Shop
-
Earmor – Finger Push Button for M51 PTT – M50
€ 11,90 Add to cartEarmor – Finger Push Button for M51 PTT – M50
Small size push button for the Earmor™ M51 PTT model.
It has an extra clip and a velcro strap as well as a 1.2 m cable for easy attachment to a vest, etc.
Plug: threaded mini jack.
Color: black. -
Holosun HS510C MRS Open Reflex Sight, Red Dot – Black
€ 419,00 Add to cartHolosun HS510C MRS Open Reflex Sight, Red Dot – Black
The HS510C Multi Reticle Sight is a top-tier optic from Holosun. Designed for use in the toughest conditions, this open reflex sight for long guns features an additional titanium hood. The electronic control system combined with a powerful LED ensures high performance and stable, long-term operation.
The system is powered by a single 2032 battery, offering up to 50,000 hours of battery life at intensity level six. The sight features an advanced lens system with multilayer anti-reflective coatings, ensuring excellent light transmission. The image through the lens is clear, bright, and parallax-free.
Features:
- Lens: 32 × 24 mm
- Reticle types: Dot with circle / Dot / Circle
- Reticle size: 2 MOA dot, 65 MOA circle
- Light source: LED
- Eye relief: Unlimited
- Adjustment: ½ MOA per click
- Travel range: ±40 MOA from center
- Parallax: ⩽±1 MOA
- Coating: Multilayer
- Magnification: 1×
- Power source: Solar cell, CR2032 battery
- Battery life:
- 50,000 h (dot, medium brightness)
- Mounting rail: Picatinny / Weaver
- Dimensions: 84 × 65 × 40 mm
- Weight: 205 g
- Housing color: Black / Tan
-
Bolle Safety – Safety Goggles – PILOT – Smoke – PILOPSF
€ 20,99 Add to cartBolle Safety – Safety Goggles – PILOT – Smoke – PILOPSF
Bolle Safety PILOT goggles. Their ventilated frame guarantees unequalled adaptability and comfort. Ideal for tactical use in dusty environments.
The ultra-flexible TPV frame guarantees adaptability and matchless comfort, with or without prescription spectacles.
Features:
– Excellent field of vision
– Very flexible PP/TPR frame
– Adjustable strap
– Fits over prescription glasses
– PLATINUM Anti-scratch anti-fog coatingPlatinum® coatings – Bollé Safety revolutionizes eye protection with an innovation that exceeds the requirements of all international standards, especially the EN166 K (resistance to surface damage by fine particles) and N (resistance to fogging) option.
This permanent coating on both sides of the lens gives them a high resistance to scratching (1.4 cd/m²), to the most aggressive chemicals and delays the onset of fogging for 2 minutes. In all circumstances and at all times the PLATINUM lens innovation guarantees your eyes improved protection.
Weight: 89 g
Lenses classification: 1 BT 9 KN
Frame classification: 3 4 9 BT
Optical class: 1
Risks relating to radiations: 5-3.1 EN 172
Standards: EN166 CE -
Bolle – Glasses Case – Polyester – Black – ETUIB
€ 5,90 Add to cartBolle – Glasses Case – Polyester – Black – ETUIB
The Bolle ETUIB case is compatible with Bolle brand glasses. It allows you to carry and store your glasses safely, reducing the risk of crushing or scratching. The case is made of durable polyester with a structure resistant to abrasion and deformation. The rigid walls hold the shape of the case, protecting lenses and frames from pressure and accidental damage.
The interior is lined with soft fabric to prevent scratches, and a Velcro closure allows quick access to the contents. The case is equipped with a snap hook and belt loop, allowing it to be carried on a mount or carry bag. The design is sized to hold most models of Bollé safety glasses.
Features:
- Protective case for storing and transporting safety glasses
- Made of polyester resistant to mechanical abrasion and moisture
- Interior lined with soft lining to protect against scratches
- Velcro closure protects against accidental opening and allows quick access
- Equipped with a belt loop and snap hook
- Compatible with most Bolle safety glasses models
- Rigid construction ensures lens protection during transport
Features: Material Polyester Dimensions 190 x 80 x 75 mm Weight 45 g Color Black -
Bolle Tactical – Ballistic Goggles – Chronosoft II – CHROKADESI
€ 52,90 Read moreBolle Tactical – Ballistic Goggles – Chronosoft II – CHROKADESI
The CHRONOSOFT model is well-known among high-temperature specialists (firefighters). Its TPR frame can withstand extreme heat and its double lens with EQUALIZER technology effectively combats fogging.
Thanks to its large adjustable strap, CHRONOSOFT also offers ample comfort and effective protection from fire or extreme temperatures.
Product pros:
– Panoramic field of vision
– Double ballistic lens
– Anti-scratch and anti-fog coatings
– Comfort foam
– High comfort material frame
– Can be worn over prescription glasses
– Spectacles
– Ventilated frameLens classification: BT 9
Frame classification: 3 4 5 BT 9
Optical quality: 1
Filters: 2C-1, 2 according to EN 170 – UV
Standards: CE EN166
Lens: Clear
Frame: Black
Weight: 142 g -
Target patches – heavy-duty – 22 mm – 2000 pcs – Brown
€ 4,50 Add to cartTarget patches – heavy-duty – 22 mm – 2000 pcs – Brown
22 mm target patches feature a stronger adhesive than standard patches and are made from waterproof material.
The heavy-duty adhesive allows for use in extreme conditions (outdoors, wet and cold weather) without the risk of peeling off.
The larger diameter covers hits more effectively and sticks more securely, preventing patches from coming loose during subsequent shots.
Product details:
- Outer roll diameter: 96 mm
- Inner roll diameter: 26 mm
- Roll width: 25 mm
- Patch diameter: 22 mm
- Quantity per roll: 2000 pcs
- Patch color: Brown / Tan
-
Target Patches – heavy-duty – 22mm – 2,000 pcs – White
€ 4,50 Add to cartTarget Patches – heavy-duty – 22mm – 2,000 pcs – White
These 22mm target patches feature a stronger adhesive than standard patches and are made from waterproof material.
The heavy-duty adhesive allows for use in extreme conditions (outdoors, wet and cold weather) without the risk of peeling off.
The larger diameter covers hits more effectively and sticks more securely, preventing patches from coming loose during subsequent shots.
Product details:
- Outer roll diameter: 96 mm
- Inner roll diameter: 26 mm
- Roll width: 25 mm
- Patch diameter: 22 mm
- Quantity per roll: 2000 pcs
- Sticker color: White
-
Earmor – M32X-MOD4 active hearing protectors – green – M32X-FG(PLUS)
€ 122,90 Read moreEarmor – M32X-MOD4 active hearing protectors – green – M32X-FG(PLUS)
Electronic active hearing protectors with an integrated microphone on a retractable headband. They suppress sounds over 82 dB without interfering with normal conversation. This is made possible by directional microphones placed on both sides of the earcups. They pick up sounds like gunfire or industrial machinery noise and suppress them.
For communication, the user has five volume settings. The Noise Reduction Rating (NRR) is 22 dB. The headset features a NATO-standard TP-120 U-174 plug, allowing connection to Earmor PTT units. The earcups are made of durable, hard polymer designed to withstand rugged use.
Features:
M32X-MOD4 active hearing protectors
Protect hearing from sounds over 82 dB without hindering conversation
Two directional microphones, one on each earcup cover
Noise Reduction Rating 22 dB
TP-120 U-174 connection meets NATO standards
Works well in environments with elevated noise levels
Compatible with M51/M52 PTT sets
Covers made of durable and long-lasting polymer
Includes M16C helmet mount meeting ARC standards
Technical specifications
Noise Reduction Rating (NRR) 22 dB
Noise suppression over 82 dB
Connectivity T -
Earmor – M300T Active Hearing Protectors – IPSC – 23 dB Noise Reduction – Bluetooth 5.4 – Green – M300T-FG
€ 58,90 Add to cartEarmor – M300T Active Hearing Protectors – IPSC – 23 dB Noise Reduction – Bluetooth 5.4 – Black – M300T-BLK
Earmor M300T Bluetooth active hearing protectors are officially licensed by the International Practical Shooting Confederation and approved for IPSC competitions. They suppress impulse noise while maintaining situational awareness of ambient sounds during dynamic shooting.
Earmor M300T are Bluetooth active hearing protectors designed for dynamic shooting, but are also suitable for noisy environments, listening to music, or hands-free phone use.
The Earmor M300T features clear voice tracking technology, improving voice recognition in the wearer’s environment and ensuring better communication quality.
They also feature Bluetooth 5.4 connectivity for music playback and call management.The headphones have two operating modes – with and without Bluetooth. The first allows phone connection, audio playback, and conversation, while the second transmits ambient sounds in three scenarios. They effectively reduce noise above 82 dB.
These hearing protectors are perfect for noisy environments such as shooting ranges, construction sites, and production halls.
Pressing the MFB button connects the protectors to a mobile device via Bluetooth 5.4; holding the MFB button for 2 seconds allows you to choose between three different modes.
Three ambient sound modes:
Ambient mode: Max amplification of quiet ambient sounds. Stay aware of your surroundings by improving situational awareness;
Clear voice: Optimizes conversation clarity, ensuring seamless communication. More effective in noisy environments;
Focus mode: Ambient sound amplification is turned off, only noise reduction is active, making it ideal for focused activities.Additionally, the ambient sound volume can be adjusted smoothly using the power and volume knob.
Earmor M300T active hearing protectors provide effective noise suppression at NRR 23 dB. They suppress impulse noise while maintaining situational awareness during dynamic shooting. They feature an adjustable, flexible headband made of a special composite material that is non-slip and ensures comfort during prolonged wear. Additionally, the protectors are equipped with Bluetooth 5.4 for wireless connectivity with mobile devices.
These active earmuffs feature a foldable design and are IPX5 compliant. They are powered by 2 AAA batteries and come equipped with comfortable gel pads.
https://youtu.be/_mVfwMrkeyk
-
Earmor – M300T Active Hearing Protectors – IPSC – NRR 23 dB – Bluetooth 5.4 – Black – M300T-BLK
€ 58,90 Add to cartEarmor – M300T Active Hearing Protectors – IPSC – NRR 23 dB – Bluetooth 5.4 – Black – M300T-BLK
Earmor M300T Bluetooth active hearing protectors are officially licensed by the International Practical Shooting Confederation and approved for IPSC competitions. They suppress impulse noise while maintaining situational awareness of ambient sounds during dynamic shooting.
Earmor M300T are Bluetooth active hearing protectors designed for dynamic shooting, but are also suitable for noisy environments, listening to music, or hands-free phone use.
The Earmor M300T features clear voice tracking technology, improving voice recognition in the wearer’s environment and ensuring better communication quality.
They also feature Bluetooth 5.4 connectivity for music playback and call management.The headphones have two operating modes – with and without Bluetooth. The first allows phone connection, audio playback, and conversation, while the second transmits ambient sounds in three scenarios. They effectively reduce noise above 82 dB.
These hearing protectors are perfect for noisy environments such as shooting ranges, construction sites, and production halls.
Pressing the MFB button connects the protectors to a mobile device via Bluetooth 5.4; holding the MFB button for 2 seconds allows you to choose between three different modes.
Three ambient sound modes:
Ambient mode: Max amplification of quiet ambient sounds. Stay aware of your surroundings by improving situational awareness;
Clear voice: Optimizes conversation clarity, ensuring seamless communication. More effective in noisy environments;
Focus mode: Ambient sound amplification is turned off, only noise reduction is active, making it ideal for focused activities.Additionally, the ambient sound volume can be adjusted smoothly using the power and volume knob.
Earmor M300T active hearing protectors provide effective noise reduction at NRR 23 dB. They feature a flexible, adjustable headband made of a special composite material that is non-slip and ensures extra comfort during prolonged wear.
These active hearing protectors feature a foldable design and meet the IPX5 standard. They operate on 2 AAA batteries and are equipped with comfortable gel pads.
https://youtu.be/_mVfwMrkeyk
-
Holosun – HE510C-GR Elite Reflex Sight – Solar Panel – Green Dot
€ 455,00 Add to cartHolosun – HE510C-GR Elite Reflex Sight – Solar Panel – Green Dot
The Holosun HE510C-GR Elite is an open reflex sight featuring three reticle options: a classic 2 MOA dot, a 65 MOA circle, and a combination of both. The sight is equipped with an advanced lens system with multiple anti-reflective coatings to ensure a clear and bright image. For additional power, it features a built-in solar cell and a green aiming point.
Features:
- Objective lens 32 x 24 mm
- Reticles: Circle-dot, dot, circle
- Dot size: 2 MOA dot, 65 MOA circle
- Light source: LED
- Eye relief: Unlimited
- Adjustment: 1/2 MOA / click
- Travel range: ±40 MOA from center
- Parallax: ±1 MOA
- Coatings: Multi-layer
- Magnification: 1X
- Power source: Solar cell and CR2032 battery
- Battery life: 50,000 h (dot, medium brightness), 20,000 h (dot and circle, medium brightness)
- Operating modes: Auto and manual
- Auto-off: After 10 minutes of inactivity
- Brightness settings: 10 DL + 2 NV compatible
- Housing: T6061-T6 aluminum, titanium hood
- Housing finish: MAO (Micro-arc oxidation)
- Mount: QD lever
- Housing color: Black
- Buttons: Two low-profile rubber buttons on the side
- Battery: Secured in a tray with two screws
- Mounting rail: Picatinny / Weaver
- Water resistance: IP67
- Operating temperature: -10 °C to 50 °C
- Storage temperature: -40 °C to 70 °C
- Vibration resistance: Up to 1000 G
- Dimensions: 84 x 65 x 40 mm
- Weight: 205 g
Included:
HE510C-GR Elite Green Dot
Spare battery tray (with screws)
CR2032 battery
Torx key
Adjustment tool -
Earmor hard shell headset carrying case, black S16-BK
€ 24,40 Add to cartEarmor hard shell headset carrying case, black S16-BK
A hard shell headset carrying case from Earmor for active hearing protection, passive, and standard headphones. The dimensions allow for comfortable storage of folded headsets with a rigid headband. An additional feature of the S16A is an extra compartment for glasses or small tools. The user also has a zippered mesh pocket and an open pocket.
The case is made of nylon, with internal compartments serving as additional reinforcement and the opposite wall lined with microfiber. It features a two-way zipper with a rubber handle bearing the manufacturer’s logo. A Velcro panel on the front allows for personalization with patches, including the included manufacturer’s patch. The entire case features a nylon carrying handle, further reinforced with polymer.
Features:
- Hard shell case for hearing protection and headsets
- Fits headsets with a rigid headband
- Includes extra compartment for glasses, separate open pocket, and mesh organizer
- Made of nylon with multiple internal reinforcements
- Closed with a two-way zipper
- Microfiber-lined panel for better cushioning
- Comfortable polymer-reinforced carrying handle
- Velcro panel on the front
- Includes manufacturer’s patch
- Material: Nylon
- External dimensions: 22 x 18 x 11.5 cm
- Internal dimensions: 21 x 16.5 x 11 cm
- Velcro compartment dimensions: 9.5 x 5.5 cm
- Weight: 384 g
-
Earmor MaxDefense Silicone Earplugs M04 100pcs
€ 43,50 Add to cartEarmor MaxDefense Silicone Earplugs M04 100pcs
Earmor™ MaxDefense silicone earplugs feature a triple-flange design for high comfort and a noise reduction rating (NRR) of 23 dB.
Their pre-molded silicone construction is especially useful when dirty hands prevent the rolling and shaping required for standard foam plugs.
This model includes a vinyl cord for wearing the earplugs around the neck.
Features:
– Unique, patented triple-flange design
– Made of soft and durable material
– One size fits most ears
– Reusable
– No rolling required
– Flexible cord included- Noise reduction: 23 dB
- Material: Silicone
- Color: Orange/Blue
- Total length: 32 mm
- Flange length: 16 mm
- Set of 100pcs
- Complies with CE/RoSH/ANSI 3.17-1976/AS-NZS standards
-
Earmor S08 Belt Clip for Headsets
€ 8,50 Add to cartEarmor S08 Belt Clip for Headsets
Durable polymer holder for Earmor headsets.
The belt clip is designed for Earmor products.
The clip is used to secure headsets to a belt when not in use.
Universal belt loop allows for use with most belts. -
Earmor MaxDefense Silicone Earplugs M04
€ 0,60 Add to cartEarmor MaxDefense Silicone Earplugs M04
Earmor™ MaxDefense silicone earplugs.
Their pre-molded silicone construction is especially useful when dirty hands prevent the rolling and shaping required for standard foam plugs.
This model includes a vinyl cord for wearing the earplugs around the neck.
Features:
– Unique, patented triple-flange design
– Made of soft and durable material
– One size fits most ears
– Reusable
– No rolling required
– Flexible cord includedNoise Reduction Rating: 23 dB
Material: Silicone
Color: Orange/Blue
Total length: 32 mm
Flange length: 16 mm
Complies with CE/RoSH/ANSI 3.17-1976/AS-NZS standards -
Vector Optics – Gun Rest Saddle Mount for Shooting Tripod
€ 43,90 Add to cartVector Optics – Gun Rest Saddle Mount for Tripod – Aluminum – RSGR-14
The saddle mount provides stable support for the firearm receiver or stock on a shooting tripod. The aluminum construction ensures system rigidity, and the adjustable width of the saddle clamp allows for alignment with different firearm axes while ensuring even pressure.
The top surface is lined with a non-slip rubber layer to ensure greater stability during use. The mount uses 1/4″-20 and 3/8″-16 threads and a 1/4″ latch adapter, allowing it to work with many tripod models.
Features:
- Aluminum shooting tripod mount for stable firearm support
- Adjustable width clamp fits various stock sizes
- Knob allows for quick mounting without tools
- Includes threaded adapters for compatibility with various tripod heads
- Contoured mounting surfaces increase firearm stability in the saddle
- The saddle clamp is rubber-lined to protect against scratches
- Clamp range 35–65 mm
- 1/4″-20 and 3/8″-16 threads
- 1/4″ latch adapter
- Dimensions 86 x 90 x 59 mm
- Weight 435 g
- Color: Black
-
Vector Optics – Picatinny 45° Mount for Pistol Red Dot Sights
€ 28,90 Read moreVector Optics – Picatinny 45° Mount for Pistol Red Dot Sights – Black – SCFRM-29
Universal offset mount for pistol red dot sights by Vector Optics. Designed for mounting a secondary sight at a 45° angle on an AR Picatinny rail. It is primarily compatible with the Vector Optics Frenzy series, as well as sights following the MGT/MOJ/TEK/GIN footprint standards. It is made of 7075-T6 aluminum with an anodized finish.
The 45° offset allows for a quick transition from the primary optic to a backup red dot sight. Additionally, the 45° configuration enables intuitive weapon canting without compromising ergonomics in dynamic situations.
Features:
- Universal Picatinny rail mount for pistol red dot sights
- Compatible with MGT/MOJ/TEK/GIN standards
- 45° offset angle
- Enables quick transition from primary to secondary sight
- Made of 7075-T6 aluminum
- Anodized finish
- Dimensions 59 x 52 x 24 mm
- Mount base dimensions 52 x 28 mm
- Weight 36 g
- Color: Black
-
Earmor M20T Pro Active Earbuds – Bluetooth – 30 dB
€ 95,00 Add to cartEarmor M20T Pro Active Earbuds – Bluetooth – 30 dB
Earmor M20T Pro are active earbuds designed for dynamic shooting, but also suitable for noisy environments or, for example, listening to music and hands-free phone use.
Earmor M20T Pro active hearing protectors are upgraded with new features compared to the base M20T model. They feature Clear Voice Tracking technology, which improves voice recognition in the wearer’s environment and ensures better communication quality. They also feature Bluetooth 5.4 connectivity for music playback and call management.
Designed as lightweight electronic earbuds, the device features two operating modes: with and without Bluetooth. The first allows for audio playback and conversation, while the second transmits ambient sounds in three scenarios. They effectively reduce noise over 82 dB, with a noise response time of 1 millisecond.
The M20T Pro earbuds have a Noise Reduction Rating (NRR) of 30 dB. This is achieved through various sizes of eartips that fit snugly in the ear canal. These hearing protectors are perfect for noisy environments like shooting ranges, construction sites, and production halls. The electronic system automatically turns off the device after two hours of inactivity to save battery.
Three ambient sound modes:
- Ambient mode: Max amplification of quiet ambient sounds. Stay aware of your surroundings by improving situational awareness;
- Clear voice: Optimizes conversation clarity, ensuring seamless communication. More effective in noisy environments;
- Silent mode: Ambient sound amplification turned off, only noise reduction active; ideal for focused work or meditation.
Includes two types of interchangeable eartips in various sizes (S, M, L):
- classic foam tips that need to be rolled up beforehand;
- pre-molded triple-flange silicone “tree” tips that require no shaping.
Features:
Noise Reduction Rating (NRR) 30 dB
Active noise suppression over 82 dB
Bluetooth version 5.4
Speaker diameter 10 mm
Speaker power 3 mW
Speaker impedance 16 ohms
Headset microphone Omnidirectional
Earbud battery capacity 2 x 65 mAh
Charging case battery capacity 500 mAh
Working time up to 10 hours
Protection class IPX4
Charging port on case USB-C
Charging case dimensions 85 x 53 x 40 mm
Earplug dimensions 29 × 23 × 34 mm
Charging case weight 66 g
Single earbud weight 7 g
Color Blackhttps://youtu.be/kVPm-do9agM
-
Bravo Concealment IWB Belt Clips for DOS Holsters
€ 29,50 Add to cartBravo Concealment IWB Belt Clips for DOS Holsters
Polymer belt clips for Bravo Concealment Torsion/DOS holsters. These allow users to lower the overall profile of their IWB holster or convert an OWB holster to IWB. Installation is relatively simple, and the manufacturer has included the necessary screws and rubber washers.
Features:
- Belt clips for Torsion/DOS holsters
- Low-profile polymer holster mounting hardware
- Lightweight yet highly durable
- Allows for a lower profile on IWB holsters
- Allows converting OWB holsters to IWB
- Screws and rubber washers included
-
Bravo Concealment OWB Holster – Sig Sauer P320 Full
€ 39,50 Add to cartBravo Concealment OWB Holster – Sig Sauer P320 Full, Right-Handed
Red dot compatible. Friction-fit holster with smooth adjustment.
Fits:
Sig Sauer P320 Full;
P320 M17 9/40;
P320 RXP 9/40;
P320 RXP X-Full Size 9/40;
P320 X-VTAC Full Size 9/40;
P320 Compact/Carry 9/40;
CZ Shadow 2
Can be converted to an IWB holster with separate belt clips.
Features:
- Friction-fit holster, safer than thumb-break holsters
- Durable polymer construction
- Custom-molded fit prevents rattling
- Adjustable retention screws
- 10° forward cant for discreet carry
- Smooth interior prevents firearm scratching
- Two 40 mm belt loops
- Right-handed version
- Interchangeable clips (sold separately) convert it to an IWB holster
- Red dot sight compatible
-
Fenix GL06 365 Tactical Pistol Light, Sig Sauer
€ 85,00 Add to cartFenix GL06 365 Tactical Pistol Light, Sig Sauer
Small and compact pistol light with quick-release. Fits many Sig Sauer models or pistols with a similar rail.
The Fenix GL06 365 tactical flashlight is designed for Sig Sauer pistols or firearms with a similar mounting rail. Made of durable aluminum. Features a CREE XPL LED with 600 lm output and 140 m range. Powered by a CR123A battery or rechargeable battery. QD mount.
The front battery compartment allows for the use of an ARB-L16-700UP rechargeable battery or a standard CR123A battery; using the rechargeable battery achieves the highest output. The device operates in two modes: standard and strobe.
The ambidextrous design allows for both right- and left-handed use. For proper installation on full-size pistols, the distance from the trigger guard to the furthest rail slot should be at least 43 mm. It is also compatible with select compact pistols. Its small size allows the weapon to be carried in appropriately fitted holsters.
Features:
Light source CREE XP-L HI LED
Maximum output 600 lumens
Intensity 4880 cd
Maximum runtime up to 1.5 hours
Mounting Sig Sauer rail (1913)
Maximum range up to 140 meters
LED lifespan 50,000 hours
Power source ARB-L16-700UP rechargeable battery or CR123A battery
Number of modes 2
Material Aluminum 6061-T6
Protection class IPX7
Length 61 mm
Body diameter 28 mm
Weight 69 g
Color BlackIncluded:
Fenix flashlight
Fenix ARB-L16-700UP rechargeable battery pack
Micro-USB cable
Spare O-ringhttps://youtu.be/79waQsoB50g
-
Fenix GL06 Tactical Pistol Light, Picatinny
€ 89,00 Add to cartFenix GL06 Tactical Pistol Light, Picatinny
Small and compact, quick-release pistol light. Fits many pistol models such as Glock and CZ (not compatible with Sig Sauer rails).
The Fenix GL06 tactical flashlight is designed for pistols equipped with Glock/CZ or Picatinny standard accessory rails. The flashlight body is made of 6061-T6 aluminum with a HAIII hard-anodized finish for increased durability. The light source is a CREE XP-L HI LED with a maximum output of 600 lm and a lifespan of up to 50,000 hours. It has a maximum beam distance of 140 meters and a runtime of up to 1.5 hours.
Features:
Light source CREE XP-L HI LED
Maximum output 600 lumens
Intensity 4880 cd
Maximum runtime up to 1.5 hours
Mounting Glock/CZ Picatinny
Maximum range up to 140 meters
LED lifespan 50,000 hours
Power source ARB-L16-700UP rechargeable battery or CR123A battery
Number of modes 2
Material Aluminum 6061-T6
Protection class IPX7
Length 61 mm
Body diameter 28 mm
Weight 69 g
Color BlackIncluded:
Fenix flashlight
Fenix ARB-L16-700UP rechargeable battery pack
Micro-USB cable
Spare O-ring
Glock rail key
Picatinny keyhttps://youtu.be/79waQsoB50g
-
RifleCX Clear Shot, Optics Cleaner + Cleaning Cloth 100 ml
€ 13,50 Add to cartRifleCX Clear Shot, Optics Cleaner + Cleaning Cloth 100 ml
RifleCX Clear Shot is a specialized cleaner for optics, sights, ballistic goggles, and even standard surfaces. The product effectively removes all dirt and prevents surface fogging. The formula is based on surfactants and silicone fluids. It is alcohol-free, making it safe for use on both glass and polymer surfaces.
The dispenser is equipped with a spray nozzle, ensuring even coverage with every press. The 100 ml capacity ensures long-lasting use even with intensive application. The cleaner comes with a 14.5 x 12 cm microfiber cloth featuring a printed RifleCX motif.
NOTE: The cleaner contains coumarin.
Features:
- Alcohol-free cleaning formula
- Safe for cleaning both glass and polymers
- Effectively removes dirt and prevents fogging
- Spray container
- Spray nozzle ensures even surface coverage
- Push-button closure protects against accidental dispensing
- Printed microfiber cloth included
-
Vector Optics – Spotting Scope Liberty 20-60×60 – Angled – Black – SCSS-01
€ 146,90 Add to cartVector Optics – Spotting Scope Liberty 20-60×60 – Angled – Black – SCSS-01
Inclined observation telescope with variable magnification 20-60×60. Porro / BAK-4 lenses. The zoom is adjusted with the ring next to the eyecup, and the focus with the knob on the right side of the telescope. Housing made of ABS plastic with a rubber cover. The telescope has a mounting plate for the tripod included in the set. The tripod has a ring for height adjustment.
Features:
- Durable ABS plastic, rubber coated
- High 20–60x magnification
- High-quality prisms ensure excellent light transmission
- Porro / BAK-4 lens construction provides a clear and sharp image.
- Vertical tripod adjustment
- Anti-reflective tripod finish
- Tripod mounting plate
- Button compass on the inside of the lens cover
Technical data:
Zoom: 20–60x
Objective lens diameter: 60 mm
Field of view: 33.3–16.7 m @ 1000 m
Min. focus distance: 7 m
Length: 350 mm
Color: black
Weight: 730 g
-
Vector Optics – Frenzy & Sphinx Mount Base for HK USP
€ 30,90 Add to cartVector Optics – Frenzy & Sphinx Mount Base for HK USP SCRDM-07
A red dot sight mounting plate made entirely of aluminum. Replaces the original rear sight on HK USP pistols.
Features:
- Designed for specific mini red dot sights, such as the SCRA-10A Sphinx and Frenzy series.
- For use on firearms.
- Designed for HK USP pistols.
- Two mounting screws included.
- Full metal construction.
Technical data:
Distance between pins: 40 x 20 mm
Lenght: 46,1 mm
Thickness: 3 mm
Color: black
Weight: 12 g
-
Earmor M300X Active Hearing Protection – IPSC Licensed – Yellow
€ 49,90 Add to cartEarmor M300X Active Hearing Protection – IPSC Licensed – Yellow
Earmor M300X active earmuffs are officially licensed by the International Practical Shooting Confederation and approved for use in IPSC competitions. They suppress impulse noise while maintaining situational awareness during dynamic shooting.
The earmuffs use an electronic system that reduces sudden noise impulses over 82 dB while amplifying low-level sounds such as speech and environmental signals. This mechanism ensures safe participation in IPSC matches. Four directional microphones capture ambient sound and transmit it to the user’s ear in a controlled manner.
Volume can be adjusted using a button on the left ear cup. This allows you to quickly adjust the amplification level to your needs depending on the prevailing conditions. The earmuffs are attached to an adjustable headband, allowing them to adapt to your head shape and remain stable during movement.
Powered by replaceable AAA batteries, they can be swapped quickly without needing a recharge. The slim profile allows for comfortable shooting with long guns. Gel pads make the protectors more effective at noise reduction and more comfortable, which is essential in competitions where long-term wear is mandatory. This also makes wearing the earmuffs with shooting glasses more comfortable.
Features:
- Protection type: Active
- Noise reduction (SNR): 30 dB
- Noise reduction (NRR): 24 dB
- Standard: EN 532
- Number of microphones: 4
- Audio input: 3.5 mm jack
- Power: 2 x AAA batteries
- Weight: 360 g
- Color: Yellow
-
Earmor M300X Active Hearing Protectors – IPSC Licensed – Green
€ 49,90 Add to cartEarmor M300X Active Hearing Protectors – IPSC Licensed – Green
Earmor M300X active earmuffs are officially licensed by the International Practical Shooting Confederation and approved for use in IPSC competitions. They suppress impulse noise while maintaining situational awareness during dynamic shooting.
The earmuffs use an electronic system that reduces sudden noise impulses over 82 dB while amplifying low-level sounds such as speech and environmental signals. This mechanism ensures safe participation in IPSC matches. Four directional microphones capture ambient sound and transmit it to the user’s ear in a controlled manner.
Volume can be adjusted using a button on the left ear cup. This allows you to quickly adjust the amplification level to your needs depending on the prevailing conditions. The earmuffs are attached to an adjustable headband, allowing them to adapt to your head shape and remain stable during movement.
Powered by replaceable AAA batteries, they can be swapped quickly without needing a recharge. The slim profile allows for comfortable shooting with long guns. Gel pads make the protectors more effective at noise reduction and more comfortable, which is essential in competitions where long-term wear is mandatory. This also makes wearing the earmuffs with shooting glasses more comfortable.
Features:
- Protection type: Active
- Noise reduction (SNR): 30 dB
- Noise reduction (NRR): 24 dB
- Standard: EN 532
- Number of microphones: 4
- Audio input: 3.5 mm jack
- Power: 2 x AAA batteries
- Weight: 360 g
- Color: Green
-
Vector Optics – Frenzy 1x22x26 MOS punapunktsihik – Picatinny
€ 169,90 Add to cartVector Optics – Frenzy 1x22x26 MOS red dot
SCRD-36
Lightweight open type red dot sight with 3 MOA dot. The sight has 8 levels suitable for daylight and 2 modes suitable for use with night vision devices. A Picatinny rail mount is included.
Powered red dot sight made of 6061-T6 aluminum and powered by a single CR2032 battery. The waterproof unit is equipped with an auto shut-off feature to extend battery life.
Note: Product comes with a lifetime T-VIP manufacturer warranty.
Features:
- Sturdy 6061-T6 aluminum construction
- 3 MOA dot size
- Large viewfinder measuring 22 x 26 mm
- 10 aiming dot brightness levels – 8 for daylight and 2 for night vision
- Until 20,000 hr operation on one CR2032 battery in daylight mode on the setting with the weakest dot
- Low profile
- Ultralight weighing
- Weaver mount
- Waterproof standard IP67
- The device has a motion sensor with an automatic auto-off function after 2 minutes of inactivity
Included:
Red Dot Sight
Picatinny mount
Allen wrenches
Warranty card
Rubber sight cover
Cleaning cloth -
Vector Optics – Riflescope Constantine 1-8×24 – 30 mm – FFP
€ 319,00 Add to cartVector Optics – Riflescope Constantine 1-8×24 – 30 mm – FFP
FFP – SCFF-32
The Constantine 1-8×24 30 mm FFP riflescope offers a magnification of 1-8x and allows both open-eye aiming with both eyes open in the absence of magnification and accurate shooting at further distances. The 24 mm objective lens with FMC-coated lenses provides good light transmission and clear contrast and clarity. The scope’s small size does not interfere with carrying a weapon with optics in a tactical bag.
The field of view is 35.78-4.54 meters at 100 meters, and the eye relief of 90 mm allows comfortable aiming. The VOF-EHT sighting reticle with LED illumination offers 11 levels of intensity, allowing you to adjust it to the lighting conditions. The 100m parallax adjustment minimizes errors when shooting at medium distances.
The vertical and horizontal adjustment range is 35 MIL, with a 1/10 MIL clique value for accurate sight alignment. The 30mm diameter tube is made of anodized 6061-T6 aluminum. The design is shockproof to 1,000 G, IPX6 waterproof and nitrogen-filled to prevent lens evaporation. The scope comes with a Weaver mount and lens caps. Power is provided by a CR2032 battery.
Features:
- VOF-EHT reticle rifle scope with FFP layout
- Magnification of 1-8x allows fast targeting at medium distances
- 24mm objective lens provides good light transmission in a compact size
- Multi-coated lenses improve contrast and image clarity
- Field of view 35.78-4.54 m at 100 m
- Eye relief distance of 90 mm for comfortable aiming
- Illumination of the targeting reticle at 11 intensity levels
- 100m parallax adjustment minimizes errors when shooting at medium distances
- Vertical and horizontal adjustment range of 35 MIL
- 1/10 MIL click value allows for accurate sight alignment
- Shock-resistant design up to 1000 G, made of anodized 6061-T6 aluminum
- Waterproof to IPX6 rating
- Nitrogen filling to prevent lens fogging
- Weaver mount and lens caps included
- Powered by a CR2032 battery
-
Vector Optics – Red Dot Pistol Mount Base for Glock – SCRDM-01
€ 28,90 Add to cartVector Optics – Red Dot Pistol Mount Base for Glock – SCRDM-01
SCRDM‑01
Mounting plate for reflex sight made entirely of aluminum. Mounted in the place of the original rear sight in Glock type handguns.
Features:
- Made for specific mini red dot sights such as the SCRA-10A Sphinx and Frenzy series.
- For use on firearms.
- Designed for Glock pistols.
- Two mounting screws included.
- Made entirely of metal.
Features:
-
- Distance between poles: 40 x 20 mm
- Lenght: 46,1 mm
- Thickness: 3 mm
- Material: alumiinium
- Color: black
- Weight: 12 g
-
Smith & Wesson – Border Guard – SWBG1
€ 41,65 Add to cartSmith & Wesson – Border Guard – SWBG1
Folding knife with a safe Locking ropes and belts, and striker for the window.
Blade opens with a thumb stud on both sides, and locked steel blockade linerlock. Linings made of aluminum handles with non-slip fills in the black.
Removable metal clip, the ability to mount a knife on a belt, pocket edge.
Steel: 420
Blade Lenght: 112 mm
Blade thickness: 3,5 mm
Overall length: 251 mm
Weight: 252 g
-
RifleCX – Care Spray – Teflon – 200 ml
€ 9,80 Add to cartRifleCX – Care Spray – Teflon – 200 ml
Care spray preservative and repair preparation with DuPont Teflon. The main advantage of this product is its dedicated use for the maintenance of weapons and other surfaces. It is suitable for both metal and polymers. It creates a low-friction film and shines surfaces. It has conical and narrow tube nozzles. Thanks to the use of original DuPont Teflon, the formulation ensures quality at a high level.
The preservative-repair formula can also be used to clean other things such as long windcheaters, things or equipment in the workshop. The 500 ml can will last for a long time, so the user does not have to worry about sudden exhaustion of the product. It provides protection against abrasion, UV, aggressive chemicals, and is non-toxic and physiologically inert.
The product protects the coated surface from the adhesion of dirt and other deposits, further preventing deposition and the formation of new compounds. In addition, the agent has deep penetrating properties, which means that it will thoroughly cover the surface with which it comes into contact. The Teflon it contains facilitates replacement and heat protection, which translates into a longer life for parts coated with Care Spray.
Technical data
Capacity: 200 ml
Lubricant: Teflon
Height: 192 mm
Diameter: 52 mm
Tube length: 101 mm -
RifleCX – Gun Cleaner – 200 ml
€ 8,50 Add to cartRifleCX – Gun Cleaner – 200 ml
RifleCX – Gun Cleaner Dedicated gun cleaner for firearms. Designed to simplify and shorten the gun cleaning process. The gun cleaner with a special composition is released under high pressure so it will effectively remove dirt, carbon build-up, deposits of lead, copper, nickel, as well as oil and grease without the need to use a brush. Included with the cleaner is a tube that allows you to accumulate the stream, increasing its pressure and thus its effectiveness.
The cleaner evaporates quickly leaving a dry and clean surface. For further maintenance, you can use RifleCX 48306 maintenance and repair product or RifleCX 48308 gun oil. Gun cleaner does not damage plastic or wooden parts. It does not contain chlorinated solvents, which means it is safe for cleaning weapons, as well as, for example, long guns, ASG replicas and others.Capacity: 200 ml -
RifleCX – Care Spray – Teflon – 500 ml
€ 13,80 Add to cartRifleCX – Care Spray – Teflon – 500 ml
Care spray preservative and repair preparation with DuPont Teflon. The main advantage of this product is its dedicated use for the maintenance of weapons and other surfaces. It is suitable for both metal and polymers. It creates a low-friction film and shines surfaces. It has conical and narrow tube nozzles. Thanks to the use of original DuPont Teflon, the formulation ensures quality at a high level.
The preservative-repair formula can also be used to clean other things such as long windcheaters, things or equipment in the workshop. The 500 ml can will last for a long time, so the user does not have to worry about sudden exhaustion of the product. It provides protection against abrasion, UV, aggressive chemicals, and is non-toxic and physiologically inert.
The product protects the coated surface from the adhesion of dirt and other deposits, further preventing deposition and the formation of new compounds. In addition, the agent has deep penetrating properties, which means that it will thoroughly cover the surface with which it comes into contact. The Teflon it contains facilitates replacement and heat protection, which translates into a longer life for parts coated with Care Spray.
Technical data
Capacity: 500 ml
Lubricant: Teflon
Height: 233 mm
Diameter: 66 mm
Tube length: 113 mm -
Vector Optics – Mounting Adapter for CZ Shadow/Shadow 2/SP-01/P-10C – Black – SCFRM-21
€ 33,90 Add to cartVector Optics – Mounting Adapter for CZ Shadow/Shadow 2/SP-01/P-10C – Black – SCFRM-21
A universal plate for mounting collimators to the Frenzy-X series pistol and MGT/MOJ/TEK/GIN standard from Vector Optics. A series of marked holes along with instructions allow you to easily identify the mounting point for your collimator. It is made of milled 7075-T6 aluminum alloy with an anodized surface.
Technical data Compatibility CZ Shadow 2 Compact®
CZ Shadow 2 Standard®
CZ Shadow 2 Optics Ready Compact®
CZ Shadow 2 Optics Ready Standard®
CZ 75 Shadow®
CZ 75 SP-01®
CZ P-10 C®Mounting Frenzy-X
MGT
MOJ
TEK
GINMounting plate dimensions 52 x 28 mm Material Aluminum 7075-T6 Weight 12 g Color Black -
Vector Optics – Extreme High AR Scope Mount 30 mm – Picatinny – Black
€ 39,90 Add to cartVector Optics – Extreme High AR Scope Mount 30 mm – Picatinny – Black
A one-piece scope mount with a 30mm tube, primarily for the AR platform from Vector Optics. Its elongated design allows to increase the distance of the eye from the scope’s eyepiece. The execution of the mount’s body from milled 6061-T6 aluminum has preserved high rigidity, which is crucial when withstanding the loads generated when the weapon is fired.
Features:
- One-piece scope mount that raises the aiming line by 50 mm
- Picatinny standard mount, based on two strikers
- CNC machined from 6061-T6 aluminum alloy
- Extended design allows for increased eye relief
- Compatible with 30mm diameter tubes
- Each mounting ring has been secured with four screws
- Construction bolted with Torx T15 screws
Technical data Tube diameter 30 mm Height of the aiming line 50 mm
1,97″Mounting Picatinny Ring spacing 73 mm Spacing between mounting lugs 50 mm Mounting screws Torx T15 Screw tightening torque 2 to 2.4 Nm Dimensions 140 x 72 x 45 mm Material Aluminum 6061-T6 Weight 161 g Color Black -
Holosun – Protection Cap – 507C
€ 8,50 Add to cartHolosun – Protection Cap – 507C
Polymer cover for Holosun 507C collimators. Protects the weapon-mounted collimator during transport without removing it and losing zeroing. Protects against mechanical damage, dirt, rain and accidental activation. Being made of lightweight and durable polymer, it does not significantly affect the weight of the weapon.
Features:
- Cover for collimator sight
- Allows you to protect the collimator from moisture and damage
- Made of lightweight, durable polymer
- Fitted design to prevent slipping during transport
- Designed for Holosun 507C collimators
-
Earmor – Replacement Ear Muffs for M31 PLUS and M32 PLUS
€ 13,90 Add to cartEarmor – Replacement Ear Muffs for M31 PLUS and M32 PLUS
Replacement sponges for Earmor’s M31 PLUS or M32 PLUS passive hearing protectors. They ensure comfortable wearing even for many hours and high noise suppression efficiency. Made of high-quality PVC, the sponges ensure a good fit to the shape of the head, which is important for both comfort and safety of the user. The airtightness of the ear protectors is important both at the shooting range and in high noise working environments.
Features:
- Replacement sponges designed for M31 PLUS and M32 PLUS Earmor ear protectors
- Seal the ear protectors without having to replace the entire headphones
- Made of PVC and soft foam for comfortable wear
- Quick installation without tools
- Improve hygiene of use and extend the life of the ear protectors
- Dimensions 86 x 105 x 20 mm
-
RifleCX Longterm Protector maintenance oil, long-term protection 500 ml
€ 14,50 Add to cartRifleCX Longterm Protector firearm maintenance oil, long-term protection 500 ml
RifleCX Longterm Protector maintenance oil provides long-term protection. The main advantage of this product is its specialized use for the long-term maintenance of firearms and other surfaces. Suitable for both metal and polymers. Forms a low-friction protective film that prevents corrosion. Includes a conical and a narrow nozzle for application via tube.
It is significantly more effective than traditional oils – it is a long-term corrosion protection and firearm maintenance product created specifically for shooters. Its advanced formula creates an ultra-thin and soft anti-corrosion film that effectively repels water even from hard-to-reach places, providing protection for up to 14 months.
Use Longterm Protector and sleep soundly – no rust will form on your firearm.
Application
Apply Longterm Protector to all parts of the firearm according to the instructions in the video above. If desired, you can wipe the firearm gently or place it in the safe while wet for better protection.Features:
- Provides long-term protection with Teflon
- Specialized firearm preservative
- Perfect for long-term storage of equipment
- Suitable for metals and polymers
- Forms a low-friction film
- Protects surfaces from corrosion
- Two nozzles – conical and narrow
- Protects surfaces from dirt and corrosion
- Works in any position
- Large aerosol bottle – 500 ml, weight 433 g
-
UTG – Bungee Sling QD Gun Sling – 1-Point – Black
€ 43,90 Add to cartUTG – Bungee Sling QD Gun Sling – 1-Point – Black
The Bungee Sling QD is a functional tactical accessory that significantly increases the user’s comfort when carrying a weapon. The flexible bungee design translates into comfortable carrying of the weapon, reducing the load on the shoulders and back, and allows the user to quickly fold up to fire.
The sling is made from a combination of heavy-duty nylon webbing and an elastic insert, which guarantees its durability and resistance to damage. The QD system allows instant installation and removal with one hand, even with tactical gloves. The ability to adjust the length of the suspension in the range of 107-147 cm allows for quick adjustment to the user’s height and physique.
Features:
- Single-point tactical suspension
- Made of nylon webbing and elastomeric material
- Flexible bungee type design
- Mounting with QD
- Adjustable in length, 107-147 cm
- Color black
- Weight 226 g
-
RifleCX – Barrel Foam – 500 ml
€ 24,50 Add to cartRifleCX – Barrel Foam – 500 ml
Barrel cleaning foam from RifleCX, with it you can quickly and efficiently clean the barrel. Thanks to its composition, the foam effectively softens and loosens baked-on dirt, carbon build-up and residues of lead, nickel, as well as copper. At the same time, it remains safe for the barrel furrows, without damaging them. The foam can be introduced using a polymer tube with a length of 60 centimeters.
The foam from RifleCX maintains its density for a much longer period of time, so it does not flow out of the barrel and works longer in contact with contaminants. After applying the foam, all you have to do is wait 10 minutes and wipe it with a ramrod and then with a wipe. It can also be successfully used to clean weapons, as well as long guns, for example.
Features:
- Barrel cleaning foam
- Maintains density for a longer period of time
- Effectively softens and loosens baked-on dirt and carbon build-up
- Safe for barrel grooves
- 60 cm long polymer tube
- Makes barrel cleaning easier and faster
-
RifleCX – Silencer Cleaner CX80 – 600 ml
€ 15,99 Add to cartRifleCX – Silencer Cleaner CX80 – 600 ml
Silencer Cleaner CX80 from RifleCX is a specialized agent designed for cleaning shooting suppressors. It provides fast and effective removal of gunpowder deposits, carbon build-up and other contaminants, restoring full functionality to the suppressor. The product is safe for metal and does not cause corrosion.
It can be used for both strippable and non-strippable silencers. The product is recommended for steel mufflers, with aluminum mufflers oxidation damage may occur. It can also be successfully used to clean weapons, as well as long guns, for example.
Features:
- Designed for cleaning shooting suppressors
- Can be used for strippable and non-strippable suppressors
- Safe for metal
- Provides excellent protection against wear and deposits
- Formulated with surfactants as well as corrosion inhibitors to prevent metal corrosion
- Works well without the need to heat the preparation
- Large capacity 600 ml
-
Scabbard for wz. 98 knife
€ 11,90 Add to cartScabbard for wz. 98 knife
Knife sheath wz. 98 made of durable plastic. Equipped with two lugs 32 mm and 60 mm wide and two holes for the tape, thanks to which it can be attached to the belt.
Features:
- Scabbard for combat knife wz. 98
- Made of high-impact plastic
- Lugs for mounting on belts up to 32 mm and 60 mm wide
- Two holes for webbing, rope or paracord
- Spring clip securing the knife in the scabbard
- Comes with nylon rope
-
Knife wz. 98Z – Serrated – Black
€ 58,90 Add to cartKnife wz. 98Z – Serrated – Black
Excellent wz. 98 knife, popular among the soldiers of the Polish Army, scouts and fans of survival. Partially serrated blade with a length of 173 mm and a thickness of 5 mm is made of 3H13 tempered spring steel.
Steel: tempered spring steel
Blade length: 175 mm
Overall length: 295 mm
Blade thickness: 5 mm
Weight: 263 g -
MFT – EvolV 3 Comp for .223/5,56 mm – E2ARMD1-BL
€ 56,90 Add to cartMFT – EvolV 3 Comp for .223/5,56 mm – E2ARMD1-BL
Compensator that reduces recoil force with 4 ports. Two ports on either side direct gas horizontally, keeping recoil to a minimum. Three front teeth help direct the remaining gas and shock forward away from the shooter. All of these elements add up to a very comfortable compensator for indoor and outdoor shooters.
Technical data Material 416 stainless steel Length 50 mm Outside diameter 20 mm Weight 50 g Color Black -
Strike Industries – JCOMP Gen2 Compensator for AR – .223 / 5,56 mm – SI-JCOMP2-223/5,56
€ 73,00 Add to cartStrike Industries – JCOMP Gen2 Compensator for AR – .223 / 5,56 mm – SI-JCOMP2-223/5,56
Compensator designed for AR carbines of .223/5.56 mm calibre.
Features:
– Two-chamber design effectively neutralizes recoilTechnical data:
– weight: 101 g
– length: 65 mm
– external diameter: 22 mm
– internal diameter: 6,6 mm
– thread: 1/2-28
– calibre: .223 / 5.56 mm -
CZ 75/85/Shadow 1 Recoil Spring Buffer
€ 8,00 Add to cartCZ 75/85/Shadow 1 Recoil Spring Buffer
The recoil reducer is designed for the CZ 75 stainless steel full‑length guide rod, compatible with CZ 75/85/Shadow 1 pistol models. This accessory is intended to reduce recoil and extend the service life of the firearm.
-
CMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Flat – 1/3 lb – 91504
€ 259,00 Add to cartCMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Flat – 1/3 lb – 91504
A cartridge-style drop-in trigger for AR15/AR10 platform carbines in the small pin (0.154″) variant from CMC Triggers. It allows modifying the trigger tongue assembly according to the user’s needs. The trigger tongue has a factory-set trigger pull force at a preset value, which is not subject to modification. After replacing the component, it is worth taking care to properly clean the remaining parts and use lubricants for weapon maintenance.
Technical data
Compatibility: AR15 / AR10
Trigger type: Two Stage
Trigger tongue: Curved
Trigger pull: 2 lb (0,9 kg)
Measure of microscopic irregularities (RMS) 1-2 µin (25-50 nm)
Material: 8620 carbon-nickel steel alloy S-7 steel 7075-T6 aircraft aluminum
Weight: 79 g
Color: Silver -
CMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Curved – 1/3 lb – 91502
€ 259,00 Add to cartCMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Curved – 2/2 lb – 92502
A cartridge-style drop-in trigger for AR15/AR10 platform carbines in the small pin (0.154″) variant from CMC Triggers. It allows modifying the trigger tongue assembly according to the user’s needs. The trigger tongue has a factory-set trigger pull force at a preset value, which is not subject to modification. After replacing the component, it is worth taking care to properly clean the remaining parts and use lubricants for weapon maintenance.
Technical data
Compatibility: AR15 / AR10
Trigger type: Two Stage
Trigger tongue: Curved
Trigger pull: 2 lb (0,9 kg)
Measure of microscopic irregularities (RMS) 1-2 µin (25-50 nm)
Material: 8620 carbon-nickel steel alloy S-7 steel 7075-T6 aircraft aluminum
Weight: 79 g
Color: Silver -
CMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Curved – 2/2 lb – 92502
€ 259,00 Add to cartCMC Triggers – Drop-in Trigger for AR15/AR10 Small Pin Competition – Two-stage – Curved – 2/2 lb – 92502
A cartridge-style drop-in trigger for AR15/AR10 platform carbines in the small pin (0.154″) variant from CMC Triggers. It allows modifying the trigger tongue assembly according to the user’s needs. The trigger tongue has a factory-set trigger pull force at a preset value, which is not subject to modification. After replacing the component, it is worth taking care to properly clean the remaining parts and use lubricants for weapon maintenance.
Technical data
Compatibility: AR15 / AR10
Trigger type: Two Stage
Trigger tongue: Curved
Trigger pull: 2 lb (0,9 kg)
Measure of microscopic irregularities (RMS) 1-2 µin (25-50 nm)
Material: 8620 carbon-nickel steel alloy S-7 steel 7075-T6 aircraft aluminum
Weight: 79 g
Color: Silver -
CMC Triggers – Drop-in Trigger for AR15/AR10 PCC Competition – Single Stage – Flat – 3.5 lb – 95503
€ 259,00 Read moreCMC Triggers – Drop-in Trigger for AR15/AR10 PCC Competition – Single Stage – Flat – 3.5 lb – 95503
A cartridge-style drop-in trigger for AR15/AR10 platform carbines in the PCC variant from CMC Triggers. It allows modifying the trigger tongue assembly according to the user’s needs. The trigger tongue has a pre-set trigger pull force at a preset value, which is not subject to modification. After replacing the component, it is worth taking care to properly clean the remaining parts and use lubricants for weapon maintenance.
Technical data
Compatibility: AR15 PCC / AR10 PCC
Trigger type: Single Stage
Trigger tongue: Flat
Trigger pull: 3.5 lb (1.6 kg)
Measure of microscopic irregularities (RMS) 1-2 µin (25-50 nm)
Material: 8620 carbon-nickel steel alloy S-7 steel 7075-T6 aircraft aluminum
Weight: 75 g
Color: Silver -
Swiss Eye – Tactical Glasses Defense – Smoke
Original price was: € 25,90.€ 19,90Current price is: € 19,90. Add to cartSwiss Eye – Tactical Glasses Defense – Smoke
Tactical glasses Defense from Swiss Eye. They feature a spacious visor mounted directly on the temples, which covers a large part of the face. It allows the wearer to shield not only the eyes, but also the area around the eye socket. Thanks to the lack of frames used, the user will have the full field of vision covered by the visor.
Features:
- Tactical goggles with a spacious visor
- Visor made of damage-resistant polycarbonate
- Visor coating to protect against fogging and scratching
- Low-profile, length-adjustable temples made of nylon
- Integrated soft rubber nose pad
- Full UVA/UVB/UVC protection
- Soft microfiber pouch and neck strap included
-
Swiss Eye – Raptor Shooting Safety Glasses
€ 38,90 Add to cartSwiss Eye – Raptor Shooting Safety Glasses
Swiss Eye Raptor are ballistic glasses with the possibility of replacing and mounting visors in three colors: tinted, clear and orange. They fully protect against harmful UVA, UVB and UVC radiation, and their construction is extremely lightweight , durable and comfortable, so you can use them for a long time without feeling pressure and discomfort.
The set includes;
– Raptor safety goggles
– Replaceable visor, smoke
– Replaceable visor, clear
– Replaceable visor, orange
– A microfibre bag -
Holosun – Magnifier 3x HM3X – Flip & Picatinny QD – Black – HM3X
€ 295,00 Add to cartHolosun HM3X Flip-Up Red Dot Magnifier
Mounted at the same height as the sight, it provides a constant 3× optical magnification. This allows a red dot sight to be converted into a low-magnification telescope. Unlike a spotting scope solution, the advantage of this setup is that the magnifier can simply be flipped aside when needed, making the primary sight immediately usable again.
Features:
- Magnification: 3×
- Mount: Picatinny QD
- Weaver QD
- VLT light transmission: 75%
- Exit pupil diameter: 73 mm
- Exit pupil distance: 69.8 mm
- Field of view: 7°
- Linear field of view at 100 m: 12.32 m
- Eye relief: 70 mm
- Diopter correction: +/- 3
- Protection class: IP67
- Housing material: Aluminum
- Finish: MAO (Micro Arc Oxidation)
- Dimensions: 99 × 41 × 60 mm
- Weight: 278 g
- Color: Black
-
Vector Optics – Open Collimator Frenzy-S 1x19x28 – MGT – Picatinny – Black – SCRD-66
€ 139,90 Add to cartVector Optics – Open Collimator Frenzy-S 1x19x28 – MGT – Picatinny – Black – SCRD-66
An open collimator with a custom curved lens and a 3 MOA size red dot from Vector Optics. The custom lens made it possible to achieve sight dimensions of 19×28 mm, which will make it easier to operate in both dynamic and static situations. The collimator owes its strength to its manufacture from 7075 T6 aluminum alloy.
Features:
- Open collimator with custom curved lens and Picatinny mount
- Compatible with the MGT standard
- Compact dimensions
- Low profile design despite mounting
- Red aiming point size of 3 MOA
- Powered by a single CR1632 battery, lasts up to 50,000 hrs
- Constructed of 7075 T6 aluminum
- Meets IPX7 waterproofing class standards
- Motion sensor to save batteries
-
Vector Optics – LPVO Scope Tauron 1-6×24 SFP – VTA-9 MIL – Black – SCFF-63
€ 319,00 Add to cartVector Optics – LPVO Scope Tauron 1-6×24 SFP – VTA-9 MIL – Black – SCFF-63
Tauron LPVO scope with variable magnification from 1 to 6x from Vector Optics. It features a 24mm multi-coated objective lens. It uses a VTA-9 MIL glass-etched target reticle with an illuminated aiming point with 6 levels of brightness. The illuminated aiming point is powered by a single CR2032 battery. The scope is made of 6061-T6 aircraft aluminum alloy.
Features:
- Tauron LVPO scope with a 24mm objective lens
- Features variable magnification from 1 to 6x
- VTA-9 MIL front sighting reticle on the FFP foreground
- Illuminated aiming point in red color
- Aiming point with 6 degrees of brightness
- Powering the illumination with a CR2032 battery
- Body made of 6061 T6 aircraft aluminum
- Shock resistance up to 1000 G
- Meets the requirements of waterproof class IP67
- Wide field of view at a distance of 100m, even at 6x zoom
- Diopter adjustment from -3 to +2
- Horizontal and vertical aiming crosshair adjustment 60 MIL
- Adjustment by 1/10 MRAD per click
- Output pupil offset at a distance of 100 mm
-
Holosun – HS510C Open Reflex Sight & HM3X Magnifier Set
€ 665,00 Add to cartHolosun – HS510C Open Reflex Sight & HM3X Magnifier Set
A set of Open Reflex HS510C Multi Reticle red dot sigth with HM3X magnifier with x3 zoom.
The set is equipped with a Picatinny-compatible QD mount that makes attaching the red dot sight and magnifier easy and very fast.
The user can choose from three aiming points in the red dot sight – a 2 MOA dot, a 65 MOA circle and a combination of these. The red dot sight is equipped with a solar panel to reduce battery consumption. In addition, the solar panel has a function to automatically adjust the brightness of the aiming point.
The magnifier with 3x zoom has dioptric adjustment. The QD mount, on which the magnifier is placed, has a Flip-Up hinge, which allows you to fold or unfold the device very quickly.
Features of the HS510C sight:
- Field of view wider than with closed sights
- Advanced LED technology that features low power consumption, thus providing up to 50,000 hours of operation on a single battery
- Multiple Reticle System – a choice of three target points
- System based on a single diode, does not affect zeroing
- Operates in automatic (default) or manual mode
- Built-in solar cell allows operation even when battery is low
- Light sensor function to adjust the spot intensity according to the light
- Durable lens with advanced multi-layer coatings
- No parallax
- Motion sensor to wake up the device from sleep mode
- Function of remembering the last used target mark and its intensity
- Low battery indication (target mark starts blinking slowly)
- Lightweight and durable housing made of 6061 aluminum and titanium
- Quick release QD buckle
- Waterproof to IP67 standard
Features of HM3X Magnifier:
- Durable anodized aluminum housing
- Meets IP67 water and dust resistance standard
- Provides 3x image magnification
- Highly transparent lenses
- Dioptric adjustment
- QD mount with Flip-Up hinge
Included:
- HS510C Reflex Sight
- Magnifier HM3X
- Riser for sight
- Riser for magnifier
- Spare battery tray for sight (with screws)
- Torx key
- Adjustment key
- Microfiber cloth
- Transport case
Holosun Limited Lifetime Warranty
-
UTG – Gunsmith’s key for AR15
€ 41,50 Add to cartUTG – Gunsmith’s key for AR15
A gunsmith wrench designed for use with the AR15 made of phosphate-coated steel. It has a wrench adapted to the UTG PRO Super Slim Free Float barrel nut, two flat wrenches – 3/4 “and 7/8” compatible with muzzle devices, a delta ring wrench, a ring wrench, a flat wrench for mounting the A2 stock and a 5/8 “wrench. to the buffer guide nut.
Features:
- Made of steel with a phosphate coating
- Compatible with torque wrench
- A wrench adapted to the UTG PRO Super Slim Free Float barrel nut
- 5/8 “wrench for buffer guide nut
- Two flat wrenches – 3/4 “and 7/8” compatible with muzzle devices
- “delta ring” nut wrench
- Ring spanner for assembly / disassembly of the A2 flash hider
- A flat wrench for assembling / disassembling the stock A2
Weight 221 g
-
UTG – Bipod Recon 360 TL – 8″ – 12″ – Picatinny
€ 139,00 Add to cartUTG Recon 360 TL Bipod, 8″–12″, TL-BP03-B
UTG Recon 360 TL Bipod 8″–12″ is designed for shooting enthusiasts seeking a stable and high-quality bipod. Ideal for hunting, target practice, and tactical applications. The bipod’s construction allows for full 360° panning and up to 15° multi-directional tilting. Panning and tilting tension can be easily adjusted to your preference.
Adjustable height from 8 to 12 inches and rubberized feet ensure comfort, especially on uneven terrain. The minimum height at a 90° angle without extension is sufficient for AR-style carbines even with 40-round magazines.
Features:
- Made of aircraft-grade aluminum
- Adjustable tilt angle
- Head allows for 360° panning
- Can be tilted up to 15° in four directions
- Standard Picatinny mount
- Equipped with non-slip rubber feet
- 3-position folding legs
- Height adjustment 8”–12” (20.5–30.4 cm)
- Lightweight and durable construction
- Weight 320 g
-
UTG – Bipod Recon 360 TL – 8″ – 12″ – M-LOK
€ 139,00 Add to cartUTG – Bipod Recon 360 TL – 8″ – 12″ – M-LOK
Bipod mounted on the M-LOK rail made of steel, durable aluminum and rubber. It is equipped with a height adjustment in the range of 8 ” – 12 ”. The foldable legs of the bipod can be locked in 1 of 3 positions. Swivel adjustment is 360° and 15° forwards, backwards and sideways.
Features:
- Designed for mounting on M-LOK® handguards
- Construction of durable materials
- Adjustable height from 8″ – 12″
- 3-position foldable legs
- Equipped with non-slip rubber feet
- It has a head that can rotate 360° and tilts forward, backward or sideways in the range of 15°
- Open angle 50°
- Centrally located tension lever
- Includes an Allen key for mounting the bipod
- Weight 416g
NOTE: To ensure proper operation of the bipod ball joint, during the first use, move it to the limits of the range and thus properly distribute the proprietary lubricant.
