Shop
-
Vector Optics – Frenzy 1x22x26 MOS punapunktsihik – Picatinny
€ 169,90 Add to cart Shooting sportsVector Optics – Frenzy 1x22x26 MOS red dot
SCRD-36
Lightweight open type red dot sight with 3 MOA dot. The sight has 8 levels suitable for daylight and 2 modes suitable for use with night vision devices. A Picatinny rail mount is included.
Powered red dot sight made of 6061-T6 aluminum and powered by a single CR2032 battery. The waterproof unit is equipped with an auto shut-off feature to extend battery life.
Note: Product comes with a lifetime T-VIP manufacturer warranty.
Features:
- Sturdy 6061-T6 aluminum construction
- 3 MOA dot size
- Large viewfinder measuring 22 x 26 mm
- 10 aiming dot brightness levels – 8 for daylight and 2 for night vision
- Until 20,000 hr operation on one CR2032 battery in daylight mode on the setting with the weakest dot
- Low profile
- Ultralight weighing
- Weaver mount
- Waterproof standard IP67
- The device has a motion sensor with an automatic auto-off function after 2 minutes of inactivity
Included:
Red Dot Sight
Picatinny mount
Allen wrenches
Warranty card
Rubber sight cover
Cleaning cloth -
Vector Optics – Riflescope Constantine 1-8×24 – 30 mm – FFP
€ 319,00 Add to cart Shooting range equipmentVector Optics – Riflescope Constantine 1-8×24 – 30 mm – FFP
FFP – SCFF-32
The Constantine 1-8×24 30 mm FFP riflescope offers a magnification of 1-8x and allows both open-eye aiming with both eyes open in the absence of magnification and accurate shooting at further distances. The 24 mm objective lens with FMC-coated lenses provides good light transmission and clear contrast and clarity. The scope’s small size does not interfere with carrying a weapon with optics in a tactical bag.
The field of view is 35.78-4.54 meters at 100 meters, and the eye relief of 90 mm allows comfortable aiming. The VOF-EHT sighting reticle with LED illumination offers 11 levels of intensity, allowing you to adjust it to the lighting conditions. The 100m parallax adjustment minimizes errors when shooting at medium distances.
The vertical and horizontal adjustment range is 35 MIL, with a 1/10 MIL clique value for accurate sight alignment. The 30mm diameter tube is made of anodized 6061-T6 aluminum. The design is shockproof to 1,000 G, IPX6 waterproof and nitrogen-filled to prevent lens evaporation. The scope comes with a Weaver mount and lens caps. Power is provided by a CR2032 battery.
Features:
- VOF-EHT reticle rifle scope with FFP layout
- Magnification of 1-8x allows fast targeting at medium distances
- 24mm objective lens provides good light transmission in a compact size
- Multi-coated lenses improve contrast and image clarity
- Field of view 35.78-4.54 m at 100 m
- Eye relief distance of 90 mm for comfortable aiming
- Illumination of the targeting reticle at 11 intensity levels
- 100m parallax adjustment minimizes errors when shooting at medium distances
- Vertical and horizontal adjustment range of 35 MIL
- 1/10 MIL click value allows for accurate sight alignment
- Shock-resistant design up to 1000 G, made of anodized 6061-T6 aluminum
- Waterproof to IPX6 rating
- Nitrogen filling to prevent lens fogging
- Weaver mount and lens caps included
- Powered by a CR2032 battery
-
Vector Optics – Red Dot Pistol Mount Base for Glock – SCRDM-01
€ 28,90 Add to cart Optics mount ring and collimator mount baseVector Optics – Red Dot Pistol Mount Base for Glock – SCRDM-01
SCRDM‑01
Mounting plate for reflex sight made entirely of aluminum. Mounted in the place of the original rear sight in Glock type handguns.
Features:
- Made for specific mini red dot sights such as the SCRA-10A Sphinx and Frenzy series.
- For use on firearms.
- Designed for Glock pistols.
- Two mounting screws included.
- Made entirely of metal.
Features:
-
- Distance between poles: 40 x 20 mm
- Lenght: 46,1 mm
- Thickness: 3 mm
- Material: alumiinium
- Color: black
- Weight: 12 g
-
Smith & Wesson – Border Guard – SWBG1
Original price was: € 41,65.€ 35,90Current price is: € 35,90. Add to cart KnifeSmith & Wesson – Border Guard – SWBG1
Folding knife with a safe Locking ropes and belts, and striker for the window.
Blade opens with a thumb stud on both sides, and locked steel blockade linerlock. Linings made of aluminum handles with non-slip fills in the black.
Removable metal clip, the ability to mount a knife on a belt, pocket edge.
Steel: 420
Blade Lenght: 112 mm
Blade thickness: 3,5 mm
Overall length: 251 mm
Weight: 252 g
-
RifleCX – Care Spray – Teflon – 200 ml
€ 9,80 Add to cart Gun maintenance oilRifleCX – Care Spray – Teflon – 200 ml
Care spray preservative and repair preparation with DuPont Teflon. The main advantage of this product is its dedicated use for the maintenance of weapons and other surfaces. It is suitable for both metal and polymers. It creates a low-friction film and shines surfaces. It has conical and narrow tube nozzles. Thanks to the use of original DuPont Teflon, the formulation ensures quality at a high level.
The preservative-repair formula can also be used to clean other things such as long windcheaters, things or equipment in the workshop. The 500 ml can will last for a long time, so the user does not have to worry about sudden exhaustion of the product. It provides protection against abrasion, UV, aggressive chemicals, and is non-toxic and physiologically inert.
The product protects the coated surface from the adhesion of dirt and other deposits, further preventing deposition and the formation of new compounds. In addition, the agent has deep penetrating properties, which means that it will thoroughly cover the surface with which it comes into contact. The Teflon it contains facilitates replacement and heat protection, which translates into a longer life for parts coated with Care Spray.
Technical data
Capacity: 200 ml
Lubricant: Teflon
Height: 192 mm
Diameter: 52 mm
Tube length: 101 mm -
RifleCX – Gun Cleaner – 200 ml
€ 8,50 Add to cart Gun maintenance oilRifleCX – Gun Cleaner – 200 ml
RifleCX – Gun Cleaner Dedicated gun cleaner for firearms. Designed to simplify and shorten the gun cleaning process. The gun cleaner with a special composition is released under high pressure so it will effectively remove dirt, carbon build-up, deposits of lead, copper, nickel, as well as oil and grease without the need to use a brush. Included with the cleaner is a tube that allows you to accumulate the stream, increasing its pressure and thus its effectiveness.
The cleaner evaporates quickly leaving a dry and clean surface. For further maintenance, you can use RifleCX 48306 maintenance and repair product or RifleCX 48308 gun oil. Gun cleaner does not damage plastic or wooden parts. It does not contain chlorinated solvents, which means it is safe for cleaning weapons, as well as, for example, long guns, ASG replicas and others.Capacity: 200 ml -
RifleCX – Care Spray – Teflon – 500 ml
€ 13,80 Add to cart Gun maintenance oilRifleCX – Care Spray – Teflon – 500 ml
Care spray preservative and repair preparation with DuPont Teflon. The main advantage of this product is its dedicated use for the maintenance of weapons and other surfaces. It is suitable for both metal and polymers. It creates a low-friction film and shines surfaces. It has conical and narrow tube nozzles. Thanks to the use of original DuPont Teflon, the formulation ensures quality at a high level.
The preservative-repair formula can also be used to clean other things such as long windcheaters, things or equipment in the workshop. The 500 ml can will last for a long time, so the user does not have to worry about sudden exhaustion of the product. It provides protection against abrasion, UV, aggressive chemicals, and is non-toxic and physiologically inert.
The product protects the coated surface from the adhesion of dirt and other deposits, further preventing deposition and the formation of new compounds. In addition, the agent has deep penetrating properties, which means that it will thoroughly cover the surface with which it comes into contact. The Teflon it contains facilitates replacement and heat protection, which translates into a longer life for parts coated with Care Spray.
Technical data
Capacity: 500 ml
Lubricant: Teflon
Height: 233 mm
Diameter: 66 mm
Tube length: 113 mm -
Vector Optics – Mounting Adapter for CZ Shadow/Shadow 2/SP-01/P-10C – Black – SCFRM-21
€ 33,90 Add to cart Optics mount ring and collimator mount baseVector Optics – Mounting Adapter for CZ Shadow/Shadow 2/SP-01/P-10C – Black – SCFRM-21
A universal plate for mounting collimators to the Frenzy-X series pistol and MGT/MOJ/TEK/GIN standard from Vector Optics. A series of marked holes along with instructions allow you to easily identify the mounting point for your collimator. It is made of milled 7075-T6 aluminum alloy with an anodized surface.
Technical data Compatibility CZ Shadow 2 Compact®
CZ Shadow 2 Standard®
CZ Shadow 2 Optics Ready Compact®
CZ Shadow 2 Optics Ready Standard®
CZ 75 Shadow®
CZ 75 SP-01®
CZ P-10 C®Mounting Frenzy-X
MGT
MOJ
TEK
GINMounting plate dimensions 52 x 28 mm Material Aluminum 7075-T6 Weight 12 g Color Black -
Vector Optics – Extreme High AR Scope Mount 30 mm – Picatinny – Black
€ 39,90 Add to cart Optics mount ring and collimator mount baseVector Optics – Extreme High AR Scope Mount 30 mm – Picatinny – Black
A one-piece scope mount with a 30mm tube, primarily for the AR platform from Vector Optics. Its elongated design allows to increase the distance of the eye from the scope’s eyepiece. The execution of the mount’s body from milled 6061-T6 aluminum has preserved high rigidity, which is crucial when withstanding the loads generated when the weapon is fired.
Features:
- One-piece scope mount that raises the aiming line by 50 mm
- Picatinny standard mount, based on two strikers
- CNC machined from 6061-T6 aluminum alloy
- Extended design allows for increased eye relief
- Compatible with 30mm diameter tubes
- Each mounting ring has been secured with four screws
- Construction bolted with Torx T15 screws
Technical data Tube diameter 30 mm Height of the aiming line 50 mm
1,97″Mounting Picatinny Ring spacing 73 mm Spacing between mounting lugs 50 mm Mounting screws Torx T15 Screw tightening torque 2 to 2.4 Nm Dimensions 140 x 72 x 45 mm Material Aluminum 6061-T6 Weight 161 g Color Black -
Holosun – Protection Cap – 507C
€ 8,50 Add to cart Shooting sportsHolosun – Protection Cap – 507C
Polymer cover for Holosun 507C collimators. Protects the weapon-mounted collimator during transport without removing it and losing zeroing. Protects against mechanical damage, dirt, rain and accidental activation. Being made of lightweight and durable polymer, it does not significantly affect the weight of the weapon.
Features:
- Cover for collimator sight
- Allows you to protect the collimator from moisture and damage
- Made of lightweight, durable polymer
- Fitted design to prevent slipping during transport
- Designed for Holosun 507C collimators
-
Earmor – Replacement Ear Muffs for M31 PLUS and M32 PLUS
€ 13,90 Add to cart Hearing ProtectionEarmor – Replacement Ear Muffs for M31 PLUS and M32 PLUS
Replacement sponges for Earmor’s M31 PLUS or M32 PLUS passive hearing protectors. They ensure comfortable wearing even for many hours and high noise suppression efficiency. Made of high-quality PVC, the sponges ensure a good fit to the shape of the head, which is important for both comfort and safety of the user. The airtightness of the ear protectors is important both at the shooting range and in high noise working environments.
Features:
- Replacement sponges designed for M31 PLUS and M32 PLUS Earmor ear protectors
- Seal the ear protectors without having to replace the entire headphones
- Made of PVC and soft foam for comfortable wear
- Quick installation without tools
- Improve hygiene of use and extend the life of the ear protectors
- Dimensions 86 x 105 x 20 mm
-
RifleCX – LongTerm Protector – Teflon – 500 ml
€ 14,50 Add to cart Gun maintenance oilRifleCX – LongTerm Protector – Teflon – 500 ml
Preservative preparation in spray with Teflon. The main advantage of this product is its dedicated use for long-term maintenance of weapons and other surfaces. It is suitable for both metal and polymers.
Features:
- Preservative Protector with Teflon
- Dedicated weapon preservative
- Great for long-term storage of equipment
- Suitable for metals and polymers
- Forms a low friction film
- Protects surfaces from corrosion
- Features two nozzles – conical and narrow
- Protects surfaces from dirt and corrosion
- Works in any position
- Large can – 500 ml capacity, weight 433 g
-
UTG – Bungee Sling QD Gun Sling – 1-Point – Black
€ 43,90 Add to cart Gun slingUTG – Bungee Sling QD Gun Sling – 1-Point – Black
The Bungee Sling QD is a functional tactical accessory that significantly increases the user’s comfort when carrying a weapon. The flexible bungee design translates into comfortable carrying of the weapon, reducing the load on the shoulders and back, and allows the user to quickly fold up to fire.
The sling is made from a combination of heavy-duty nylon webbing and an elastic insert, which guarantees its durability and resistance to damage. The QD system allows instant installation and removal with one hand, even with tactical gloves. The ability to adjust the length of the suspension in the range of 107-147 cm allows for quick adjustment to the user’s height and physique.
Features:
- Single-point tactical suspension
- Made of nylon webbing and elastomeric material
- Flexible bungee type design
- Mounting with QD
- Adjustable in length, 107-147 cm
- Color black
- Weight 226 g
-
RifleCX – Barrel Foam – 500 ml
€ 24,50 Add to cart Gun maintenance oilRifleCX – Barrel Foam – 500 ml
Barrel cleaning foam from RifleCX, with it you can quickly and efficiently clean the barrel. Thanks to its composition, the foam effectively softens and loosens baked-on dirt, carbon build-up and residues of lead, nickel, as well as copper. At the same time, it remains safe for the barrel furrows, without damaging them. The foam can be introduced using a polymer tube with a length of 60 centimeters.
The foam from RifleCX maintains its density for a much longer period of time, so it does not flow out of the barrel and works longer in contact with contaminants. After applying the foam, all you have to do is wait 10 minutes and wipe it with a ramrod and then with a wipe. It can also be successfully used to clean weapons, as well as long guns, for example.
Features:
- Barrel cleaning foam
- Maintains density for a longer period of time
- Effectively softens and loosens baked-on dirt and carbon build-up
- Safe for barrel grooves
- 60 cm long polymer tube
- Makes barrel cleaning easier and faster
-
RifleCX – Silencer Cleaner CX80 – 600 ml
€ 15,99 Add to cart Gun maintenance oilRifleCX – Silencer Cleaner CX80 – 600 ml
Silencer Cleaner CX80 from RifleCX is a specialized agent designed for cleaning shooting suppressors. It provides fast and effective removal of gunpowder deposits, carbon build-up and other contaminants, restoring full functionality to the suppressor. The product is safe for metal and does not cause corrosion.
It can be used for both strippable and non-strippable silencers. The product is recommended for steel mufflers, with aluminum mufflers oxidation damage may occur. It can also be successfully used to clean weapons, as well as long guns, for example.
Features:
- Designed for cleaning shooting suppressors
- Can be used for strippable and non-strippable suppressors
- Safe for metal
- Provides excellent protection against wear and deposits
- Formulated with surfactants as well as corrosion inhibitors to prevent metal corrosion
- Works well without the need to heat the preparation
- Large capacity 600 ml
-
Scabbard for wz. 98 knife
€ 11,90 Add to cart KnifeScabbard for wz. 98 knife
Knife sheath wz. 98 made of durable plastic. Equipped with two lugs 32 mm and 60 mm wide and two holes for the tape, thanks to which it can be attached to the belt.
Features:
- Scabbard for combat knife wz. 98
- Made of high-impact plastic
- Lugs for mounting on belts up to 32 mm and 60 mm wide
- Two holes for webbing, rope or paracord
- Spring clip securing the knife in the scabbard
- Comes with nylon rope
-
Knife wz. 98Z – Serrated – Black
€ 58,90 Add to cart KnifeKnife wz. 98Z – Serrated – Black
Excellent wz. 98 knife, popular among the soldiers of the Polish Army, scouts and fans of survival. Partially serrated blade with a length of 173 mm and a thickness of 5 mm is made of 3H13 tempered spring steel.
Steel: tempered spring steel
Blade length: 175 mm
Overall length: 295 mm
Blade thickness: 5 mm
Weight: 263 g -
Muzzle Brake IPSC Multi, .223, 30 mm, 1/2x28TPI
€ 81,30 Add to cart CompensatorsMuzzle Brake IPSC Multi, .223, 30 mm, 1/2x28TPI
Specifications:
- width: 28mm
- total length: 71 mm
- length added to the barrel: 57 mm
- height: 25 mm / 0.98″
- weight: 108 grams / 3.9 oz (brake)
- muzzle thread: 1/2 x 28 TPI
- 3 threaded extra port for fine tune
- crush washer included
Nord Aarms advanced geometry muzzle brakes are designed to be highly effective in eliminating felt recoil and muzzle rise for quicker, more precise follow-up shots. Made of extremely strong stainless steel and treated with QPQ nitriding for superior durability, heat and corrosion resistance, they outlive most of the barrels and competitors’ products. Professional workmanship guarantees perfect concentricity for maximum accuracy.
-
MFT – EvolV 3 Comp for .223/5,56 mm – E2ARMD1-BL
€ 56,90 Add to cart CompensatorsMFT – EvolV 3 Comp for .223/5,56 mm – E2ARMD1-BL
Compensator that reduces recoil force with 4 ports. Two ports on either side direct gas horizontally, keeping recoil to a minimum. Three front teeth help direct the remaining gas and shock forward away from the shooter. All of these elements add up to a very comfortable compensator for indoor and outdoor shooters.
Technical data Material 416 stainless steel Length 50 mm Outside diameter 20 mm Weight 50 g Color Black -
Strike Industries – JCOMP Gen2 Compensator for AR – .223 / 5,56 mm – SI-JCOMP2-223/5,56
€ 73,00 Add to cart CompensatorsStrike Industries – JCOMP Gen2 Compensator for AR – .223 / 5,56 mm – SI-JCOMP2-223/5,56
Compensator designed for AR carbines of .223/5.56 mm calibre.
Features:
– Two-chamber design effectively neutralizes recoilTechnical data:
– weight: 101 g
– length: 65 mm
– external diameter: 22 mm
– internal diameter: 6,6 mm
– thread: 1/2-28
– calibre: .223 / 5.56 mm -
CZ 75/85/Shadow 1 Recoil Spring Buffer
€ 8,00 Add to cart Pistol accessoriesCZ 75/85/Shadow 1 Recoil Spring Buffer
The recoil reducer is designed for the CZ 75 stainless steel full‑length guide rod, compatible with CZ 75/85/Shadow 1 pistol models. This accessory is intended to reduce recoil and extend the service life of the firearm.
-
CMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Flat – 1/3 lb – 91504
€ 259,00 Add to cart AR PlatformCMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Flat – 1/3 lb – 91504
A cartridge-style drop-in trigger for AR15/AR10 platform carbines in the small pin (0.154″) variant from CMC Triggers. It allows modifying the trigger tongue assembly according to the user’s needs. The trigger tongue has a factory-set trigger pull force at a preset value, which is not subject to modification. After replacing the component, it is worth taking care to properly clean the remaining parts and use lubricants for weapon maintenance.
Technical data
Compatibility: AR15 / AR10
Trigger type: Two Stage
Trigger tongue: Curved
Trigger pull: 2 lb (0,9 kg)
Measure of microscopic irregularities (RMS) 1-2 µin (25-50 nm)
Material: 8620 carbon-nickel steel alloy S-7 steel 7075-T6 aircraft aluminum
Weight: 79 g
Color: Silver -
CMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Curved – 1/3 lb – 91502
€ 259,00 Add to cart AR PlatformCMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Curved – 2/2 lb – 92502
A cartridge-style drop-in trigger for AR15/AR10 platform carbines in the small pin (0.154″) variant from CMC Triggers. It allows modifying the trigger tongue assembly according to the user’s needs. The trigger tongue has a factory-set trigger pull force at a preset value, which is not subject to modification. After replacing the component, it is worth taking care to properly clean the remaining parts and use lubricants for weapon maintenance.
Technical data
Compatibility: AR15 / AR10
Trigger type: Two Stage
Trigger tongue: Curved
Trigger pull: 2 lb (0,9 kg)
Measure of microscopic irregularities (RMS) 1-2 µin (25-50 nm)
Material: 8620 carbon-nickel steel alloy S-7 steel 7075-T6 aircraft aluminum
Weight: 79 g
Color: Silver -
CMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Curved – 2/2 lb – 92502
€ 259,00 Add to cart AR PlatformCMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Curved – 2/2 lb – 92502
A cartridge-style drop-in trigger for AR15/AR10 platform carbines in the small pin (0.154″) variant from CMC Triggers. It allows modifying the trigger tongue assembly according to the user’s needs. The trigger tongue has a factory-set trigger pull force at a preset value, which is not subject to modification. After replacing the component, it is worth taking care to properly clean the remaining parts and use lubricants for weapon maintenance.
Technical data
Compatibility: AR15 / AR10
Trigger type: Two Stage
Trigger tongue: Curved
Trigger pull: 2 lb (0,9 kg)
Measure of microscopic irregularities (RMS) 1-2 µin (25-50 nm)
Material: 8620 carbon-nickel steel alloy S-7 steel 7075-T6 aircraft aluminum
Weight: 79 g
Color: Silver
