PRODUCTS
-
Leatherman Black Wave+ Black
€ 138,90 Add to cartLeatherman Black Wave+ Black Multi-Tool
The Leatherman Black Wave+ is a durable and proven multi-tool that keeps essential tools for everyday repairs and demanding tasks always at hand. This 18-in-1 model is suitable for cutting, trimming, tightening, and wire work. Tools can be opened with one hand, which is helpful when your other hand is busy or when wearing gloves. For home maintenance, the job site, or weekend repair projects, it offers a compact toolset for your pocket or backpack.
Features
- 18 integrated tools covering common repair, cutting, and fastening tasks in one compact multi-tool
- One-handed access to tools for faster work, even with gloves
- Primary blades are made of 420HC stainless steel with a hardness of 55–59 HRC, providing reliable edge retention
- Locking blade and locking tools for controlled and safer use
- Spring-action scissors for smoother, fatigue-reducing cutting
- Built-in wire cutters for electrical and general maintenance work
- Black oxide coating on the blade, frames, tools, and fasteners for a durable and low-reflectivity surface
- Sheath sold separately, allowing the user to choose their preferred carrying method
Manufacturer warranty: 25 years
Manufacturer: USA
https://youtu.be/TuaAsoscXyY
-
Daniel Defense 1 O’clock Offset Rail (Rock & Lock)
€ 74,90 Add to cartDaniel Defense 1 O’clock Offset Rail (Rock Lock)
The Daniel Defense 1 O’clock Offset Rail is optimized for mounting miniature red dot optics at the 1 o’clock (right-hand) or 11 o’clock (left-hand) positions for quick, non-magnified transitions when using magnified primary optics on AR-style rifles with MIL-STD-1913 rails. The geometry allows for zero cheek weld shift during transition, facilitating ultra-fast transitions from magnified to non-magnified optics and back. The 1 O’clock Offset Rail can also be used to mount various lights or other MIL-STD-1913 rail-mounted accessories. By flipping the part, a light can be positioned for use with a vertical foregrip.
-
Vector Optics – Continental x6 6-36x FFP PRS Rifle Scope – VET-MBR 2 – Black – SCFF-70
€ 775,00 Add to cartVector Optics – Continental x6 6-36x FFP PRS Rifle Scope – VET-MBR 2 – Black – SCFF-70
The Vector Optics Continental scope, with a base magnification factor of x6, offers variable magnification from 6–36x. This design is suitable for both shooters and hunters due to the ability to adjust magnification according to the situation. The 56 mm diameter lens has a high visible light transmission of 90%.
The manufacturer has equipped the scope with a VET-MBR 2 reticle featuring a red illuminated aiming point in the first focal plane (FFP). It has lines corresponding to the given MIL value regardless of magnification. This is possible due to the reticle’s position in the first focal plane, meaning it scales according to the magnification range.
Features:
- Continental rifle scope with 6x magnification
- Precise 1/10 MIL per click adjustment ideal for PRS competitions
- Magnification range 6–36x
- 56 mm objective lens diameter
- Illuminated reticle on VET-MBR 2
- FFP first focal plane reticle
- Schott HT lenses with FMC coating
- 90% visible light transmission
- Shock resistance up to 1,000 G
- 11-step reticle illumination adjustment
- Durable aluminum housing with IP67-rated seal
- 34 mm tube diameter compatible with Picatinny standard
- Nitrogen-filled interior
Included:
- Continental range
- Picatinny rail mount
- Lens cover
- Lens cover
- User manual
-
BC ARMS – Ballistic Insert Archangel Soft K2 15 x 20 cm – Set of 2 – BCA-SOFT-K2-15×20
€ 215,00 Add to cartBC ARMS – Ballistic Insert Archangel Soft K2 15 x 20 cm – Set of 2 – BCA-SOFT-K2-15×20
A smaller version of the full-size BC ARMS Archangel Soft K2 ballistic insert. The 15 x 20 cm dimensions allow the soft ballistic insert to be used for side torso protection. Tactical vests or cummerbunds with appropriate pockets are ideal for carrying these inserts.
Designed for freedom of movement and low weight while providing adequate ballistic protection. Weighing approximately 250 g, it offers ballistic protection against 9×19 mm rounds at speeds up to 470 m/s and 7.62×25 mm rounds at speeds up to 420 m/s. It also provides fragmentation protection without significantly weighing down the vest.
The soft and flexible design allows the insert to fit most body types. When tested against the specified calibers, the insert showed less than 20 mm of backface deformation, minimizing the negative effects of impact.
This product is intended for the civilian market.
Features:
- Set of two soft Archangel ballistic inserts for side torso protection
- Insert size 15 x 20 cm
- Complies with PN-V-87000:2011 K2 level (NIJ IIIA)
- Does not restrict freedom of movement
- Lightweight (approx. 250 g) for minimal burden on the user
- Soft edge and body-side cover
- Backface deformation under 20 mm
- Especially suitable for plate carriers and cummerbunds
-
Gerber – Stakeout Spark Multi-Tool – 10 Tools – Coyote Brown – 1070226
€ 89,00 Add to cartGerber – Stakeout Spark Multi-Tool – 10 Tools – Coyote Brown – 1070226
The Gerber Stakeout multi-tool features 10 tools useful for various tasks. The tool has an integrated carabiner that allows it to be attached to the belt loop of tactical pants or other outdoor gear. The Stakeout Spark model features a dedicated tent stake puller hook and a ferro rod inside the handle that can be struck with the contoured back of the saw.
This lightweight stainless steel multi-tool is also easy to carry via its rigid clip. The handle is textured and features a ruler with centimeter and inch scales. The pliers operate smoothly, aiding in the handling of the small precision jaws. The plain edge blade is black-coated and held in place by a Liner Lock.
Features:
- Multi-tool with hook and lock
- Total of 10 useful tools for various tasks
- Integrated carabiner or clip for carrying
- Textured handle and ruler with centimeter and inch scales
- Dual-surface combination pliers and chisel
- Edge on the back of the saw for striking a ferro rod
- Black-coated tools
Tools and functions:
- Needle nose pliers
- Standard pliers
- Wire cutter
- Tent stake puller hook
- Bottle opener
- Stainless steel blade
- Awl
- Ruler in handle
- Serrated saw
- Ferro rod striker edge
- Striking awl
- Integrated carabiner
https://youtu.be/d_Q1GvD7nTQ
-
BC ARMS – Ballistic Plate Patrol K K2+ – Naistele – Suurus M – BCA-PATROL-K
€ 333,00 Add to cartBC ARMS – Ballistic Plate Patrol K K2+ – For Women – Size M – BCA-PATROL-K
The BC ARMS ballistic plate was created primarily with female uniformed officers in mind. Its design takes into account the key parameters required for daily use, namely low weight and sufficient ballistic protection. Weighing approximately 600 g, it offers ballistic protection against 9×19 mm rounds at speeds up to 470 m/s and 7.62×25 mm rounds at speeds up to 570 m/s. It meets IIIA+ and K2 standards.
The plate is designed to meet the SAPI (Small Arms Protection Insert) standard. This means it fits perfectly with Plate Carrier vests. The plate is designed with female anatomy and silhouette in mind, which is evident in the curvature and contouring used. The plate’s profile is multi-faceted and tapered, improving its fit for most body types.
Compared to the calibers tested on it, the plate showed less than 20 mm of backface deformation, which should minimize negative side effects from impacts.
This product is intended for the civilian market.
Features:
- Ballistic plate for women, meeting IIIA+ and K2 standards
- Designed with female anatomy and figure in mind
- Complies with PN-V-87001:2011 standard
- Honeywell ballistic material
- Soft cover and edge on the body side
- Weight approx. 600 g
- Backface deformation under 20 mm upon impact
- Complies with SAPI standard
- Especially suitable for plate carriers
- Size M plate (300 x 240 mm)
-
BC ARMS – Ballistic Plate Archangel Soft K2 – Soft – Size M – BCA-SOFT-K2
€ 222,00 Add to cartBC ARMS – Ballistic Plate Archangel Soft K2 – Soft – Size M – BCA-SOFT-K2
BC ARMS ballistic insert designed primarily for uniformed officers. It is engineered for freedom of movement and low weight while providing adequate ballistic protection. Weighing under 400 g, it offers ballistic protection against 9×19 mm rounds at speeds up to 470 m/s and 7.62×25 mm rounds at speeds up to 420 m/s.
The insert is manufactured according to the SAPI (Small Arms Protective Insert) standard, making it ideal for plate carriers. The soft and flexible design allows it to conform to most body types. Compared to tested calibers, the backface deformation was under 20 mm, minimizing the negative side effects of an impact.
This product is intended for the civilian market.
Features:
- Soft Archangel ballistic insert meeting the K2 level PN-V-87000:2011 standard (NIJ IIIA)
- Allows freedom of movement
- Lightweight design (under 400 g) does not burden the user
- Soft cover and edge on the body-facing side
- Backface deformation under 20 mm
- Complies with SAPI standard
- Especially suitable for plate carriers
- Size M insert
-
BC ARMS – Ballistic Plate Patrol A K2+ – Size M-L-XL – BCA-PATROL-A
€ 320,00 Add to cartBC ARMS – Ballistic Plate Patrol A K2+ – Size M-L-XL – BCA-PATROL-A
The BC ARMS ballistic plate was designed primarily for uniformed service officers. Key parameters for daily use—low weight and sufficient ballistic protection—were prioritized. Weighing approximately 600 g, it provides protection against 9×19 mm rounds at speeds up to 420 m/s and 7.62×25 mm rounds at up to 550 m/s. It meets NIJ IIIA+ and K2 standards.
The plate is designed to meet SAPI (Small Arms Protective Insert) standards, making it ideal for plate carriers. Its multi-curve profile ensures a better fit for most body types. During testing with specified calibers, the plate showed backface deformation of less than 20 mm, minimizing blunt force trauma.
This product is intended for the civilian market.
Features:
- Ballistic plate meeting IIIA+ and K2 standards
- Honeywell ballistic material
- Soft cover and edge on the body side
- Weight approx. 600 g
- Backface deformation under 20 mm upon impact
- Complies with SAPI standard
- Especially suitable for plate carriers
- Sizes: M 290 x 240; L 330 x 260; XL 355 x 280 (specify size when ordering)
-
Target patches – heavy-duty – 22 mm – 2000 pcs – Brown
€ 4,50 Add to cartTarget patches – heavy-duty – 22 mm – 2000 pcs – Brown
22 mm target patches feature a stronger adhesive than standard patches and are made from waterproof material.
The heavy-duty adhesive allows for use in extreme conditions (outdoors, wet and cold weather) without the risk of peeling off.
The larger diameter covers hits more effectively and sticks more securely, preventing patches from coming loose during subsequent shots.
Product details:
- Outer roll diameter: 96 mm
- Inner roll diameter: 26 mm
- Roll width: 25 mm
- Patch diameter: 22 mm
- Quantity per roll: 2000 pcs
- Patch color: Brown / Tan
-
Target Patches – heavy-duty – 22mm – 2,000 pcs – White
€ 4,50 Add to cartTarget Patches – heavy-duty – 22mm – 2,000 pcs – White
These 22mm target patches feature a stronger adhesive than standard patches and are made from waterproof material.
The heavy-duty adhesive allows for use in extreme conditions (outdoors, wet and cold weather) without the risk of peeling off.
The larger diameter covers hits more effectively and sticks more securely, preventing patches from coming loose during subsequent shots.
Product details:
- Outer roll diameter: 96 mm
- Inner roll diameter: 26 mm
- Roll width: 25 mm
- Patch diameter: 22 mm
- Quantity per roll: 2000 pcs
- Sticker color: White
-
Vector Optics – Picatinny 45° Mount for Pistol Red Dot Sights
€ 28,90 Add to cartVector Optics – Picatinny 45° Mount for Pistol Red Dot Sights – Black – SCFRM-29
Universal offset mount for pistol red dot sights by Vector Optics. Designed for mounting a secondary sight at a 45° angle on an AR Picatinny rail. It is primarily compatible with the Vector Optics Frenzy series, as well as sights following the MGT/MOJ/TEK/GIN footprint standards. It is made of 7075-T6 aluminum with an anodized finish.
The 45° offset allows for a quick transition from the primary optic to a backup red dot sight. Additionally, the 45° configuration enables intuitive weapon canting without compromising ergonomics in dynamic situations.
Features:
- Universal Picatinny rail mount for pistol red dot sights
- Compatible with MGT/MOJ/TEK/GIN standards
- 45° offset angle
- Enables quick transition from primary to secondary sight
- Made of 7075-T6 aluminum
- Anodized finish
- Dimensions 59 x 52 x 24 mm
- Mount base dimensions 52 x 28 mm
- Weight 36 g
- Color: Black
-
Earmor M20T Pro Active Earbuds – Bluetooth – 30 dB
€ 93,50 Add to cartEarmor M20T Pro Active Earbuds – Bluetooth – 30 dB
Earmor M20T Pro active hearing protectors are upgraded with new features compared to the base M20T model. They feature Clear Voice Tracking technology, which improves voice recognition in the wearer’s environment and ensures better communication quality. They also feature Bluetooth 5.4 connectivity for music playback and call management.
Designed as lightweight electronic earbuds, the device features two operating modes: with and without Bluetooth. The first allows for audio playback and conversation, while the second transmits ambient sounds in three scenarios. They effectively reduce noise over 82 dB, with a noise response time of 1 millisecond.
The M20T Pro earbuds have a Noise Reduction Rating (NRR) of 30 dB. This is achieved through various sizes of eartips that fit snugly in the ear canal. These hearing protectors are perfect for noisy environments like shooting ranges, construction sites, and production halls. The electronic system automatically turns off the device after two hours of inactivity to save battery.
Features:
Noise Reduction Rating (NRR) 30 dB
Active noise suppression over 82 dB
Bluetooth version 5.4
Speaker diameter 10 mm
Speaker power 3 mW
Speaker impedance 16 ohms
Headset microphone Omnidirectional
Earbud battery capacity 2 x 65 mAh
Charging case battery capacity 500 mAh
Runtime with case charging up to 10 hours
Protection class IPX4
Charging port on case USB-C
Charging case dimensions 85 x 53 x 40 mm
Earbud dimensions 29 × 23 × 34 mm
Charging case weight 66 g
Single earbud weight 7 g
Color Blackhttps://youtu.be/kVPm-do9agM
-
Bravo Concealment IWB Belt Clips for DOS Holsters
€ 29,50 Add to cartBravo Concealment IWB Belt Clips for DOS Holsters
Polymer belt clips for Bravo Concealment Torsion/DOS holsters. These allow users to lower the overall profile of their IWB holster or convert an OWB holster to IWB. Installation is relatively simple, and the manufacturer has included the necessary screws and rubber washers.
Features:
- Belt clips for Torsion/DOS holsters
- Low-profile polymer holster mounting hardware
- Lightweight yet highly durable
- Allows for a lower profile on IWB holsters
- Allows converting OWB holsters to IWB
- Screws and rubber washers included
-
Bravo Concealment OWB Holster – Sig Sauer P320 Full
€ 39,50 Add to cartBravo Concealment OWB Holster – Sig Sauer P320 Full, Right-Handed
Red dot compatible. Friction-fit holster with smooth adjustment.
Fits:
Sig Sauer P320 Full;
P320 M17 9/40;
P320 RXP 9/40;
P320 RXP X-Full Size 9/40;
P320 X-VTAC Full Size 9/40;
P320 Compact/Carry 9/40;
CZ Shadow 2
Can be converted to an IWB holster with separate belt clips.
Features:
- Friction-fit holster, safer than thumb-break holsters
- Durable polymer construction
- Custom-molded fit prevents rattling
- Adjustable retention screws
- 10° forward cant for discreet carry
- Smooth interior prevents firearm scratching
- Two 40 mm belt loops
- Right-handed version
- Interchangeable clips (sold separately) convert it to an IWB holster
- Red dot sight compatible
-
Fenix GL06 365 Tactical Pistol Light, Sig Sauer
€ 89,00 Add to cartFenix GL06 365 Tactical Pistol Light, Sig Sauer
Small and compact pistol light with quick-release. Fits many Sig Sauer models or pistols with a similar rail.
The Fenix GL06 365 tactical flashlight is designed for Sig Sauer pistols or firearms with a similar mounting rail. Made of durable aluminum. Features a CREE XPL LED with 600 lm output and 140 m range. Powered by a CR123A battery or rechargeable battery. QD mount.
The front battery compartment allows for the use of an ARB-L16-700UP rechargeable battery or a standard CR123A battery; using the rechargeable battery achieves the highest output. The device operates in two modes: standard and strobe.
The ambidextrous design allows for both right- and left-handed use. For proper installation on full-size pistols, the distance from the trigger guard to the furthest rail slot should be at least 43 mm. It is also compatible with select compact pistols. Its small size allows the weapon to be carried in appropriately fitted holsters.
Features:
Light source CREE XP-L HI LED
Maximum output 600 lumens
Intensity 4880 cd
Maximum runtime up to 1.5 hours
Mounting Sig Sauer rail (1913)
Maximum range up to 140 meters
LED lifespan 50,000 hours
Power source ARB-L16-700UP rechargeable battery or CR123A battery
Number of modes 2
Material Aluminum 6061-T6
Protection class IPX7
Length 61 mm
Body diameter 28 mm
Weight 69 g
Color BlackIncluded:
Fenix flashlight
Fenix ARB-L16-700UP rechargeable battery pack
Micro-USB cable
Spare O-ringhttps://youtu.be/79waQsoB50g
-
Fenix GL06 Tactical Pistol Light, Picatinny
€ 89,00 Add to cartFenix GL06 Tactical Pistol Light, Picatinny
Small and compact, quick-release pistol light. Fits many pistol models such as Glock and CZ (not compatible with Sig Sauer rails).
The Fenix GL06 tactical flashlight is designed for pistols equipped with Glock/CZ or Picatinny standard accessory rails. The flashlight body is made of 6061-T6 aluminum with a HAIII hard-anodized finish for increased durability. The light source is a CREE XP-L HI LED with a maximum output of 600 lm and a lifespan of up to 50,000 hours. It has a maximum beam distance of 140 meters and a runtime of up to 1.5 hours.
Features:
Light source CREE XP-L HI LED
Maximum output 600 lumens
Intensity 4880 cd
Maximum runtime up to 1.5 hours
Mounting Glock/CZ Picatinny
Maximum range up to 140 meters
LED lifespan 50,000 hours
Power source ARB-L16-700UP rechargeable battery or CR123A battery
Number of modes 2
Material Aluminum 6061-T6
Protection class IPX7
Length 61 mm
Body diameter 28 mm
Weight 69 g
Color BlackIncluded:
Fenix flashlight
Fenix ARB-L16-700UP rechargeable battery pack
Micro-USB cable
Spare O-ring
Glock rail key
Picatinny keyhttps://youtu.be/79waQsoB50g
-
RifleCX Clear Shot, Optics Cleaner + Cleaning Cloth 100 ml
€ 13,50 Add to cartRifleCX Clear Shot, Optics Cleaner + Cleaning Cloth 100 ml
RifleCX Clear Shot is a specialized cleaner for optics, sights, ballistic goggles, and even standard surfaces. The product effectively removes all dirt and prevents surface fogging. The formula is based on surfactants and silicone fluids. It is alcohol-free, making it safe for use on both glass and polymer surfaces.
The dispenser is equipped with a spray nozzle, ensuring even coverage with every press. The 100 ml capacity ensures long-lasting use even with intensive application. The cleaner comes with a 14.5 x 12 cm microfiber cloth featuring a printed RifleCX motif.
NOTE: The cleaner contains coumarin.
Features:
- Alcohol-free cleaning formula
- Safe for cleaning both glass and polymers
- Effectively removes dirt and prevents fogging
- Spray container
- Spray nozzle ensures even surface coverage
- Push-button closure protects against accidental dispensing
- Printed microfiber cloth included
-
Vector Optics – Liberty 20–60×60 Spotting Scope – Angled
€ 146,90 Add to cartVector Optics – Liberty 20–60×60 Spotting Scope – Angled SCSS-01
Angled spotting scope with variable 20–60×60 magnification. Porro / BAK-4 lenses. Zoom is adjusted via the ring next to the eyepiece, and focus with the knob on the right side of the scope. The body is made of ABS plastic with a rubber coating. The scope includes a tripod mounting plate. The tripod features a ring for height adjustment.
Features:
- Durable ABS plastic, rubber coated
- High 20–60x magnification
- High-quality prisms ensure excellent light transmission
- Porro / BAK-4 lens construction provides a clear and sharp image.
- Vertical tripod adjustment
- Anti-reflective tripod finish
- Tripod mounting plate
- Button compass on the inside of the lens cover
Technical data:
Zoom: 20–60x
Objective lens diameter: 60 mm
Field of view: 33.3–16.7 m @ 1000 m
Min. focus distance: 7 m
Length: 350 mm
Color: black
Weight: 730 g
-
Vector Optics – Frenzy & Sphinx Mount Base for HK USP
€ 30,90 Add to cartVector Optics – Frenzy & Sphinx Mount Base for HK USP SCRDM-07
A red dot sight mounting plate made entirely of aluminum. Replaces the original rear sight on HK USP pistols.
Features:
- Designed for specific mini red dot sights, such as the SCRA-10A Sphinx and Frenzy series.
- For use on firearms.
- Designed for HK USP pistols.
- Two mounting screws included.
- Full metal construction.
Technical data:
Distance between pins: 40 x 20 mm
Lenght: 46,1 mm
Thickness: 3 mm
Color: black
Weight: 12 g
-
Vector Optics – Frenzy 1x22x26 MOS punapunktsihik – Picatinny
€ 169,90 Add to cartVector Optics – Frenzy 1x22x26 MOS red dot
SCRD-36
Lightweight open type red dot sight with 3 MOA dot. The sight has 8 levels suitable for daylight and 2 modes suitable for use with night vision devices. A Picatinny rail mount is included.
Powered red dot sight made of 6061-T6 aluminum and powered by a single CR2032 battery. The waterproof unit is equipped with an auto shut-off feature to extend battery life.
Note: Product comes with a lifetime T-VIP manufacturer warranty.
Features:
- Sturdy 6061-T6 aluminum construction
- 3 MOA dot size
- Large viewfinder measuring 22 x 26 mm
- 10 aiming dot brightness levels – 8 for daylight and 2 for night vision
- Until 20,000 hr operation on one CR2032 battery in daylight mode on the setting with the weakest dot
- Low profile
- Ultralight weighing
- Weaver mount
- Waterproof standard IP67
- The device has a motion sensor with an automatic auto-off function after 2 minutes of inactivity
Included:
Red Dot Sight
Picatinny mount
Allen wrenches
Warranty card
Rubber sight cover
Cleaning cloth -
Vector Optics – Riflescope Constantine 1-8×24 – 30 mm – FFP
€ 319,00 Add to cartVector Optics – Riflescope Constantine 1-8×24 – 30 mm – FFP
FFP – SCFF-32
The Constantine 1-8×24 30 mm FFP riflescope offers a magnification of 1-8x and allows both open-eye aiming with both eyes open in the absence of magnification and accurate shooting at further distances. The 24 mm objective lens with FMC-coated lenses provides good light transmission and clear contrast and clarity. The scope’s small size does not interfere with carrying a weapon with optics in a tactical bag.
The field of view is 35.78-4.54 meters at 100 meters, and the eye relief of 90 mm allows comfortable aiming. The VOF-EHT sighting reticle with LED illumination offers 11 levels of intensity, allowing you to adjust it to the lighting conditions. The 100m parallax adjustment minimizes errors when shooting at medium distances.
The vertical and horizontal adjustment range is 35 MIL, with a 1/10 MIL clique value for accurate sight alignment. The 30mm diameter tube is made of anodized 6061-T6 aluminum. The design is shockproof to 1,000 G, IPX6 waterproof and nitrogen-filled to prevent lens evaporation. The scope comes with a Weaver mount and lens caps. Power is provided by a CR2032 battery.
Features:
- VOF-EHT reticle rifle scope with FFP layout
- Magnification of 1-8x allows fast targeting at medium distances
- 24mm objective lens provides good light transmission in a compact size
- Multi-coated lenses improve contrast and image clarity
- Field of view 35.78-4.54 m at 100 m
- Eye relief distance of 90 mm for comfortable aiming
- Illumination of the targeting reticle at 11 intensity levels
- 100m parallax adjustment minimizes errors when shooting at medium distances
- Vertical and horizontal adjustment range of 35 MIL
- 1/10 MIL click value allows for accurate sight alignment
- Shock-resistant design up to 1000 G, made of anodized 6061-T6 aluminum
- Waterproof to IPX6 rating
- Nitrogen filling to prevent lens fogging
- Weaver mount and lens caps included
- Powered by a CR2032 battery
-
Vector Optics – Red Dot Pistol Mount Base for Glock – SCRDM-01
€ 28,90 Add to cartVector Optics – Red Dot Pistol Mount Base for Glock – SCRDM-01
SCRDM‑01
Mounting plate for reflex sight made entirely of aluminum. Mounted in the place of the original rear sight in Glock type handguns.
Features:
- Made for specific mini red dot sights such as the SCRA-10A Sphinx and Frenzy series.
- For use on firearms.
- Designed for Glock pistols.
- Two mounting screws included.
- Made entirely of metal.
Features:
-
- Distance between poles: 40 x 20 mm
- Lenght: 46,1 mm
- Thickness: 3 mm
- Material: alumiinium
- Color: black
- Weight: 12 g
-
Smith & Wesson – Border Guard – SWBG1
€ 41,65 Add to cartSmith & Wesson – Border Guard – SWBG1
Folding knife with a safe Locking ropes and belts, and striker for the window.
Blade opens with a thumb stud on both sides, and locked steel blockade linerlock. Linings made of aluminum handles with non-slip fills in the black.
Removable metal clip, the ability to mount a knife on a belt, pocket edge.
Steel: 420
Blade Lenght: 112 mm
Blade thickness: 3,5 mm
Overall length: 251 mm
Weight: 252 g
-
RifleCX – Care Spray – Teflon – 200 ml
€ 9,80 Add to cartRifleCX – Care Spray – Teflon – 200 ml
Care spray preservative and repair preparation with DuPont Teflon. The main advantage of this product is its dedicated use for the maintenance of weapons and other surfaces. It is suitable for both metal and polymers. It creates a low-friction film and shines surfaces. It has conical and narrow tube nozzles. Thanks to the use of original DuPont Teflon, the formulation ensures quality at a high level.
The preservative-repair formula can also be used to clean other things such as long windcheaters, things or equipment in the workshop. The 500 ml can will last for a long time, so the user does not have to worry about sudden exhaustion of the product. It provides protection against abrasion, UV, aggressive chemicals, and is non-toxic and physiologically inert.
The product protects the coated surface from the adhesion of dirt and other deposits, further preventing deposition and the formation of new compounds. In addition, the agent has deep penetrating properties, which means that it will thoroughly cover the surface with which it comes into contact. The Teflon it contains facilitates replacement and heat protection, which translates into a longer life for parts coated with Care Spray.
Technical data
Capacity: 200 ml
Lubricant: Teflon
Height: 192 mm
Diameter: 52 mm
Tube length: 101 mm -
RifleCX – Gun Cleaner – 200 ml
€ 8,50 Add to cartRifleCX – Gun Cleaner – 200 ml
RifleCX – Gun Cleaner Dedicated gun cleaner for firearms. Designed to simplify and shorten the gun cleaning process. The gun cleaner with a special composition is released under high pressure so it will effectively remove dirt, carbon build-up, deposits of lead, copper, nickel, as well as oil and grease without the need to use a brush. Included with the cleaner is a tube that allows you to accumulate the stream, increasing its pressure and thus its effectiveness.
The cleaner evaporates quickly leaving a dry and clean surface. For further maintenance, you can use RifleCX 48306 maintenance and repair product or RifleCX 48308 gun oil. Gun cleaner does not damage plastic or wooden parts. It does not contain chlorinated solvents, which means it is safe for cleaning weapons, as well as, for example, long guns, ASG replicas and others.Capacity: 200 ml
