Shooting sports
Shooting sports
-
Earmor – Active Hearing Protectors M23T – NRR 25 dB – Bluetooth 6.0 – Foliage Green – M23T-AI-FG
€ 118,00 Add to cartEarmor – Active Hearing Protectors M23T – NRR 25 dB – Bluetooth 6.0 – Foliage Green – M23T-AI-FG
EARMOR® M23T AI combines advanced hearing protection, 360° situational awareness, Bluetooth® 6.0 connectivity, and AI-powered features in an ultra-lightweight true wireless design. Designed for shooting, hunting, tactical operations, and everyday use, it keeps you protected, aware, and connected wherever you go.
Earmor M23T AI active in-ear hearing protectors in an earbud form factor. The earbuds utilize a Bluetooth 6.0 connection, allowing you to listen to music and manage phone calls. M23T AI earbuds feature a 25 dB Noise Reduction Rating (NRR) and a 31 dB Signal-to-Noise Ratio (SNR). This is made possible by various ear tip sizes that ensure a tight fit within the ear canal.
The device features two operating modes – with and without Bluetooth. The first mode enables audio playback and phone calls, while the second mode transmits ambient sounds across three different scenarios.
Modes:
- Ambient mode, 3 settings: Low, Medium, High. Maximum amplification of quiet ambient sounds, improving situational awareness to keep you aware of your surroundings;
- Silent mode: Ambient sound amplification turned off, only noise reduction active; ideal for focused work or meditation.
Effectively reducing noise over 82 dB with a 1-millisecond response time, these hearing protectors are ideal for high-noise environments such as shooting ranges, construction sites, or manufacturing facilities.
The earbuds, along with the charging case, provide a total of up to 24 hours of operating time. The case features an LED charging indicator that can be activated with a dedicated button. The earbuds charge inside the case, and the case itself is charged via a USB-C port sealed with a rubber plug. The hearing protectors provide an alert when the battery is low. AI features are available through the dedicated EARMOR app.
A standout feature of the M23T AI is its advanced control system, based on a textured rubber button on each earbud. Double-clicking either button allows you to pause and play audio, or answer and end calls; holding for 2 seconds rejects a call. A triple-click on the left earbud skips back one track, and on the right, skips forward.
Features:
- Advanced M23T AI active in-ear hearing protectors
- Extensive AI features via the dedicated EARMOR app
- Electronic earplugs
- Compact carrying case – fits most pockets (Cargo Pouch)
- Three noise reduction modes
- Bluetooth 6.0 connectivity for audio playback and calls
- Reduces noise over 82 dB within 1 ms
- Noise Reduction Rating (NRR) of 25 dB
- Control button on each earbud
- Audio signals confirm activated functions
- Complies with IPX5 waterproof standards
- Up to 24 hours of battery life with case charging
- Earbud charging case with USB-C port and cable
- Includes replaceable ear tips in three sizes
Set contents:
- M23T AI earbuds
- Charging case
- USB/USB-C cable
- adhesive foam microphone covers to reduce wind noise
- Replaceable ear tips:
- Includes two types of interchangeable eartips in various sizes (S, M, L):
- classic foam tips that need to be rolled up beforehand;
- pre-molded triple-flange silicone ear tips that require no rolling.
https://youtu.be/9dFr7qe6pRM
https://youtu.be/F2ea2HkmXkY
-
Earmor – Active Hearing Protectors M23T – NRR 25 dB – Bluetooth 6.0 – Yellow – M23T-AI-YE
€ 118,00 Add to cartEarmor – Active Hearing Protectors M23T – NRR 25 dB – Bluetooth 6.0 – Yellow – M23T-AI-YE
Earmor M23T AI active in-ear hearing protectors in an earbud form factor. The earbuds utilize a Bluetooth 6.0 connection, allowing you to listen to music and manage phone calls. M23T AI earbuds feature a 25 dB Noise Reduction Rating (NRR) and a 31 dB Signal-to-Noise Ratio (SNR). This is made possible by various ear tip sizes that ensure a tight fit within the ear canal.
The device features two operating modes – with and without Bluetooth. The first mode enables audio playback and phone calls, while the second mode transmits ambient sounds in three different scenarios. They effectively reduce noise over 82 dB with a response time of 1 millisecond. These hearing protectors are ideal for noisy environments such as shooting ranges, construction sites, or manufacturing facilities.
The earbuds, along with the charging case, provide a total of up to 24 hours of operating time. The case features an LED charging indicator that can be activated with a dedicated button. The earbuds charge inside the case, and the case itself is charged via a USB-C port sealed with a rubber plug. The hearing protectors provide an alert when the battery is low. AI features are available through the dedicated EARMOR app.
A standout feature of the M23T AI is its advanced control system, based on a textured rubber button on each earbud. Double-clicking either button allows you to pause and play audio, or answer and end calls; holding for 2 seconds rejects a call. A triple-click on the left earbud skips back one track, and on the right, skips forward.
Features:
- Advanced M23T AI active in-ear hearing protectors
- Extensive AI features via the dedicated EARMOR app
- Electronic earplugs
- Compact carrying case – fits most pockets (Cargo Pouch)
- Three noise reduction modes
- Bluetooth 6.0 connectivity for audio playback and calls
- Reduces noise over 82 dB within 1 ms
- Noise Reduction Rating (NRR) of 25 dB
- Control button on each earbud
- Audio signals confirm activated functions
- Complies with IPX5 waterproof standards
- Up to 24 hours of battery life with case charging
- Earbud charging case with USB-C port and cable
- Includes replaceable ear tips in three sizes
Set contents:
- M23T AI earbuds
- Charging case
- Replaceable ear tips
https://youtu.be/9dFr7qe6pRM
https://youtu.be/F2ea2HkmXkY
-
Earmor – M23T Active In-Ear Hearing Protectors – NRR 25 dB – Bluetooth 6.0 – Black – M23T-AI-BK
€ 118,00 Add to cartEarmor – M23T Active In-Ear Hearing Protectors – NRR 25 dB – Bluetooth 6.0 – Black – M23T-AI-BK
EARMOR® M23T AI combines advanced hearing protection, 360° situational awareness, Bluetooth® 6.0 connectivity, and AI-powered features in an ultra-lightweight true wireless design. Designed for shooting, hunting, tactical operations, and everyday use, it keeps you protected, aware, and connected wherever you go.
Earmor M23T AI active in-ear hearing protectors in an earbud form factor. The earbuds utilize a Bluetooth 6.0 connection, allowing you to listen to music and manage phone calls. M23T AI earbuds feature a 25 dB Noise Reduction Rating (NRR) and a 31 dB Signal-to-Noise Ratio (SNR). This is made possible by various ear tip sizes that ensure a tight fit within the ear canal.
The device features two operating modes – with and without Bluetooth. The first mode enables audio playback and phone calls, while the second mode transmits ambient sounds across three different scenarios.
Modes:
- Ambient mode, 3 settings: Low, Medium, High. Maximum amplification of quiet ambient sounds, improving situational awareness to keep you aware of your surroundings;
- Silent mode: Ambient sound amplification turned off, only noise reduction active; ideal for focused work or meditation.
Effectively reducing noise over 82 dB with a 1-millisecond response time, these hearing protectors are ideal for high-noise environments such as shooting ranges, construction sites, or manufacturing facilities.
The earbuds, along with the charging case, provide a total of up to 24 hours of operating time. The case features an LED charging indicator that can be activated with a dedicated button. The earbuds charge inside the case, and the case itself is charged via a USB-C port sealed with a rubber plug. The hearing protectors provide an alert when the battery is low. AI features are available through the dedicated EARMOR app.
A standout feature of the M23T AI is its advanced control system, based on a textured rubber button on each earbud. Double-clicking either button allows you to pause and play audio, or answer and end calls; holding for 2 seconds rejects a call. A triple-click on the left earbud skips back one track, and on the right, skips forward.
Features:
- Advanced M23T AI active in-ear hearing protectors
- Extensive AI features via the dedicated EARMOR app
- Electronic earplugs
- Compact carrying case – fits most pockets (Cargo Pouch)
- Three noise reduction modes
- Bluetooth 6.0 connectivity for audio playback and calls
- Reduces noise over 82 dB within 1 ms
- Noise Reduction Rating (NRR) of 25 dB
- Control button on each earbud
- Audio signals confirm activated functions
- Complies with IPX5 waterproof standards
- Up to 24 hours of battery life with case charging
- Earbud charging case with USB-C port and cable
- Includes replaceable ear tips in three sizes
Set contents:
- M23T AI earbuds
- Charging case
- Kaabel USB/USB-C
- adhesive foam microphone covers to reduce wind noise
- Replaceable ear tips:
- Includes two types of interchangeable eartips in various sizes (S, M, L):
- classic foam tips that need to be rolled up beforehand;
- pre-molded triple-flange silicone ear tips that require no rolling.
https://youtu.be/9dFr7qe6pRM
https://youtu.be/F2ea2HkmXkY
-
NORD ARMS high scope mount 30mm, picatinny, 48mm height
Original price was: € 70,00.€ 39,99Current price is: € 39,99. Add to cartNord Arms high scope mount 30mm, picatinny, 48mm height
One-piece scope mount for 30 mm tubes, designed primarily for the AR platform. Its cantilever design allows for increased eye relief. The mount is made from CNC-machined high-strength aluminum, ensuring high rigidity – a critical feature for withstanding recoil loads.
Heavy-duty scope base for 30 mm rifle scopes.
Features:
- Tube diameter: 30 mm
- Mounting base length: 82 mm
- Optical centerline height: 48 mm / 1.88″
- Mounting: Picatinny
- Ring spacing: 70 mm
- Offset: 50 mm
- Clamping distance: 50 mm
- Mounting bolts: Torx T15
- Screw torque: 2–2.4 Nm
- Dimensions: 140 × 72 × 45 mm
- Material: 6061‑T6 aluminum
- Weight: 215 g
- Color: Black
- Recommended scope ring torque 2.9 Nm
- Recommended rail bolt torque 7 Nm
-
Shooters Global – Shot Analyzer SG Timer GO – USB-C – Bluetooth
€ 176,00 Add to cartShooters Global – Shot Analyzer SG Timer GO – USB-C – Bluetooth
Accurate and compact shot analyzer for timing firearms, airsoft guns, or even dry fire practice. Simple and intuitive to use, made of durable materials. Includes a USB-A to USB-C cable and a belt clip holder. The timer package includes QR codes for downloading a dedicated app to enhance the device’s overall functionality.
The device allows you to adjust operating parameters, such as timer sounds and sensor sensitivity. Additionally, it has a set of custom presets tailored to specific weapon types. The timer records the sounds of the trigger pull. The internal memory can record up to a million repetitions and can also be paired with another device. The device features a 1.9-inch screen in the center and is controlled by two buttons.
Set components:
- SG Timer GO shooting timer
- Belt clip holder
- USB-A – USB-C cable
- Dedicated lanyard
- User manual
-
M-Tac – Gun Case – 128 cm – Black – MTC-PB1158-BK
€ 74,90 Add to cartM-Tac – Gun Case – 128 cm – Black – MTC-PB1158-BK
M-Tac universal gun case for long firearms, made of 100% polyester. Allows for the safe transport of rifles, shotguns, carbines, etc., up to 128 cm in length. It features a padded, soft, and shock-absorbing interior to protect the contents, with stability ensured by internal hook-and-loop straps to secure the firearm or equipment.
The M-Tac gun case opens with a zipper and is equipped with four practical and spacious pockets: one external and three internal. It holds everything you need for the range or the hunt, such as ammunition or a first aid kit.
Features:
- Universal gun case for transporting long hunting rifles, carbines, air rifles, etc.
- Made of durable polyester
- Interior lined with a soft insert to protect contents
- Allows safe transport of firearms up to 128 cm long
- 3 internal pockets
- 1 external pocket
- Internal hook-and-loop straps allow for securing and stabilizing the firearm
- Zipper closure
- Comfortable carrying handle
Features: Material 100% polyester Dimensions 128 x 25 x 10 cm Color Black Weight 1,450 g -
Outer 50 mm rigid belt for holster and mag pouches – Black
€ 23,00 Add to cartOuter 50 mm rigid belt for holster and mag pouches – Black
The base material of the outer belt is reinforced with an integrated 1 mm plastic insert. The inner side features a double-sided hook-and-loop fastener for length adjustment.
The belt is adjustable and secures with a three-point quick-release buckle.
The belt’srigid construction provides stability for carrying pistol holsters, ammo pouches, medical kits, etc. The loop lining (velcro) allows the belt to be combined with an inner belt. When used with an inner belt, the outer belt remains stable without the need for belt loops. The inner belt is threaded through the trouser loops. This setup allows for quick removal or attachment of the outer belt and gear, while the inner belt’s velcro lining keeps the outer belt securely in place.
This belt is highly rated as a duty belt among police, security personnel, law enforcement, and sport shooters.
Features:
– 50 mm wide tactical rigid belt
– Secured with an original three-point quick-release polymer buckle.
– Lined with hook-and-loop (velcro)Technical data:
- Size L-XL (up to 150 cm)
- Color: Black
-
ESP – MOLLE Plastic Magazine Holder for AK Magazines – UBC-02 Quick Mount – Black – MH-14-AK BK
€ 29,90 Add to cartESP – MOLLE Plastic Magazine Holder for AK Magazines – UBC-02 Quick Mount – Black – MH-14-AK BK
Durable and adjustable plastic magazine holder for a single 7.62 × 39 mm AK-47 rifle or similar magazine. Comfortable with numerous adjustment options, making it excellent for practical shooting competitions.
The sophisticated design with a tension spring allows for rapid magazine extraction during combat reloads. Each user can set their preferred retention force using the 3 different spacers included with the holder.
Equipped with the UBC-02 quick-locking and adjustable belt clip, the holder can be attached to a standard competition belt (fits widths from 35 to 50 mm) as well as MIL-STD MOLLE webbing. The quick-locking clip allows for rapid one-handed attachment without removing the belt. The holder rotates 360 degrees with 16 locking positions and is fully MOLLE compatible.
Color: black
Weight: 205 ghttps://youtube.com/shorts/gnb19YIorKI?feature=share
https://youtu.be/AMtJMuM8X8Y
-
ESP – magazine pouch for M16, M4 magazines – Plastic – UBC-01 belt clip attachment – black – MH-04-AR15 BK
€ 20,50 Add to cartESP – magazine pouch for M16, M4 magazines – Plastic – UBC-01 belt clip attachment – black – MH-04-AR15 BK
The ESP magazine pouch is designed to hold standard AR15, M4, and M16 magazines. It is made of durable polymer, resistant to mechanical damage and weather conditions. The product is widely compatible, including magazines such as SA80, Famas, and Sig 556.
Internal rubber stoppers stabilize the magazine in the pouch, preventing movement during transport. The UBC-01 mounting system allows the pouch to be quickly attached to a belt with one hand without having to undo or remove other equipment.
The inside of the buckle features adjustable stoppers, allowing the holder to be securely attached to belts up to 50 mm wide. The rotating mechanism allows for smooth adjustment of the pouch angle within a 360-degree range, locking into one of 16 pre-set positions.
Equipment security is ensured by a three-stage locking system and an adjustment screw. The low-profile design and weight mean the pouch does not add excessive bulk and allows for optimal placement of spare ammunition on a tactical belt.
Features:
- Polymer magazine pouch with a three-stage locking system and tension adjustment
- UBC-01 QuickMod attachment with one hand, without undoing the belt
- Internal rubber stoppers prevent movement
- Compatible with metal and plastic magazines
- 360° rotation with smooth angle adjustment and 16 locking positions
Features: Compatibility AR15
M16
M4
SA80
Famas
Sig 556
AR70/90
Daewoo K2
AUG A3
TAR21Mount UBC-01 Rotation range 360 degrees Material Polymer Weight 193 g Color Black https://youtu.be/AMtJMuM8X8Y
-
Bolle Safety – polyester eyewear case – large – black – PACCASR-4
€ 8,50 Add to cartBolle Safety – polyester eyewear case – large – black – PACCASR-4
Semi-rigid eyewear case. Developed for most popular models. The outer layer is made of durable fiber-structured polymer, providing enhanced durability while maintaining flexibility.
The interior is lined with soft fabric to protect glasses from scratches. The case features a zipper closure. It offers effective protection against crushing and scratching during transport. Its flat shape makes it easy to fit into pant or jacket pockets.
Features:
- Semi-rigid eyewear case
- Fits most popular models
- Made of durable fiber-structured polyester
- Lined with soft fabric
- Zipper closure
- Protects glasses from crushing and scratches during transport
- Fits easily into clothing and backpack pockets
Features: Material Polyester External dimensions 190 × 90 × 60 mm Internal dimensions 180 × 80 × 55 mm Weight 61 g Color Black -
Earmor – mürasummutavad M20 kõrvaklapi otsikud – S30 – L
€ 16,90 Add to cartEarmor – M20 Noise-Canceling Eartips – S30 – L
Earmor S30 are replacement eartips for Earmor M20 series earplugs. Package includes 8 eartips.
Available in three sizes: S, M, and L.
Features:
- Compatible with: Earmor M20, M20T, and M20T earbuds.
- Package includes 8 eartips.
- Three sizes available: S, M, and L for a perfect fit.
- Contains sound-absorbing materials that improve noise reduction quality.
- Slow recovery foam ensures stable comfort and durability.
-
Earmor – M20 Noise-Canceling Earplug Tips – S30 – M
€ 16,90 Add to cartEarmor – M20 Noise-Canceling Earplug Tips – S30 – M
Earmor S30 are replacement eartips for Earmor M20 series earbuds. The package contains 8 eartips.
Available in three sizes: S, M, and L.
Features:
- Compatible with: Earmor M20, M20T, and M20T earbuds.
- Package includes 8 eartips.
- Three sizes available: S, M, and L for a perfect fit.
- Contains sound-absorbing materials that improve noise reduction quality.
- Slow recovery foam ensures stable comfort and durability.
-
Earmor – Noise Reduction M20 Eartips – S30 – S
€ 16,90 Add to cartEarmor – Noise Reduction M20 Eartips – S30 – S
Earmor S30 are replacement eartips for Earmor M20 series earbuds. The package contains 8 eartips.
Available in three sizes: S, M, and L.
Features:
- Compatible with: Earmor M20, M20T, and M20T earbuds.
- Package includes 8 eartips.
- Three sizes available: S, M, and L for a perfect fit.
- Contains sound-absorbing materials that improve noise reduction quality.
- Slow recovery foam ensures stable comfort and durability.
-
Helikon – Competition Double Carbine Insert® – Grey
€ 10,90 Add to cartHelikon – Competition Double Carbine Insert® – Grey
COMPETITION Double Rifle Insert® is an accessory pouch panel that connects to the dedicated pocket of the COMPETITION MultiGun Rig. The insert fits two standard-size carbine/rifle magazines, including AR or AK47 magazines.
The magazine pouches are partially stiffened to assist with re-indexing or holstering magazines. An elastic cord running through the center of the pouches prevents magazines from falling out even during rapid movements.
Features:
- Made of 500D Cordura®
- Designed to work with the COMPETITION MultiGun Rig
- Designed to hold two AR/AK carbine magazines
Technical data: Manufacturer code IN-C2R-CD-35 Material Cordura® 500D Dimensions 170 x 130 x 15 mm Weight 86 g Color Grey -
FAB DEFENSE – UNIVERSAL POLYMER MAGAZINE COUPLER TZ-2
€ 14,50 Add to cartFAB Defense – Universal Polymer Magazine Coupler TZ-2
The TZ-2 is a durable and lightweight polymer magazine coupler designed for secure magazine handling and rapid mag changes. Includes 2 clamps for coupling magazines.
Benefits:
– Allows for rapid magazine changes
– Durable and lightweight fiberglass-reinforced polymer construction
– Quick and easy installation
– Improves operational efficiency and performanceCompatibility:
– M16/M4/AR15
– AK-47, Galil
– H&K 33, 53, 91
– Ruger Mini M14
– Sig 542, 543Dimensions:
Weight: 73 g
Width: 25 mm
Height: 76 mm
Length: 61 mm
Color: Black -
ESP – MOLLE Plastic Magazine Holder for M16, M4 – UBC-02 Quick-Release – Black – MH-14-AR15 BK
€ 26,90 Add to cartESP – MOLLE Plastic Magazine Holder for M16, M4 – UBC-02 Mount – Black – MH-14-AR15 BK
Durable and adjustable plastic magazine holder for a single AR15 / M16 / M4 rifle 5.56 NATO standard magazine. Comfortable with numerous adjustment options, excellent for practical shooting competitions.
Self-locking universal magazine holder designed for carrying most metal or plastic (Magpul, Oberland Arms, etc.) magazines. Sophisticated design with a tension spring allows for rapid magazine extraction during combat reloads. Each user can set their preferred draw tension using the 3 different spacers included with the holder.
Equipped with the quick-locking and adjustable UBC-02 belt clip, the holder can be attached to a standard competition belt (fits widths from 35 to 50 mm) as well as MIL-STD MOLLE webbing. The quick-locking belt clip allows for fast attachment to the belt with one hand and without unbuckling. The holder rotates 360 degrees with 16 locking positions. It can also be attached to MIL-STD MOLLE straps.
Features:
- Can also be attached to MIL-STD MOLLE belts
- Quick-locking belt clip
- Adjustable belt width (35 to 50 mm)
- 360-degree adjustable angle (16 positions)
- Adjustable draw tension, 3 different levels
- Color: Black
- Weight: 193 g
- Fits magazines: NATO AR15; M4; British SA80; French Famas; Swiss Sig 556; Italian Beretta AR70/90; South Korean Daewoo K2; Austrian new AUG/A3; Israeli TAR21+
https://youtube.com/shorts/gnb19YIorKI?feature=share
https://youtu.be/AMtJMuM8X8Y
-
KECOTEH HOLSTER ADAPTER + BELT AND HOLSTER QLS 19/22 QUICK LOCKING SYSTEM KIT – BLACK – LOW RIDE
€ 31,00 Add to cartKECOTEH holster adapter + belt and holster QLS 19/22 quick locking system kit – black – low ride
The KECOTEH holster adapter is made from durable plastic.
The design allows the holster to be mounted 10 cm lower, providing a more accessible draw height.
Features
- Includes quick-release attachment for tactical belts
- Adapter plate
- Holster QLS quick locking system kit
- Made from lightweight and durable PETG CF plastic
- Compatible with any “3-hole” pattern holster
- Allows for 15-degree holster angle adjustment
Features: Length 202 mm Width 57 mm Hole diameter 6.5 mm Material PETG CF plastic Weight 200 g Color Black https://youtube.com/shorts/2_whJ5KmA3w
-
GHOST HYBRID SPORT HOLSTER – SHADOW2-SP-01 SHADOW-RIGHT
€ 48,90 Add to cartGHOST HYBRID SPORT HOLSTER – SHADOW2-SP-01 SHADOW-Right-handed
The Ghost Hybrid Sport holster is ideal for IPSC and general target practice, featuring a low-profile belt attachment that holds the firearm away from the body for a better draw.
The Hybrid mounting system provides a secure, fixed position.- Ideal for standard sport shooting
- Ensures fast and safe weapon draw
- Hybrid belt attachment is ideal for sport shooting due to its low position and offset from the body
- Hybrid mounting system features a fixed position, ensuring a tight fit on the belt
- Suitable for all types of shooters
- Right-handed
- Available for other firearm models upon request
-
HELIKON – COMPETITION INNER BELT – BLACK – PS-CI4-NL-01
€ 27,90 Add to cartHelikon – Competition Inner Belt – Black – PS-CI4-NL-01 L/XL Size (Up to 128 cm)
Stiffened inner belt lined with hook-and-loop, designed to stabilize our Range line belts while ensuring compliance with IPSC regulations.
Overlapping hook-and-loop closure eliminates buckle pressure when adding an outer belt, with the lining reducing the risk of clothing damage during use.
Features:
– 40 mm wide
– Overlapping closure, buckle-free
– Stiffened and hook-and-loop linedSKU: PS-CI4-NL
Weight: 120 g
Dimensions: S/M: Up to 106 cm; L/XL: Up to 128 cm
Material: 100% nylon
EUROPEAN PATENT No. 003846476-0004 -
HELIKON – COMPETITION NAUTIC BELT – BLACK – PS-CNS-NL-01
€ 69,90 Add to cartHelikon – Competition Nautic Belt – Black – PS-CNS-NL-01 – Size L
The Competition Nautic Shooting Belt is one of our core 45 mm wide belts.
The stiffened construction ensures stable carry for pistol holsters, ammo pouches, and medical kits. The loop lining (Velcro) allows the belt to be combined with the Helikon – Competition Inner Belt, ensuring maximum stability during use.
The belt fastens with an original Cobra® Nautic buckle. The buckle is not only salt- and dust-resistant but also significantly flatter than other Cobra® buckles, making it much more comfortable even during prolonged use.
Additionally, the Nautic belt is an ideal choice for any modular belt setup.
Features:
– 45 mm wide nylon webbing
– Fastened with an original AustriAlpin Cobra® Nautic buckle, ensuring rust and salt resistance
– Lined with Velcro® loopTechnical data:
- Weight: 307g
- Size L (98-108 cm)
- Material: Nylon
- Color: Black
-
METAL HOLSTER ADAPTER LOW + QLS 19/22 QUICK LOCKING SYSTEM BLACK
€ 49,90 Add to cartMETAL HOLSTER ADAPTER LOW + QLS 19/22 KIT – BLACK
- Includes two belt mounting bars for secure attachment to tactical belts
- Constructed from lightweight and durable aluminum alloy, ensuring long-lasting performance
- Compatible with any “3-hole” pattern holster
- Features 20-degree holster cant adjustment for a customized draw
- MHA leg strap kit included
Features:
-
DLG TACTICAL – PISTOL SAFETY FLAG – POLYMER – RED – DLG-101
€ 2,50 Add to cartDLG TACTICAL – PISTOL SAFETY FLAG – POLYMER – RED – DLG-101
Polymer safety flag from DLG Tactical for securing the chamber. In addition to preventing cartridge insertion into the pistol barrel, it provides a clear visual indicator with a distinctive wing. The element features a corner hole for threading a key ring or attaching a tag. Using the flag improves safety levels and clearly communicates that the weapon is clear.
Features:
- Safety flag designed to secure the pistol chamber
- Made of bright polymer
- Hole for attaching a key ring or key fob
- Lightweight design
- Clearly indicates that the pistol is unloaded
- Ideal for transporting weapons
Technical Rod diameter 5 mm Dimensions 45 x 42 x 8 mm Material Polymer Weight 4.2 g Color Red -
DLG TACTICAL – RIFLE SAFETY FLAG – POLYMER – RED – DLG-103
€ 2,50 Add to cartDLG TACTICAL – RIFLE SAFETY FLAG – POLYMER – RED – DLG-103
A polymer chamber safety flag from DLG Tactical. In addition to preventing cartridge insertion, it provides a high-visibility indicator with its distinctive wing, while the integrated corner hole allows for key ring or fob attachment, helping the shooter improve safety levels by clearly communicating that the firearm is unloaded.
Features:
- Safety flag for securing the chamber
- Made of bright polymer
- Hole for attaching a key ring or key fob
- Lightweight design
- Clearly indicates that the firearm is unloaded
- Ideal for transporting firearms
Features: Rod diameter 5 mm Dimensions 155 x 42 x 8 mm Material Polymer Weight 6.5 g Color Red -
DLG TACTICAL – RIFLE SAFETY FLAG – POLYMER – RED – DLG-102
€ 2,50 Add to cartDLG TACTICAL – RIFLE SAFETY FLAG – POLYMER – RED – DLG-102 5 MM
Polymer chamber safety flag from DLG Tactical, designed to prevent cartridge insertion while visually marking the rifle with a distinctive wing. The unit features a corner hole for key rings or tags, allowing for easy identification. Using this safety flag enhances range safety by clearly communicating that the weapon is clear and secured.
Features:
- Safety flag for securing the rifle chamber
- Made of bright polymer
- Hole for attaching a key ring or key fob
- Lightweight design
- Clearly indicates that the weapon is clear
- Ideal for transporting weapons
Features: Diameter 5 mm Dimensions 76 x 42 x 8 mm Material Polymer Weight 5.3 g Color Red -
DLG Tactical – Shotgun Safety Flag – Polymer – Red – DLG-071
€ 2,50 Add to cartDLG Tactical – Shotgun Safety Flag – Polymer – Red – DLG-071
Polymer flag from DLG Tactical for securing the chamber. In addition to protecting the shotgun barrel from cartridge insertion, it visually marks it with a distinctive wing. The element also features a hole in the corner for a key ring or tag. Using the shotgun safety flag improves user safety and clearly communicates that the weapon is unloaded.
Features:
- Safety flag for securing the chamber of 12/20/36 GA shotguns
- Made of bright polymer
- Hole for attaching a key ring or key fob
- Low weight
- Clearly indicates that the shotgun is unloaded
- Ideal for transporting weapons
Features: Compatible caliber 12 GA
20 GA
36 GADimensions 91 × 55 × 22 mm Material Polymer Weight 8 g Color Red -
Bolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Copper – RUSPMN31E
€ 10,90 Add to cartBolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Copper – RUSPMN31E
Bolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Copper – RUSPMN31E
RUSH+ safety glasses version 2.0 with a brown lens and integrated nose piece.
The lens complies with the EN ISO 16321-1 GL1 CT 1 KN standard. This means it features a solar glare filter, does not alter the perception of surrounding colors, withstands impacts from 6 mm diameter fragments weighing up to 0.86 g at speeds up to 45 m/s, and maintains its properties when exposed to particles at temperatures from -5 to +55 °C.
The rimless design allows the glasses to be worn close to the eyebrows without reducing the field of vision. Additionally, the close fit provides better eye protection against debris, dust, or other contaminants. The simple design and construction, made of polycarbonate and TPR polymer, increase resistance to mechanical damage.
The lens features a Platinum coating that minimizes fogging and potential scratches. The copper-colored lens has a light transmission of 64%. Thanks to the low-profile design and streamlined shape, the safety glasses fit well with additional protective equipment, such as active hearing protection or safety helmets.
-
Bolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Smoke – RUSPMN20E
€ 10,90 Add to cartBolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Smoke – RUSPMN20E
RUSH+ version 2.0 safety glasses with a smoke lens and integrated nose piece. The rimless design allows the glasses to be worn close to the eyebrows without reducing the field of vision. Additionally, the close-to-head fit provides better eye protection against debris, dust, or other contaminants. The simple design and construction made of polycarbonate and TPR polymer increase resistance to mechanical damage.
The lens is finished with a Platinum coating, which minimizes fogging and potential scratches. The smoke lens has a light transmission coefficient of 13%. Thanks to the low-profile design and streamlined shape, these safety glasses pair well with additional protective equipment, such as active hearing protection or safety helmets.
The lens complies with the EN ISO 16321-1 GL3 CT 1 KN standard. This means it features a solar glare filter, does not distort color perception, withstands impacts from 6 mm diameter fragments weighing up to 0.86 g at speeds up to 45 m/s, and maintains its properties when exposed to particles at temperatures from -5 to +55 °C.
Features:
-
- RUSH+ 2.0 safety glasses with smoke lens
- VLT coefficient 13%
- Rimless 2.2 mm polycarbonate visor with Platinum coating
- Simple three-piece design
- Lanyard holes in temples
- Integrated nose piece
- Lightweight at 35 g
- Complies with EN ISO 16321-1 requirements
-
-
Bolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Clear – RUSPMN10E
€ 10,90 Add to cartBolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Clear – RUSPMN10E
RUSH+ version 2.0 safety glasses with a clear visor and integrated nose piece. The rimless design allows the glasses to be worn close to the eyebrows without reducing the field of vision. Additionally, the wrap-around fit provides better protection against debris, dust, or other contaminants. The simple design and construction made of polycarbonate and TPR polymer increase resistance to mechanical damage.
The visor is finished with a Platinum coating, which minimizes fogging and potential scratches. The clear visor has a light transmission of 92%. Thanks to the low-profile design and streamlined shape, these safety glasses pair well with additional protective equipment, such as active hearing protection or helmets.
The visor complies with the EN ISO 16321-1 UL1.2 CT 1 KN standard. This means it features a UV filter, does not distort color perception, withstands impacts from 6 mm shrapnel weighing up to 0.86 g at speeds up to 45 m/s, and maintains its properties in contact with particles at temperatures from -5 to +55 °C.
Features:
- RUSH+ 2.0 safety glasses with clear visor
- VLT coefficient 92%
- Rimless 2.2 mm polycarbonate visor with Platinum coating
- Simple three-piece design
- Lanyard holes in temples
- Integrated nose piece
- Lightweight at 35 g
- Complies with EN ISO 16321-1 requirements
-
Bolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Brown – RUSPMN50E
€ 10,90 Add to cartBolle Safety – RUSH+ 2.0 Safety Glasses – Platinum – Brown – RUSPMN50E
RUSH+ version 2.0 safety glasses with a brown lens and integrated nose piece. The rimless design allows the glasses to be worn close to the eyebrows without reducing the field of vision.
The glasses comply with the EN ISO 16321-1 GL2 CT 1 KN standard. This means they feature a solar glare filter, do not distort color perception, withstand impacts from 6 mm diameter shrapnel weighing up to 0.86 g at speeds up to 45 m/s, and maintain their properties when exposed to particles at temperatures from -5 to +55 °C.
Additionally, the close-to-head fit provides better protection against debris, dust, or other contaminants. The simple design and construction made of polycarbonate and TPR polymer increase resistance to mechanical damage.
The lens is finished with a Platinum coating, which minimizes fogging and potential scratches. The bronze-tinted lens has a light transmission coefficient of 40%. Thanks to the low-profile design and streamlined shape, these safety glasses pair well with additional protective equipment, such as active ear protection or safety helmets.
Features: Lens color Brown Light transmission VLT 40% Coating Platinum Lens thickness 2.2 mm Filter UV radiation Standards EN ISO 16321-1
GL2 CT 1 KNMaterial Polycarbonate
TPR polymerWeight 34 g Frame color Grey black -
Earmor – M55 PTT Module for Headsets – NATO Military Standard 7.0 – M55-KENWOOD
€ 43,90 Add to cartEarmor – M55 PTT Module for Headsets – NATO Military Standard 7.0 – M55-KENWOOD
The Earmor M55 Push-To-Talk module enables communication at the touch of a button. The module consists of a polymer housing with an integrated large round button and a rotating mount. Two cables emerge from it: the first is 75 cm long and ends with a Kenwood 2-pin connector. The second cable, with a MIL-STD 4-pin connector, allows for the connection of hearing protection devices that meet the NATO 7.0 standard.
The button is intuitive to use and requires little force to activate. Rotating the base with the housing allows the user to position the equipment ergonomically. A D-ring on the spring clip allows the button to be attached to a carabiner or secured to gear with paracord.
Features:
- M55 PTT module for connecting a radio to hearing protection
- Kenwood 2-pin connector and MIL-STD 4-pin connector
- Polymer housing with a large, round button
- Rotating module mount
- Cable over half a meter long allows for proper cable management
- Spring-loaded clip allows the module to be attached in an easily accessible location
- Slim steel D-ring above the spring clip
-
EARMOR – PTT M51-MIL TACTICAL HEADSET MODULE – NATO MILITARY STANDARD 7.0 – M51-6PIN-MIL-PRC
€ 89,90 Add to cartEARMOR – PTT M51-MIL TACTICAL HEADSET MODULE – NATO MILITARY STANDARD 7.0 – M51-6PIN-MIL-PRC
The Earmor M51-MIL Push-To-Talk module allows communication only with the press of a button. The module features a cable over half a meter long, which, combined with a durable clip, makes it easy to position in a location convenient for the user. A 6-pin plug meeting NATO Military Standard 7.0 allows the module to be connected to a wide range of devices, such as walkie-talkies and radios. The module has a large central button with a rubberized surface that is easily felt under the finger.
Features:
- M51-MIL PTT module for connecting radios to headphones (e.g., EARMOR M32 Plus)
- NATO Military Standard 7.0 plug
- Allows connecting headphones to communication equipment
- Cable over half a meter long allows for flexible module placement
- Spring clip allows you to attach the module in an easily accessible place
Features: Plug NATO Military Standard 7.0 6-pin Compatibility Earmor hearing protection Cable length 55 cm Dimensions 65 x 40 x 40 mm Material Polymer Weight 115 g Color Black -
Earmor – M31 Mark4 Active Hearing Protectors – Black – M31-BK-MARK4
€ 195,00 Add to cartEarmor – M31 Mark4 Active Hearing Protectors – Black – M31-BK-MARK4
The Mark4 version of Earmor M31 hearing protectors are active earmuffs that suppress noise over 82 dB. They effectively protect hearing while amplifying ambient sounds via two directional microphones. Compared to the previous generation, the new Earmor model features a shorter response time and five volume levels.
They provide situational awareness through spatial sound, which is crucial in tactical situations or at the shooting range for orientation. The Mark4 has a pressure response time of less than 1 ms. This rapid response allows for safe, long-term use in noisy environments.
The earmuffs come factory-fitted with silicone gel-filled ear pads. Additionally, replaceable PVC-coated foam inserts are included. This allows users to customize their hearing protection according to personal preference and increase comfort.
The modular design allows the earmuffs to be attached directly to a tactical helmet using special adapters. The adapters are designed for ARC, EXFIL, and M-LOK systems. The earmuffs are powered by two AAA batteries (one in each cup) and can operate for up to 60 hours in active mode.
The polymer housing meets the IPX5 waterproof standard, making them safe to use even in the rain. The earmuffs are packaged in a protective padded case with a handle. A carrying pouch is also included, which saves space in your range bag while protecting the earmuffs from scratches.
-
VECTOR OPTICS – PARAGON 10×42 RANGEFINDER BINOCULARS – BLACK – SCBRF-02
€ 775,00 Add to cartVECTOR OPTICS – PARAGON 10×42 RANGEFINDER BINOCULARS – BLACK – SCBRF-02
The Vector Optics Paragon 10×42 features integrated laser rangefinding with a reach of up to 2300 m, utilizing BK-7 glass lenses with Broadband Anti-Reflective (BBAR) coating to ensure superior light transmission and a crisp image at 10x magnification.
A 19 mm eye relief allows for comfortable viewing even with corrective eyewear, while the central focus system and +/- 5 diopter adjustment ensure precise image tuning. The unit features a minimum focus distance of 5.5 m and is powered by a single CR2 battery housed in a tool-free compartment at the base.
The integrated Class 3R laser rangefinder offers multiple modes, including continuous scan and +/- 60° angle measurement, displaying results on an OLED screen with nine brightness levels for clear readings in any light. Measurement accuracy is +/- 1 meter up to 250 meters and +/- 2 meters beyond that distance.
Built from PPS polymer for high impact, temperature, and weather resistance, the housing meets IP67 standards, ensuring protection against dust and immersion in up to 1 meter of water for 30 minutes. The device is rated for operation from -10°C to +50°C.
The set includes a fabric neck strap and a carrying case for secure transport in bags or backpacks. Rubber lens caps protect the glass from dirt and scratches, while a dedicated cleaning cloth in a clip-on pouch ensures maintenance is always within reach.
Features:
- 10×42 binoculars with integrated laser rangefinder and OLED display
- Distance measurement up to 2300 m (reflective) with +/- 2 m accuracy
- Nine display brightness levels for optimal visibility in all lighting conditions
- Inclinometer for angle correction up to +/- 60°
- Automatic selection of horizontal/angle modes
- BK-7 optical glass with anti-reflective coating for high light transmission
- Central focusing with diopter correction for both eyes
- IP67-rated housing waterproof up to 1 m for 30 minutes
-
EARMOR – PRODUCT DISPLAY STAND – PDQ
€ 9,90 Add to cartEARMOR – PRODUCT DISPLAY STAND – PDQ
Cardboard construction with two polymer risers for hanging Earmor products, featuring graphics of flagship ear protection models M31 Plus, M32 Plus, M300T, and M20T Pro. Allows for organized multi-product display with clear labeling, utilizing contrasting black and yellow colors to draw customer attention.
Features:
- Cardboard stand for Earmor headphone display
- Two risers for hanging packages
- Highlighted flagship models M31 Plus, M32 Plus, M300T and M20T Pro
- Prominent graphics showcasing headphones
- Self-supporting design, easy to assemble
-
Earmor – M300T Active Hearing Protectors – IPSC – 23 dB Noise Reduction – Bluetooth 5.4 – Coyote Brown – M300T-CB
€ 58,90 Add to cartEarmor – M300T Active Hearing Protectors – IPSC – 23 dB Noise Reduction – Bluetooth 5.4 – Brown – M300T-BLK
Earmor M300T Bluetooth active hearing protectors are officially licensed by the International Practical Shooting Confederation and approved for IPSC competitions. They suppress impulse noise while maintaining situational awareness of ambient sounds during dynamic shooting.
Earmor M300T are Bluetooth active hearing protectors designed for dynamic shooting, but are also suitable for noisy environments, listening to music, or hands-free phone use.
The Earmor M300T features clear voice tracking technology, improving voice recognition in the wearer’s environment and ensuring better communication quality.
They also feature Bluetooth 5.4 connectivity for music playback and call management.The headphones have two operating modes – with and without Bluetooth. The first allows phone connection, audio playback, and conversation, while the second transmits ambient sounds in three scenarios. They effectively reduce noise above 82 dB.
These hearing protectors are perfect for noisy environments such as shooting ranges, construction sites, and production halls.
Pressing the MFB button connects the protectors to a mobile device via Bluetooth 5.4; holding the MFB button for 2 seconds allows you to choose between three different modes.
Three ambient sound modes:
Ambient mode: Max amplification of quiet ambient sounds. Stay aware of your surroundings by improving situational awareness;
Clear voice: Optimizes conversation clarity, ensuring seamless communication. More effective in noisy environments;
Focus mode: Ambient sound amplification is turned off, only noise reduction is active, making it ideal for focused activities.Additionally, the ambient sound volume can be adjusted smoothly using the power and volume knob.
Earmor M300T active hearing protectors provide effective noise reduction at NRR 23 dB. They feature a flexible, adjustable headband made of a special composite material that is non-slip and ensures extra comfort during prolonged wear.
These active hearing protectors feature a foldable design and meet the IPX5 standard. They operate on 2 AAA batteries and are equipped with comfortable gel pads.
https://youtu.be/_mVfwMrkeyk
-
UTG 34″ ALPHA BATTLE CARRIER RAPID SLING PACK – BLACK – PVC-PSP34BX
€ 103,00 Add to cartUTG 34″ ALPHA BATTLE CARRIER RAPID SLING PACK – BLACK – PVC-PSP34BX
The UTG® 34″ Alpha Battle Carrier Rapid Sling Pack is designed for transporting firearms and shooting accessories, ensuring safe storage and portability. Made of durable, water-resistant polyester, it protects gear from rain, dust, and adverse weather.
The spacious main compartment accommodates a carbine up to 86 cm, featuring a removable separator to safely isolate two weapons. Three external pockets provide easy storage for magazines and ammunition, ensuring quick access while the carrying system maintains comfort during long expeditions.
Features:
- Durable and waterproof polyester construction
- Spacious main compartment for carbines up to 86 cm
- Removable separator for two rifles
- Three external pockets for magazines, ammunition, and accessories
- Comfortable carrying system with wide, adjustable straps
- Padded back panel for enhanced carrying comfort
- Discreet design ideal for everyday use
Features: Material Polyester Length 86 cm Width 33 cm Weight 2500 g Color Black -
VECTOR OPTICS – PARAGON SPOTTING SCOPE – 9-27×56 – ED – ULTRA-SHORT – SCSS-11
€ 315,00 Add to cartVECTOR OPTICS – PARAGON SPOTTING SCOPE – 9-27×56 – ED – ULTRA-SHORT – SCSS-11
Paragon adjustable magnification spotting scope, making it an excellent choice for long-range shooters, spotting hits at the range, and nature observers. Its compact dimensions and lightweight design allow for convenient transport in a backpack or tactical bag.
The 9–27x adjustable magnification range allows for optimal parameter selection based on observation distance, while the large objective lens ensures a wide field of view even at maximum magnification. Fully multi-coated optics provide a clear image with an extra-low dispersion (ED) factor.
The rubber-armored housing prevents slipping during use while protecting against impacts and scratches, with the included tripod ensuring stable observation.
Features:
- Durable rubber-armored construction
- Compact dimensions
- 9–27x magnification
- Fully multi-coated optics (FMC)
- Extra-low dispersion (ED) lenses
- Mountable on the included tripod
https://youtu.be/g23ZdPHfzOk
-
Bolle Safety – Small Semi-Rigid Polyester Eyewear Case – Black – PACCASR-2
€ 8,50 Add to cartBolle Safety – Small Semi-Rigid Polyester Eyewear Case – Black – PACCASR-2
Semi-rigid carrying case for safety glasses. Developed for most popular models. The outer layer is made of durable fiber-structured polymer, providing increased resistance while maintaining flexibility.
The interior is lined with soft fabric to protect glasses from scratches. The case features a zipper closure. It offers effective protection against crushing and scratching during transport. Its flat shape makes it easy to fit into a pants or jacket pocket.
Features:
- Semi-rigid safety eyewear case
- Fits most popular models
- Made of durable fiber-structured polyester
- Lined with soft fabric
- Zipper closure
- Protects glasses from crushing and scratches during transport
- Fits easily into clothing and backpack pockets
Features: Material Polyester External dimensions 176 × 87 × 54 mm Internal dimensions 170 × 70 × 50 mm Weight 55 g Color Black -
EARMOR – TACTICAL MOLLE HEADSET POUCH – S17
€ 19,00 Add to cartEARMOR – TACTICAL MOLLE HEADSET POUCH – S17
The pouch features webbing and is MOLLE-compatible, allowing for easy attachment to gear.
Constructed from durable 500D polyester, the design utilizes a high-quality Japanese YKK T-type zipper, ensuring it won’t snag during dynamic opening.
The pouch is equipped with an additional transport handle.
Technical data:
– dimensions: 127 x 178 x 38 mm
– weight: 100 g -
CALDWELL WIND WIZARD II WIND ANEMOMETER – 102579
€ 59,99 Add to cartCALDWELL WIND WIZARD II WIND ANEMOMETER – 102579
The Caldwell® Wind Wizard II is redesigned as the market’s best value wind meter, making it the ideal tool for indicating wind speed.
Knowing wind speed allows the shooter to judge shot placement in varying wind conditions.
Compact and portable, this wind meter reads wind and temperature in various units of measure.
A non-slip rubber sleeve protects the unit, ensuring an easy grip even with gloved hands. Operates on one CR2032 battery (included).
Product features:
– Wind speed readout in mph, ft/min, km/h, m/s, and knots
– Wind chill temperature reading
– Temperature display in Celsius and Fahrenheit
– LCD backlight
– Non-slip rubberized case
– Battery save mode
– 1x CR2032 battery (included)
– Compact dimensions and low weightTechnical data:
– Weight: 50 g
– Dimensions: 102 x 38 x 19 mm -
EARMOR – M11 ARC HELMET RAIL ADAPTER ATTACHMENT KIT FOR M31/M32 HEADSETS
€ 21,90 Add to cartEARMOR – M11 ARC HELMET RAIL ADAPTER ATTACHMENT KIT FOR M31/M32 HEADSETS
Replace the EARMOR M31/M32 headband or M31H/M32H helmet rail kit with the M11 ARC helmet rail adapter attachment kit, allowing you to attach your EARMOR hearing protector directly to ARC helmet rails.
Features:
– Durable, lightweight
– Rotatable for stowing EARMOR
– For ARC Helmet Rails (Ops-Core FAST MT)https://youtu.be/uMjZn5UDgz8
-
EARMOR – M12 EXFIL HELMET RAIL ADAPTER ATTACHMENT KIT
€ 21,90 Add to cartEARMOR – M12 EXFIL HELMET RAIL ADAPTER ATTACHMENT KIT
Replace EARMOR M31/M32 headband or M31H/M32H helmet rail kit with the M12 EXFIL helmet rail adapter attachment kit, allowing your EARMOR hearing protector to attach directly to EXFIL helmet rails.
Features:
– Durable, lightweight
– Rotatable for stowing EARMOR
– For EXFIL helmet railshttps://youtu.be/uMjZn5UDgz8
-
EARMOR MAXDEFENSE FOAM EARPLUGS – M02
€ 0,49 Add to cartEARMOR MAXDEFENSE FOAM EARPLUGS
Soft, hypoallergenic foam ensures high comfort while minimizing ear pressure.
Smooth, dust-resistant surface facilitates easy hygiene maintenance.Tapered design allows the plugs to easily adapt to the ear canal shape.
This model includes a vinyl cord for wearing the earplugs around the neck.
Noise reduction: 33 dB
Material: polyurethane foam
Color: yellow/blue
Length: 25 mm
Width: 12 mm
Complies with CE/RoSH/ANSI 3.17-1976/AS-NZS standards -
Earmor – M51 PTT Military Standard Version – Kenwood – M51-KEN
€ 34,00 Add to cartEarmor – M51 PTT Military Standard Version – Kenwood – M51-KEN
PTT Military module for use with Earmor™ headsets and similar models.
Made of lightweight and durable polymer. Large, easy-to-find button.
Thanks to the robust steel clip, the module can be mounted on a vest. Rubber inside the clip protects the gear from damage.Mini Jack socket allows for use of the optional M50 Finger Push Button.
Additional features:
– Socket: 4-Conductor NATO Plug
– Plug: Kenwood
– Weight: 85 g -
Earmor – M32 PLUS Electronic Hearing Protectors – Black – M32-BK (PLUS)
Original price was: € 96,00.€ 81,90Current price is: € 81,90. Add to cartEarmor – M32 PLUS Electronic Hearing Protectors – Black – M32-BK (PLUS)
The M32 PLUS headset provides noise reduction during direct communication with Earmor. It protects against dangerous noise through passive sound insulation and immediate suppression of loud noise sources. Two directional microphones, mounted on the outside of each cup and played through speakers inside the headphones, manage the device’s operation.
The M32 Plus features a traditional headband with an adjustable frame and soft padding to ensure stability on the user’s head. Microphones mounted on the outside of the earcups capture sound so that the direction of the source can be determined with relative accuracy. Harmful noise is limited to 82 dB, with a base attenuation value of 22 dB.
The microphone boom can be removed as needed. The integrated cable with a NATO Military Standard 7.0 plug allows the headset to be used with a compatible PTT button. Please note that the headset is compatible with Earmor PTT modules and the manufacturer does not support use with civilian wiring.
2024. Model year updates:
- Updated design with the latest technology
- Improved headphone performance
- New silicone gel pads for better comfort during long-term use
- Updated headband for quick and hassle-free removal
https://youtu.be/2S2EzvalIhM
-
Earmor – Finger Push Button for M51 PTT – M50
€ 11,90 Add to cartEarmor – Finger Push Button for M51 PTT – M50
Small size push button for the Earmor™ M51 PTT model.
It has an extra clip and a velcro strap as well as a 1.2 m cable for easy attachment to a vest, etc.
Plug: threaded mini jack.
Color: black. -
Bolle Safety – Safety Goggles – PILOT – Smoke – PILOPSF
€ 20,99 Add to cartBolle Safety – Safety Goggles – PILOT – Smoke – PILOPSF
Bolle Safety PILOT goggles. Their ventilated frame guarantees unequalled adaptability and comfort. Ideal for tactical use in dusty environments.
The ultra-flexible TPV frame guarantees adaptability and matchless comfort, with or without prescription spectacles.
Features:
– Excellent field of vision
– Very flexible PP/TPR frame
– Adjustable strap
– Fits over prescription glasses
– PLATINUM Anti-scratch anti-fog coatingPlatinum® coatings – Bollé Safety revolutionizes eye protection with an innovation that exceeds the requirements of all international standards, especially the EN166 K (resistance to surface damage by fine particles) and N (resistance to fogging) option.
This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd/m²), to the most aggressive chemicals and delays the onset of fogging for 2 minutes. In all circumstances and at all times the PLATINUM lens innovation guarantees your eyes improved protection.
Weight: 89 g
Lenses classification: 1 BT 9 KN
Frame classification: 3 4 9 BT
Optical class: 1
Risks relating to radiations: 5-3.1 EN 172
Standards: EN166 CE -
IMI DEFENSE – RSF POLYMER RIFLE SAFETY FLAG – ORANGE – IMI-ZT004
€ 6,90 Add to cartIMI DEFENSE – RSF POLYMER RIFLE SAFETY FLAG – ORANGE – IMI-ZT004
The IMI Defense safety flag visually confirms an empty rifle chamber, featuring a flexible, high-strength composite construction with elastic properties for enhanced mechanical resistance and long service life.
Correct placement in the chamber effectively prevents accidental bolt release, significantly reducing the risk of accidental discharge. The design includes an integrated screwdriver and a pin punch tip for added functionality.
Features:
- Signals an empty chamber
- Designed for use with rifles
- High-visibility color ensures easy identification and increased safety
- Made of flexible and durable composite material
- Tip designed for driving out pins
- Integrated screwdriver
- Flag is not compatible with .22 LR caliber firearms.
Features: Intended use Rifle safety flag Dimensions 8 x 4 x 1 cm Weight 7 g Color Orange -
MIL-TEC – RIFLE BAG – GREEN – 100CM – 16191001-902
€ 34,50 Add to cartMIL-TEC – RIFLE BAG – GREEN – 100CM – 16191001-902
– Main compartment with hook-and-loop straps
– 5 external pockets with hook-and-loop closure
– Adjustable shoulder strap
– Carrying handle with hook-and-loop wrap
– MOLLE loops for attaching additional gear
– Lockable
– Material: 100% polyester -
Bolle – Glasses Case – Polyester – Black – ETUIB
€ 5,90 Add to cartBolle – Glasses Case – Polyester – Black – ETUIB
The Bolle ETUIB case is compatible with Bolle brand glasses. It allows you to carry and store your glasses safely, reducing the risk of crushing or scratching. The case is made of durable polyester with a structure resistant to abrasion and deformation. The rigid walls hold the shape of the case, protecting lenses and frames from pressure and accidental damage.
The interior is lined with soft fabric to prevent scratches, and a Velcro closure allows quick access to the contents. The case is equipped with a snap hook and belt loop, allowing it to be carried on a mount or carry bag. The design is sized to hold most models of Bollé safety glasses.
Features:
- Protective case for storing and transporting safety glasses
- Made of polyester resistant to mechanical abrasion and moisture
- Interior lined with soft lining to protect against scratches
- Velcro closure protects against accidental opening and allows quick access
- Equipped with a belt loop and snap hook
- Compatible with most Bolle safety glasses models
- Rigid construction ensures lens protection during transport
Features: Material Polyester Dimensions 190 x 80 x 75 mm Weight 45 g Color Black -
Bolle Tactical – Ballistic Goggles – Chronosoft II – CHROKADESI
€ 52,90 Read moreBolle Tactical – Ballistic Goggles – Chronosoft II – CHROKADESI
The CHRONOSOFT model is well-known among high-temperature specialists (firefighters). Its TPR frame can withstand extreme heat and its double lens with EQUALIZER technology effectively combats fogging.
Thanks to its large adjustable strap, CHRONOSOFT also offers ample comfort and effective protection from fire or extreme temperatures.
Product pros:
– Panoramic field of vision
– Double ballistic lens
– Anti-scratch and anti-fog coatings
– Comfort foam
– High comfort material frame
– Can be worn over prescription glasses
– Spectacles
– Ventilated frameLens classification: BT 9
Frame classification: 3 4 5 BT 9
Optical quality: 1
Filters: 2C-1, 2 according to EN 170 – UV
Standards: CE EN166
Lens: Clear
Frame: Black
Weight: 142 g -
STRONG MAGNET WITH BELT MOUNT 65 MM
€ 12,90 Add to cartSTRONG MAGNET WITH BELT MOUNT 65 MM
This heavy-duty magnet with belt attachment can be used as a quick-access magazine pouch. The magnet features a 65 mm diameter and is rubber-coated, preventing scratches on your magazines.
The belt clip fits belts up to 50 mm wide. It features a quick-release lock for easy installation.
The belt clip release button is lockable (on/off).
The magnet can also be used without the belt clip, allowing it to be mounted to gear or magazine pouches using an M5 bolt.
Features:
- Magnet dimensions: d 65 mm / thickness 8 mm
- Belt clip dimensions: width 50 mm / height 85 mm
- Quick-release lock
- Adjustable for belts 10-50 mm
- Weight 155 g
-
MAGLULA – UPLULA UNIVERSAL PISTOL MAGAZINE SPEED LOADER
€ 42,90 Add to cartMaglula – UpLULA Universal pistol magazine speed loader
Universal magazine speed loader from the renowned Maglula Ltd.
The magazine speed loader is designed for pistol magazines, significantly accelerating the loading process.Fits 9 mm, .357 SIG, 10 mm Auto, .40 S&W, and .45 ACP double-stack magazines.
For loading single-stack pistol magazines, use the separately sold adapter.
The speed loader weighs only 74 g, making it easy to take to the range.
-
Earmor – M32X-MOD4 active hearing protectors – green – M32X-FG(PLUS)
€ 122,90 Add to cartEarmor – M32X-MOD4 active hearing protectors – green – M32X-FG(PLUS)
Electronic active hearing protectors with an integrated microphone on a retractable headband. They suppress sounds over 82 dB without interfering with normal conversation. This is made possible by directional microphones placed on both sides of the earcups. They pick up sounds like gunfire or industrial machinery noise and suppress them.
For communication, the user has five volume settings. The Noise Reduction Rating (NRR) is 22 dB. The headset features a NATO-standard TP-120 U-174 plug, allowing connection to Earmor PTT units. The earcups are made of durable, hard polymer designed to withstand rugged use.
Features:
M32X-MOD4 active hearing protectors
Protect hearing from sounds over 82 dB without hindering conversation
Two directional microphones, one on each earcup cover
Noise Reduction Rating 22 dB
TP-120 U-174 connection meets NATO standards
Works well in environments with elevated noise levels
Compatible with M51/M52 PTT sets
Covers made of durable and long-lasting polymer
Includes M16C helmet mount meeting ARC standards
Technical specifications
Noise Reduction Rating (NRR) 22 dB
Noise suppression over 82 dB
Connectivity T -
MAGPUL – DAKA BINS 2X4, 2X2 FOR DAKA HARD CASE – BLACK – MAG1389-BLK
€ 39,99 Add to cartMAGPUL – DAKA BINS 2X4, 2X2 FOR DAKA HARD CASE – BLACK – MAG1389-BLK
This three-bin set organizes maintenance gear, accessories, or small items within the Magpul DAKA® Hard Case. Integrated feet on the lids allow for secure stacking when used outside the case, while the durable polymer construction and transparent lids ensure quick content identification.
A top-mounted dot matrix allows for easy labeling and identification. Secure latches prevent accidental opening during transport, while the base feet interface perfectly with the Magpul GRID system for a locked-in fit. The set includes two 2×2 square bins and one 2×4 rectangular bin.
Features:
- Three bins for organizing small items in DAKA® Hard Cases
- Securely interface with GRID openings inside the case
- Two small 2×2 square bins and one 2×4 rectangular bin
- Rigid walls with transparent snap-on lids
- Stackable when used outside the case
- Resistant to moisture, oils, and chemicals
- Easy to clean with a damp cloth
-
MAGPUL – DAKA HARD CASE C35 – BLACK – MAG1290-BLK
€ 468,00 Add to cartMAGPUL – DAKA HARD CASE C35 – BLACK – MAG1290-BLK
The Magpul DAKA C35 hard case is designed for transporting firearms and accessories like magazines. Its streamlined polymer exterior protects contents and reduces the risk of case damage, made possible by intelligently designed corner bumpers. Additionally, the space between corners allows for storage of smaller items.
The DAKA GRID system consists of foam elements that effectively secure contents. Their layout is fully configurable without tools, allowing for customization to your specific needs. The EPP polymer used in the GRID organizer does not absorb moisture or liquids, making it easy to clean.
The case features a gasket protecting contents from dust and moisture. Two handles on the long and short sides facilitate carrying; it can be carried like a box or pulled on wheels. The closure uses two heavy-duty latches compatible with padlocks up to 11 mm in diameter.
Internal dimensions accommodate firearms up to 89.5 cm, fitting AR-15 carbines and compact builds. While the DAKA GRID organizes gear, the foam on the opposite side provides additional retention, being extremely soft and regaining its shape after pressure release.
-
Earmor – M300T Active Hearing Protectors – IPSC – 23 dB Noise Reduction – Bluetooth 5.4 – Green – M300T-FG
€ 58,90 Add to cartEarmor – M300T Active Hearing Protectors – IPSC – 23 dB Noise Reduction – Bluetooth 5.4 – Black – M300T-BLK
Earmor M300T Bluetooth active hearing protectors are officially licensed by the International Practical Shooting Confederation and approved for IPSC competitions. They suppress impulse noise while maintaining situational awareness of ambient sounds during dynamic shooting.
Earmor M300T are Bluetooth active hearing protectors designed for dynamic shooting, but are also suitable for noisy environments, listening to music, or hands-free phone use.
The Earmor M300T features clear voice tracking technology, improving voice recognition in the wearer’s environment and ensuring better communication quality.
They also feature Bluetooth 5.4 connectivity for music playback and call management.The headphones have two operating modes – with and without Bluetooth. The first allows phone connection, audio playback, and conversation, while the second transmits ambient sounds in three scenarios. They effectively reduce noise above 82 dB.
These hearing protectors are perfect for noisy environments such as shooting ranges, construction sites, and production halls.
Pressing the MFB button connects the protectors to a mobile device via Bluetooth 5.4; holding the MFB button for 2 seconds allows you to choose between three different modes.
Three ambient sound modes:
Ambient mode: Max amplification of quiet ambient sounds. Stay aware of your surroundings by improving situational awareness;
Clear voice: Optimizes conversation clarity, ensuring seamless communication. More effective in noisy environments;
Focus mode: Ambient sound amplification is turned off, only noise reduction is active, making it ideal for focused activities.Additionally, the ambient sound volume can be adjusted smoothly using the power and volume knob.
Earmor M300T active hearing protectors provide effective noise suppression at NRR 23 dB. They suppress impulse noise while maintaining situational awareness during dynamic shooting. They feature an adjustable, flexible headband made of a special composite material that is non-slip and ensures comfort during prolonged wear. Additionally, the protectors are equipped with Bluetooth 5.4 for wireless connectivity with mobile devices.
These active earmuffs feature a foldable design and are IPX5 compliant. They are powered by 2 AAA batteries and come equipped with comfortable gel pads.
https://youtu.be/_mVfwMrkeyk
-
Earmor – M300T Active Hearing Protectors – IPSC – NRR 23 dB – Bluetooth 5.4 – Black – M300T-BLK
€ 58,90 Add to cartEarmor – M300T Active Hearing Protectors – IPSC – NRR 23 dB – Bluetooth 5.4 – Black – M300T-BLK
Earmor M300T Bluetooth active hearing protectors are officially licensed by the International Practical Shooting Confederation and approved for IPSC competitions. They suppress impulse noise while maintaining situational awareness of ambient sounds during dynamic shooting.
Earmor M300T are Bluetooth active hearing protectors designed for dynamic shooting, but are also suitable for noisy environments, listening to music, or hands-free phone use.
The Earmor M300T features clear voice tracking technology, improving voice recognition in the wearer’s environment and ensuring better communication quality.
They also feature Bluetooth 5.4 connectivity for music playback and call management.The headphones have two operating modes – with and without Bluetooth. The first allows phone connection, audio playback, and conversation, while the second transmits ambient sounds in three scenarios. They effectively reduce noise above 82 dB.
These hearing protectors are perfect for noisy environments such as shooting ranges, construction sites, and production halls.
Pressing the MFB button connects the protectors to a mobile device via Bluetooth 5.4; holding the MFB button for 2 seconds allows you to choose between three different modes.
Three ambient sound modes:
Ambient mode: Max amplification of quiet ambient sounds. Stay aware of your surroundings by improving situational awareness;
Clear voice: Optimizes conversation clarity, ensuring seamless communication. More effective in noisy environments;
Focus mode: Ambient sound amplification is turned off, only noise reduction is active, making it ideal for focused activities.Additionally, the ambient sound volume can be adjusted smoothly using the power and volume knob.
Earmor M300T active hearing protectors provide effective noise reduction at NRR 23 dB. They feature a flexible, adjustable headband made of a special composite material that is non-slip and ensures extra comfort during prolonged wear.
These active hearing protectors feature a foldable design and meet the IPX5 standard. They operate on 2 AAA batteries and are equipped with comfortable gel pads.
https://youtu.be/_mVfwMrkeyk
-
Earmor hard shell headset carrying case, black S16-BK
€ 24,40 Add to cartEarmor hard shell headset carrying case, black S16-BK
A hard shell headset carrying case from Earmor for active hearing protection, passive, and standard headphones. The dimensions allow for comfortable storage of folded headsets with a rigid headband. An additional feature of the S16A is an extra compartment for glasses or small tools. The user also has a zippered mesh pocket and an open pocket.
The case is made of nylon, with internal compartments serving as additional reinforcement and the opposite wall lined with microfiber. It features a two-way zipper with a rubber handle bearing the manufacturer’s logo. A Velcro panel on the front allows for personalization with patches, including the included manufacturer’s patch. The entire case features a nylon carrying handle, further reinforced with polymer.
Features:
- Hard shell case for hearing protection and headsets
- Fits headsets with a rigid headband
- Includes extra compartment for glasses, separate open pocket, and mesh organizer
- Made of nylon with multiple internal reinforcements
- Closed with a two-way zipper
- Microfiber-lined panel for better cushioning
- Comfortable polymer-reinforced carrying handle
- Velcro panel on the front
- Includes manufacturer’s patch
- Material: Nylon
- External dimensions: 22 x 18 x 11.5 cm
- Internal dimensions: 21 x 16.5 x 11 cm
- Velcro compartment dimensions: 9.5 x 5.5 cm
- Weight: 384 g
-
Earmor MaxDefense Silicone Earplugs M04 100pcs
€ 43,50 Add to cartEarmor MaxDefense Silicone Earplugs M04 100pcs
Earmor™ MaxDefense silicone earplugs feature a triple-flange design for high comfort and a noise reduction rating (NRR) of 23 dB.
Their pre-molded silicone construction is especially useful when dirty hands prevent the rolling and shaping required for standard foam plugs.
This model includes a vinyl cord for wearing the earplugs around the neck.
Features:
– Unique, patented triple-flange design
– Made of soft and durable material
– One size fits most ears
– Reusable
– No rolling required
– Flexible cord included- Noise reduction: 23 dB
- Material: Silicone
- Color: Orange/Blue
- Total length: 32 mm
- Flange length: 16 mm
- Set of 100pcs
- Complies with CE/RoSH/ANSI 3.17-1976/AS-NZS standards























































