniel Defense 1 O’clock Offset Rail (Rock Lock)
The Daniel Defense 1 O’clock Offset Rail is optimized for mounting miniature red dot optics at the 1 o’clock (right-hand) or 11 o’clock (left-hand) positions for quick, non-magnified transitions when using magnified primary optics on AR-style rifles with MIL-STD-1913 rails. The geometry allows for zero cheek weld shift during transition, facilitating ultra-fast transitions from magnified to non-magnified optics and back. The 1 O’clock Offset Rail can also be used to mount various lights or other MIL-STD-1913 rail-mounted accessories. By flipping the part, a light can be positioned for use with a vertical foregrip.
-
Vector Optics – Continental x6 6-36x FFP PRS Rifle Scope – VET-MBR 2 – Black – SCFF-70
€ 775,00 Add to cartVector Optics – Continental x6 6-36x FFP PRS Rifle Scope – VET-MBR 2 – Black – SCFF-70
The Vector Optics Continental scope, with a base magnification factor of x6, offers variable magnification from 6–36x. This design is suitable for both shooters and hunters due to the ability to adjust magnification according to the situation. The 56 mm diameter lens has a high visible light transmission of 90%.
The manufacturer has equipped the scope with a VET-MBR 2 reticle featuring a red illuminated aiming point in the first focal plane (FFP). It has lines corresponding to the given MIL value regardless of magnification. This is possible due to the reticle’s position in the first focal plane, meaning it scales according to the magnification range.
Features:
- Continental rifle scope with 6x magnification
- Precise 1/10 MIL per click adjustment ideal for PRS competitions
- Magnification range 6–36x
- 56 mm objective lens diameter
- Illuminated reticle on VET-MBR 2
- FFP first focal plane reticle
- Schott HT lenses with FMC coating
- 90% visible light transmission
- Shock resistance up to 1,000 G
- 11-step reticle illumination adjustment
- Durable aluminum housing with IP67-rated seal
- 34 mm tube diameter compatible with Picatinny standard
- Nitrogen-filled interior
Included:
- Continental range
- Picatinny rail mount
- Lens cover
- Lens cover
- User manual
-
Vector Optics – Constantine HD 1-10×24 LPVO Scope – FFP – VCO-2 MIL – Black – SCFF-42
€ 399,00 Add to cartVector Optics – Constantine HD 1-10×24 LPVO Scope – FFP – VCO-2 MIL – Black – SCFF-42
Vector Optics – Constantine HD 1-10×24 LPVO Scope suitable for use at various distances thanks to its variable 1-10x magnification and true 10x zoom factor. This design is particularly well-suited for dynamic shooting where the user moves frequently. The versatile magnification allows for adjustment based on the target distance.
The 24 mm objective lens uses LaREE HD glass with FMC coating. This combination features a high visible light transmission rate, allowing the scope to be used in low-light conditions, such as at sunset. The scope’s construction is nitrogen-filled, making the lenses resistant to internal fogging.
The manufacturer has equipped the scope with an illuminated VCO-2 MIL reticle located in the first focal plane (FFP). This reticle scales with the zoom, allowing for precise aiming in the MIL system. This enables correct adjustments when necessary. Access to the adjustment turrets is located under the caps on the side and top of the body.
The scope can be adjusted over a range of approximately 35 MIL with 1/10 MIL clicks. Additionally, the eyepiece diopter can be adjusted from -2.5 to +2.5. The aluminum housing has a 30 mm diameter, making it compatible with a wide range of scope mounts available on the market. The sealed 6061 T-6 aluminum body meets the IP67 waterproof standard. Furthermore, the device can withstand shocks up to 1000 G.
Features:
- LPVO scope with a wide magnification adjustment range
- 1–10x magnification
- 24 mm objective diameter with LaREE HD glass lenses
- FMC-coated lenses
- Illuminated VCO-2 MIL reticle
- First Focal Plane (FFP) reticle
- High visible light transmission
- Shock resistance up to 1,000 G
- 11-level reticle illumination adjustment
- Durable aluminum housing with IP56-standard sealing
- 30 mm tube diameter compatible with many mounts
- Nitrogen-filled optics
Set components:
- Constantine LPVO scope
- Cleaning cloth
- Lens cover
- User manual
https://youtu.be/Ji6NchzVojE
-
Holosun HS510C MRS Open Reflex Sight, Red Dot – Black
Original price was: € 419,00.€ 385,00Current price is: € 385,00. Add to cartHolosun HS510C MRS Open Reflex Sight, Red Dot – Black
The HS510C Multi Reticle Sight is a top-tier optic from Holosun. Designed for use in the toughest conditions, this open reflex sight for long guns features an additional titanium hood. The electronic control system combined with a powerful LED ensures high performance and stable, long-term operation.
The system is powered by a single 2032 battery, offering up to 50,000 hours of battery life at intensity level six. The sight features an advanced lens system with multilayer anti-reflective coatings, ensuring excellent light transmission. The image through the lens is clear, bright, and parallax-free.
Features:
- Lens: 32 × 24 mm
- Reticle types: Dot with circle / Dot / Circle
- Reticle size: 2 MOA dot, 65 MOA circle
- Light source: LED
- Eye relief: Unlimited
- Adjustment: ½ MOA per click
- Travel range: ±40 MOA from center
- Parallax: ⩽±1 MOA
- Coating: Multilayer
- Magnification: 1×
- Power source: Solar cell, CR2032 battery
- Battery life:
- 50,000 h (dot, medium brightness)
- Mounting rail: Picatinny / Weaver
- Dimensions: 84 × 65 × 40 mm
- Weight: 205 g
- Housing color: Black / Tan
-
Holosun – HE510C-GR Elite Reflex Sight – Solar Panel – Green Dot
€ 455,00 Add to cartHolosun – HE510C-GR Elite Reflex Sight – Solar Panel – Green Dot
The Holosun HE510C-GR Elite is an open reflex sight featuring three reticle options: a classic 2 MOA dot, a 65 MOA circle, and a combination of both. The sight is equipped with an advanced lens system with multiple anti-reflective coatings to ensure a clear and bright image. For additional power, it features a built-in solar cell and a green aiming point.
Features:
- Objective lens 32 x 24 mm
- Reticles: Circle-dot, dot, circle
- Dot size: 2 MOA dot, 65 MOA circle
- Light source: LED
- Eye relief: Unlimited
- Adjustment: 1/2 MOA / click
- Travel range: ±40 MOA from center
- Parallax: ±1 MOA
- Coatings: Multi-layer
- Magnification: 1X
- Power source: Solar cell and CR2032 battery
- Battery life: 50,000 h (dot, medium brightness), 20,000 h (dot and circle, medium brightness)
- Operating modes: Auto and manual
- Auto-off: After 10 minutes of inactivity
- Brightness settings: 10 DL + 2 NV compatible
- Housing: T6061-T6 aluminum, titanium hood
- Housing finish: MAO (Micro-arc oxidation)
- Mount: QD lever
- Housing color: Black
- Buttons: Two low-profile rubber buttons on the side
- Battery: Secured in a tray with two screws
- Mounting rail: Picatinny / Weaver
- Water resistance: IP67
- Operating temperature: -10 °C to 50 °C
- Storage temperature: -40 °C to 70 °C
- Vibration resistance: Up to 1000 G
- Dimensions: 84 x 65 x 40 mm
- Weight: 205 g
Included:
HE510C-GR Elite Green Dot
Spare battery tray (with screws)
CR2032 battery
Torx key
Adjustment tool -
Vector Optics – Picatinny 45° Mount for Pistol Red Dot Sights
€ 28,90 Add to cartVector Optics – Picatinny 45° Mount for Pistol Red Dot Sights – Black – SCFRM-29
Universal offset mount for pistol red dot sights by Vector Optics. Designed for mounting a secondary sight at a 45° angle on an AR Picatinny rail. It is primarily compatible with the Vector Optics Frenzy series, as well as sights following the MGT/MOJ/TEK/GIN footprint standards. It is made of 7075-T6 aluminum with an anodized finish.
The 45° offset allows for a quick transition from the primary optic to a backup red dot sight. Additionally, the 45° configuration enables intuitive weapon canting without compromising ergonomics in dynamic situations.
Features:
- Universal Picatinny rail mount for pistol red dot sights
- Compatible with MGT/MOJ/TEK/GIN standards
- 45° offset angle
- Enables quick transition from primary to secondary sight
- Made of 7075-T6 aluminum
- Anodized finish
- Dimensions 59 x 52 x 24 mm
- Mount base dimensions 52 x 28 mm
- Weight 36 g
- Color: Black
-
Vector Optics – Frenzy & Sphinx Mount Base for HK USP
€ 30,90 Add to cartVector Optics – Frenzy & Sphinx Mount Base for HK USP SCRDM-07
A red dot sight mounting plate made entirely of aluminum. Replaces the original rear sight on HK USP pistols.
Features:
- Designed for specific mini red dot sights, such as the SCRA-10A Sphinx and Frenzy series.
- For use on firearms.
- Designed for HK USP pistols.
- Two mounting screws included.
- Full metal construction.
Technical data:
Distance between pins: 40 x 20 mm
Lenght: 46,1 mm
Thickness: 3 mm
Color: black
Weight: 12 g
-
Vector Optics – Frenzy 1x22x26 MOS punapunktsihik – Picatinny
€ 169,90 Add to cartVector Optics – Frenzy 1x22x26 MOS red dot
SCRD-36
Lightweight open type red dot sight with 3 MOA dot. The sight has 8 levels suitable for daylight and 2 modes suitable for use with night vision devices. A Picatinny rail mount is included.
Powered red dot sight made of 6061-T6 aluminum and powered by a single CR2032 battery. The waterproof unit is equipped with an auto shut-off feature to extend battery life.
Note: Product comes with a lifetime T-VIP manufacturer warranty.
Features:
- Sturdy 6061-T6 aluminum construction
- 3 MOA dot size
- Large viewfinder measuring 22 x 26 mm
- 10 aiming dot brightness levels – 8 for daylight and 2 for night vision
- Until 20,000 hr operation on one CR2032 battery in daylight mode on the setting with the weakest dot
- Low profile
- Ultralight weighing
- Weaver mount
- Waterproof standard IP67
- The device has a motion sensor with an automatic auto-off function after 2 minutes of inactivity
Included:
Red Dot Sight
Picatinny mount
Allen wrenches
Warranty card
Rubber sight cover
Cleaning cloth -
Vector Optics – Riflescope Constantine 1-8×24 – 30 mm – FFP
€ 319,00 Add to cartVector Optics – Riflescope Constantine 1-8×24 – 30 mm – FFP
FFP – SCFF-32
The Constantine 1-8×24 30 mm FFP riflescope offers a magnification of 1-8x and allows both open-eye aiming with both eyes open in the absence of magnification and accurate shooting at further distances. The 24 mm objective lens with FMC-coated lenses provides good light transmission and clear contrast and clarity. The scope’s small size does not interfere with carrying a weapon with optics in a tactical bag.
The field of view is 35.78-4.54 meters at 100 meters, and the eye relief of 90 mm allows comfortable aiming. The VOF-EHT sighting reticle with LED illumination offers 11 levels of intensity, allowing you to adjust it to the lighting conditions. The 100m parallax adjustment minimizes errors when shooting at medium distances.
The vertical and horizontal adjustment range is 35 MIL, with a 1/10 MIL clique value for accurate sight alignment. The 30mm diameter tube is made of anodized 6061-T6 aluminum. The design is shockproof to 1,000 G, IPX6 waterproof and nitrogen-filled to prevent lens evaporation. The scope comes with a Weaver mount and lens caps. Power is provided by a CR2032 battery.
Features:
- VOF-EHT reticle rifle scope with FFP layout
- Magnification of 1-8x allows fast targeting at medium distances
- 24mm objective lens provides good light transmission in a compact size
- Multi-coated lenses improve contrast and image clarity
- Field of view 35.78-4.54 m at 100 m
- Eye relief distance of 90 mm for comfortable aiming
- Illumination of the targeting reticle at 11 intensity levels
- 100m parallax adjustment minimizes errors when shooting at medium distances
- Vertical and horizontal adjustment range of 35 MIL
- 1/10 MIL click value allows for accurate sight alignment
- Shock-resistant design up to 1000 G, made of anodized 6061-T6 aluminum
- Waterproof to IPX6 rating
- Nitrogen filling to prevent lens fogging
- Weaver mount and lens caps included
- Powered by a CR2032 battery
-
Vector Optics – Red Dot Pistol Mount Base for Glock – SCRDM-01
€ 28,90 Add to cartVector Optics – Red Dot Pistol Mount Base for Glock – SCRDM-01
SCRDM‑01
Mounting plate for reflex sight made entirely of aluminum. Mounted in the place of the original rear sight in Glock type handguns.
Features:
- Made for specific mini red dot sights such as the SCRA-10A Sphinx and Frenzy series.
- For use on firearms.
- Designed for Glock pistols.
- Two mounting screws included.
- Made entirely of metal.
Features:
-
- Distance between poles: 40 x 20 mm
- Lenght: 46,1 mm
- Thickness: 3 mm
- Material: alumiinium
- Color: black
- Weight: 12 g
-
Vector Optics – Mounting Adapter for CZ Shadow/Shadow 2/SP-01/P-10C – Black – SCFRM-21
€ 33,90 Add to cartVector Optics – Mounting Adapter for CZ Shadow/Shadow 2/SP-01/P-10C – Black – SCFRM-21
A universal plate for mounting collimators to the Frenzy-X series pistol and MGT/MOJ/TEK/GIN standard from Vector Optics. A series of marked holes along with instructions allow you to easily identify the mounting point for your collimator. It is made of milled 7075-T6 aluminum alloy with an anodized surface.
Technical data Compatibility CZ Shadow 2 Compact®
CZ Shadow 2 Standard®
CZ Shadow 2 Optics Ready Compact®
CZ Shadow 2 Optics Ready Standard®
CZ 75 Shadow®
CZ 75 SP-01®
CZ P-10 C®Mounting Frenzy-X
MGT
MOJ
TEK
GINMounting plate dimensions 52 x 28 mm Material Aluminum 7075-T6 Weight 12 g Color Black -
Vector Optics – Extreme High AR Scope Mount 30 mm – Picatinny – Black
€ 39,90 Add to cartVector Optics – Extreme High AR Scope Mount 30 mm – Picatinny – Black
A one-piece scope mount with a 30mm tube, primarily for the AR platform from Vector Optics. Its elongated design allows to increase the distance of the eye from the scope’s eyepiece. The execution of the mount’s body from milled 6061-T6 aluminum has preserved high rigidity, which is crucial when withstanding the loads generated when the weapon is fired.
Features:
- One-piece scope mount that raises the aiming line by 50 mm
- Picatinny standard mount, based on two strikers
- CNC machined from 6061-T6 aluminum alloy
- Extended design allows for increased eye relief
- Compatible with 30mm diameter tubes
- Each mounting ring has been secured with four screws
- Construction bolted with Torx T15 screws
Technical data Tube diameter 30 mm Height of the aiming line 50 mm
1,97″Mounting Picatinny Ring spacing 73 mm Spacing between mounting lugs 50 mm Mounting screws Torx T15 Screw tightening torque 2 to 2.4 Nm Dimensions 140 x 72 x 45 mm Material Aluminum 6061-T6 Weight 161 g Color Black -
Holosun – Protection Cap – 507C
€ 8,50 Add to cartHolosun – Protection Cap – 507C
Polymer cover for Holosun 507C collimators. Protects the weapon-mounted collimator during transport without removing it and losing zeroing. Protects against mechanical damage, dirt, rain and accidental activation. Being made of lightweight and durable polymer, it does not significantly affect the weight of the weapon.
Features:
- Cover for collimator sight
- Allows you to protect the collimator from moisture and damage
- Made of lightweight, durable polymer
- Fitted design to prevent slipping during transport
- Designed for Holosun 507C collimators
-
Holosun – Magnifier 3x HM3X – Flip & Picatinny QD – Black – HM3X
€ 295,00 Add to cartHolosun HM3X Flip-Up Red Dot Magnifier
Mounted at the same height as the sight, it provides a constant 3× optical magnification. This allows a red dot sight to be converted into a low-magnification telescope. Unlike a spotting scope solution, the advantage of this setup is that the magnifier can simply be flipped aside when needed, making the primary sight immediately usable again.
Features:
- Magnification: 3×
- Mount: Picatinny QD
- Weaver QD
- VLT light transmission: 75%
- Exit pupil diameter: 73 mm
- Exit pupil distance: 69.8 mm
- Field of view: 7°
- Linear field of view at 100 m: 12.32 m
- Eye relief: 70 mm
- Diopter correction: +/- 3
- Protection class: IP67
- Housing material: Aluminum
- Finish: MAO (Micro Arc Oxidation)
- Dimensions: 99 × 41 × 60 mm
- Weight: 278 g
- Color: Black
-
Vector Optics – Open Collimator Frenzy-S 1x19x28 – MGT – Picatinny – Black – SCRD-66
€ 139,90 Add to cartVector Optics – Open Collimator Frenzy-S 1x19x28 – MGT – Picatinny – Black – SCRD-66
An open collimator with a custom curved lens and a 3 MOA size red dot from Vector Optics. The custom lens made it possible to achieve sight dimensions of 19×28 mm, which will make it easier to operate in both dynamic and static situations. The collimator owes its strength to its manufacture from 7075 T6 aluminum alloy.
Features:
- Open collimator with custom curved lens and Picatinny mount
- Compatible with the MGT standard
- Compact dimensions
- Low profile design despite mounting
- Red aiming point size of 3 MOA
- Powered by a single CR1632 battery, lasts up to 50,000 hrs
- Constructed of 7075 T6 aluminum
- Meets IPX7 waterproofing class standards
- Motion sensor to save batteries
-
Vector Optics – LPVO Scope Tauron 1-6×24 SFP – VTA-9 MIL – Black – SCFF-63
€ 319,00 Add to cartVector Optics – LPVO Scope Tauron 1-6×24 SFP – VTA-9 MIL – Black – SCFF-63
Tauron LPVO scope with variable magnification from 1 to 6x from Vector Optics. It features a 24mm multi-coated objective lens. It uses a VTA-9 MIL glass-etched target reticle with an illuminated aiming point with 6 levels of brightness. The illuminated aiming point is powered by a single CR2032 battery. The scope is made of 6061-T6 aircraft aluminum alloy.
Features:
- Tauron LVPO scope with a 24mm objective lens
- Features variable magnification from 1 to 6x
- VTA-9 MIL front sighting reticle on the FFP foreground
- Illuminated aiming point in red color
- Aiming point with 6 degrees of brightness
- Powering the illumination with a CR2032 battery
- Body made of 6061 T6 aircraft aluminum
- Shock resistance up to 1000 G
- Meets the requirements of waterproof class IP67
- Wide field of view at a distance of 100m, even at 6x zoom
- Diopter adjustment from -3 to +2
- Horizontal and vertical aiming crosshair adjustment 60 MIL
- Adjustment by 1/10 MRAD per click
- Output pupil offset at a distance of 100 mm
-
Holosun – HS510C Open Reflex Sight & HM3X Magnifier Set
Original price was: € 665,00.€ 585,00Current price is: € 585,00. Add to cartHolosun – HS510C Open Reflex Sight & HM3X Magnifier Set
A set of Open Reflex HS510C Multi Reticle red dot sigth with HM3X magnifier with x3 zoom.
The set is equipped with a Picatinny-compatible QD mount that makes attaching the red dot sight and magnifier easy and very fast.
The user can choose from three aiming points in the red dot sight – a 2 MOA dot, a 65 MOA circle and a combination of these. The red dot sight is equipped with a solar panel to reduce battery consumption. In addition, the solar panel has a function to automatically adjust the brightness of the aiming point.
The magnifier with 3x zoom has dioptric adjustment. The QD mount, on which the magnifier is placed, has a Flip-Up hinge, which allows you to fold or unfold the device very quickly.
Features of the HS510C sight:
- Field of view wider than with closed sights
- Advanced LED technology that features low power consumption, thus providing up to 50,000 hours of operation on a single battery
- Multiple Reticle System – a choice of three target points
- System based on a single diode, does not affect zeroing
- Operates in automatic (default) or manual mode
- Built-in solar cell allows operation even when battery is low
- Light sensor function to adjust the spot intensity according to the light
- Durable lens with advanced multi-layer coatings
- No parallax
- Motion sensor to wake up the device from sleep mode
- Function of remembering the last used target mark and its intensity
- Low battery indication (target mark starts blinking slowly)
- Lightweight and durable housing made of 6061 aluminum and titanium
- Quick release QD buckle
- Waterproof to IP67 standard
Features of HM3X Magnifier:
- Durable anodized aluminum housing
- Meets IP67 water and dust resistance standard
- Provides 3x image magnification
- Highly transparent lenses
- Dioptric adjustment
- QD mount with Flip-Up hinge
Included:
- HS510C Reflex Sight
- Magnifier HM3X
- Riser for sight
- Riser for magnifier
- Spare battery tray for sight (with screws)
- Torx key
- Adjustment key
- Microfiber cloth
- Transport case
Holosun Limited Lifetime Warranty
-
Holosun – HS507C X2 Micro Red Dot – Solar Panel
€ 390,00 Select options This product has multiple variants. The options may be chosen on the product pageHolosun – HS507C X2 Micro Red Dot – Solar Panel
The HS507C is an open reflex optical sight designed for pistol applications. Features include Holosun’s Super LED with up to 50k hours battery life, Multi-Reticle System, Solar Failsafe, and Shake Awake.
In the set:
– sight
– battery
– torx key
– adjusting key
– microfiber cloth -
Holosun – 507 Competition-RD Red Dot Sight – RMR Mount – HS507COMP
Original price was: € 537,00.€ 480,00Current price is: € 480,00. Add to cartHolosun – 507 Competition-RD Red Dot Sight – RMR Mount – HS507COMP
The 507Comp-RD is a compact red dot sight featuring a compact and low-profile design, a target reticle Competition Reticle System (CRS) with 8 characters and 10 levels of illumination, battery power, and a rugged aluminum housing. Fitted for mounting on Trijicon RMR type boards.
- 1x 507Comp-RD red dot sight
- 1x lens cleaning cloth
- 1x Torx T10 wrench
- 1x set of long mounting screws
- 1x set of short mounting screws
- 1x CR-1632 battery
- User manual
- Warranty brochure
-
Vector Optics – One Piece Scope Mount
Original price was: € 65,00.€ 39,00Current price is: € 39,00. Add to cartX-ACCU Scope Mount
The X-ACCU scope mount is a one-piece 20 MOA canted mount.
Base height: 20 mm, compatible with Picatinny rail and 30 mm tube riflescopes.
Length: 154 mm Distance between scope rings: 70 mm Scope center height: 35 mm
-
Vortex Optics – Crossfire II 1-4×24
€ 219,00 Add to cartTECHNICAL DATA
Overall length 248 mm
Objective diameter 24 mm
Tube diameter 30 mm
Zoom 1-4 x Parallax adjustment 91.4 m
Linear field of view at 100 m 32-8 m
Maximum vertical (height) adjustment 100 MOA
Maximum horizontal (supply) adjustment 100 MOA
Full revolution offset 30 MOA
Stepwise adjustment 1/2 MOA
Eye distance 100 mm
Crosshair type V-Brite MOA Turret type Covered Crosshair illumination
Weight 454 g
Color Black
